Franklin Electric VR SpecPAK triplex three-pump pressure boosting system

Franklin Electric Pumps

The full Franklin Electric water systems range: VersaJet, SWJ Cyclone and convertible jet pumps for wells and cisterns; Turf Boss, FBSE and FBSEF self-priming pumps for irrigation and dirty water; BT4 and MH boosters, VersaBoost Pro and Inline Controls for constant pressure; VR vertical multistage pumps and SpecPAK packaged booster systems; AG, D, FAC, HC and XS centrifugal pumps; engine-driven, hydraulic and Fhoton solar pumps; FPS NC non-clog wastewater pumps; and Cerus X-Drive VFDs and 3-wire control boxes. Pump ends, repair kits and replacement motors are listed by Franklin order number. Send us your flow, head and supply and we will match the model. Call 1-888.510.4036.

229 products
Sort by:
Most relevant
Sort by:
Most relevant
Franklin Electric VersaBoost Pro Booster Pump
Franklin Electric VersaBoost Pro Constant Pressure Boosting System - NSF 61/372, VFD with FE Connect, 0.8-1.1 HP

Franklin Electric

Free Shipping $499 or more

Franklin Electric VersaBoost Pro Booster Pump

Price
From $1,491
Franklin Electric SubMonitor Three-Phase Motor Protection
Franklin Electric SubMonitor Connect three-phase motor protection relay

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubMonitor Three-Phase Motor Protection

Price
From $73.85
Franklin Electric 4 in Single-Phase 2-Wire Submersible Motor - 1/3-1.5 HP
Franklin Electric 4 in Super Stainless Motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Single-Phase 2-Wire Submersible Motor - 1/3-1.5 HP

Price
From $737.72
Franklin Electric NC Series Non-Clog Pump Repair Parts
Franklin Electric NC Series Non-Clog Pump Repair Parts

Franklin Electric

Free Shipping $499 or more

Franklin Electric NC Series Non-Clog Pump Repair Parts

Price
From $7.12
Franklin Electric Control Box Replacement Parts
Franklin Electric control boxes shown for reference; listing sells replacement relays, capacitors, overloads and contactors

Franklin Electric

Free Shipping $499 or more

Franklin Electric Control Box Replacement Parts

Price
From $32.05
Franklin Electric Single-Phase 3-Wire Control Box
Franklin Electric single-phase 3-wire submersible pump control boxes

Franklin Electric

Free Shipping $499 or more

Franklin Electric Single-Phase 3-Wire Control Box

Price
From $143.32
Franklin Electric DR Centrifugal Pump
Franklin Electric DR Series Close-Coupled Centrifugal Pump - Booster & Transfer Service, 1/2-2 HP

Franklin Electric

Free Shipping $499 or more

Franklin Electric DR Centrifugal Pump

Price
From $772.33
Franklin Electric Submersible Motor Leads - 4 in, 6 in and 8 in
Franklin Electric 4 in submersible motor, the motor family these leads fit

Franklin Electric

Free Shipping $499 or more

Franklin Electric Submersible Motor Leads - 4 in, 6 in and 8 in

Price
From $59.08
Franklin Electric SubDrive and MonoDrive Constant Pressure Controller
Franklin Electric SubDrive Connect NEMA 3R constant pressure drive

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubDrive and MonoDrive Constant Pressure Controller

Price
From $1,288.86
Franklin Electric SubDrive and MonoDrive Accessories
Franklin Electric SubDrive drive lineup these accessories fit: Utility, Connect and NEMA 4

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubDrive and MonoDrive Accessories

Price
From $47.08
Franklin Electric 6 in Submersible Motor - 5-60 HP
Franklin Electric 6in-Encapsulated-Motor 5-60 HP

Franklin Electric

Free Shipping $499 or more

Franklin Electric 6 in Submersible Motor - 5-60 HP

Price
From $2,453.49
Franklin Electric 4 in Tri-Seal Submersible Well Pump - 10-25 GPM, 1/2-1.5 HP
Franklin Electric Tri-Seal 4 in stainless steel submersible well pump

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Tri-Seal Submersible Well Pump - 10-25 GPM, 1/2-1.5 HP

Price
From $1,169.34
Franklin Electric 4 in Series V Submersible Well Pump - 10-25 GPM, 1/2-1.5 HP
Franklin Electric Series V 4 in submersible well pumps, stainless and thermoplastic

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Series V Submersible Well Pump - 10-25 GPM, 1/2-1.5 HP

Price
From $1,100.34
Franklin Electric 4 in 3200 Series Submersible Well Pump - 5-10 GPM, 1/2-1.5 HP
Franklin Electric 4 in stainless submersible pump, photo from the 3200 Series catalog page

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in 3200 Series Submersible Well Pump - 5-10 GPM, 1/2-1.5 HP

Price
From $1,187.34
Franklin Electric IGP-M Series Manual Grinder Pump - 2 HP, 1-1/4 in FNPT Discharge
Franklin Electric FPS IGP-M Series manual grinder pump

Franklin Electric

Free Shipping $499 or more

Franklin Electric IGP-M Series Manual Grinder Pump - 2 HP, 1-1/4 in FNPT Discharge

Price
From $1,869.47
Franklin Electric IGP Grinder Pump Accessories and Repair Parts
Franklin Electric FPS IGP Series grinder pumps, parts and accessories fit these pumps

