Dresser LS-2 Weld Fitting - Hot Tap & Line Stop
Dresser LS-2 Weld Hot Tap Fitting product photo
Dresser LS-2 Weld Hot Tap Fitting product photo
Dresser LS-2 Weld Hot Tap Fitting dimension drawing
Dresser LS-2 Weld Hot Tap Fitting dimension drawing
Dresser LS-2 Weld Hot Tap Fitting specification table
Dresser LS-2 Weld Hot Tap Fitting specification table
Dresser LS-2 Weld Hot Tap Fitting specification table
Dresser LS-2 Weld Hot Tap Fitting specification table
Dresser LS-2 Weld Fitting - Hot Tap & Line Stop
Dresser LS-2 Weld Hot Tap Fitting product photo
Dresser LS-2 Weld Hot Tap Fitting product photo
Dresser LS-2 Weld Hot Tap Fitting dimension drawing
Dresser LS-2 Weld Hot Tap Fitting dimension drawing
Dresser LS-2 Weld Hot Tap Fitting specification table
Dresser LS-2 Weld Hot Tap Fitting specification table
Dresser LS-2 Weld Hot Tap Fitting specification table
Dresser LS-2 Weld Hot Tap Fitting specification table

Dresser LS-2 Weld Hot Tap Fitting - Class 150, 285 PSI Gas

Body: Side Outlet
Bottom: Flat Bottom
Nominal Size - Part No.: 1-1/4 in - 6512-1513-00

Product variant with selected options does not exist!
$453.60
SKU: 6512-1513-00
Weight : 4.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Dresser · Gas Hot Tap Fitting
LS-2 Weld Hot Tap Fitting
LS-2 weld hot tap fitting, Class 150, 1-1/4 in to 12 in.
285 PSI Class 150
Class 1, 2, 3 and 4 locations
Natural Gas Service
1-1/4 in to 12 in
1.8-280 lb Weight
Overview

The LS-2 weld fitting welds directly to the main for hot taps and line stops, in plain body, side outlet and reduced branch builds, scarfed or flat bottom.

Application: Hot taps and line stops on steel gas mains.

  • Use with LS-2 completion plugs
What Ships and What It Needs to Run

Included: fitting.

Also needed: LS-2 completion plug and cap or blind flange to complete the installation.

Genuine Dresser equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month Dresser Warranty

Covered for 12 months from the date of purchase under Dresser’s published warranty terms.

Working Pressure

285 PSI at 100°F with completion plug and cap or blind flange installed.

Source: Dresser LS-2 Hot Tap and Line Stop Fittings Catalog (NGS-DPS-008). The rating on the product label is the actual rating of each part.

Before You Order. Confirm class, size and outlet. Welding to be performed by qualified personnel. Non-stock Dresser parts are not returnable without Dresser’s authorization, and ship time is confirmed when you order. Custom builds (other sizes, widths, gaskets or materials) are available: email sales@watermainsupply.com with the pipe OD, material and line content.
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
LS-2 Hot Tap and Line Stop Fittings Catalog (NGS-DPS-008)
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

Share E-mail

You May Also Like