Franklin Electric

Free Shipping $499 or more

Franklin Electric IGP Grinder Pump Accessories and Repair Parts

Price
From $8.21
Franklin Electric 56C TEFC Pump Motors
Franklin Electric 56C frame replacement pump motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric 56C TEFC Pump Motors

Price
From $470.05
Franklin Electric Cyclone Repair Parts
Franklin Electric Cyclone shallow well jet pump

Franklin Electric

Free Shipping $499 or more

Franklin Electric Cyclone Repair Parts

Price
From $100.40

Franklin Electric Pumps

Franklin Electric · Pumps, Motors, Drives & Controls

Franklin Electric Pumps

The full Franklin Electric water systems range in one place: jet pumps, Turf Boss and FBSE self-priming pumps, BT4 and MH boosters, VersaBoost Pro and Inline constant pressure, VR vertical multistage pumps and SpecPAK packages, AG, D, HC and XS centrifugals, engine-driven and solar pumps, NC non-clog wastewater pumps, Cerus X-Drive VFDs, control boxes, pump ends and genuine repair parts — sized and supported by Watermain Supply.

Franklin Electric VR SpecPAK packaged pressure boosting system with VR vertical multistage pumps
160+Franklin listings
5,400+Order numbers
1/3–75 HPPump motors
2,800 GPMLargest pump flow
750 ftVR head, to

Franklin Electric has built water-moving equipment since 1944, when E.J. Schaefer and T.W. Kehoe founded the company in Bluffton, Indiana and named it for Benjamin Franklin. It is best known for the submersible motor it pioneered, and today it designs and builds pumps, motors, drives and controls for residential, agricultural, commercial, industrial and municipal water, under the Franklin Electric, FPS, Little Giant and Pioneer Pump names, from its headquarters in Fort Wayne, Indiana.

Watermain Supply lists more than 160 Franklin Electric products and 5,400 order numbers: surface pumps from a 1/3 HP pump end to a 2,800 GPM frame-mount pump, packaged booster systems up to 2,400 GPM, VFDs up to 770 A, and the pump ends, seals, repair kits and replacement motors that keep installed Franklin pumps running. Every item is listed by Franklin order number, and our engineering-led selection matches it to your flow, head, supply and nameplate before you order. Call 1-888.510.4036 or email sales@watermainsupply.com. Genuine Franklin Electric equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.

Buying Franklin Electric from Watermain Supply

Four things to know before you pick a family.

Warranty

Franklin publishes the warranty per product family in the owner’s manual. Examples: convertible jet pumps and VR Series, 1 year from original purchase; end-suction, self-priming and engine centrifugals, 12 months from installation or 24 months from manufacture; SpecPAK packages, extendable to 36 months with an approved commissioning checklist. We confirm the term for your item with the quote.

Reliability

Stainless hydraulics on the VR and MH and a stainless shell on the BT4; stainless impellers across the convertible jets, AG, FAC and HC; drinking-water certification to NSF/ANSI 61 and 372 on the VR, VersaBoost Pro and SpecPAK packages; UL-listed control boxes. Repair kits and pump ends are sold by order number, so a Franklin pump is rebuilt, not thrown away.

Fit

The right Franklin pump is set by the duty point, the source and the supply, not by horsepower. Send the flow, the head or pressure, the depth to water or inlet pressure, the liquid and the voltage and phase. For a replacement, the nameplate model and order number settle it.

Size It Now

Use our calculators or send the numbers and we select against the Franklin curve.

Booster pump sizing calculator
Well and irrigation pump calculator
Request a quote · 1-888.510.4036

Franklin Electric Jet Pumps

Surface pumps that draw well, cistern or spring water up to the house with a 30/50 psi switch installed. Shallow well pumps lift from 25 ft; convertibles reach 100 to 120 ft with a matched deep well injector. All five are NSF/ANSI/CAN 372 certified.

Franklin Electric SWJ Cyclone thermoplastic shallow well jet pump

SWJ Cyclone

Shallow well · 1/2–1 HP

Non-corrosive thermoplastic with a self-cleaning injector screen and replaceable in-line nozzle and venturi. 75 psi, 120 °F.

Shop SWJ Cyclone →
Franklin Electric VersaJet cast iron shallow well jet pump

VersaJet & VersaJet Pro

Shallow well · 1/2–1-1/2 HP

Cast iron with the Quick-Change nozzle: retune from high pressure to high flow without opening the case. The Pro ships with three nozzles.

Shop VersaJet Pro →
Franklin Electric Convertible Pro RM2 jet pump

Convertible Pro RM2

Shallow or deep well · 1/2–1 HP

Stainless impeller, 56C motor, 150 psi rating, lifts from 100 ft and delivers up to 23 GPM. 1 HP three-phase model available.

Shop RM2 →
Franklin Electric C Series convertible jet pump

C Series

Shallow or deep well · 1/2–3/4 HP

Screw-in injector and bypass plug, stainless impeller on a 56J motor, up to 16 GPM and down to 120 ft with the matched injector.

Shop C Series →

Deep well conversions use the Franklin 4 in deep well injectors, listed by pump model and depth band from 20 to 120 ft. Full comparison and sizing: Franklin jet pumps.

Franklin Electric Self-Priming Pumps

Irrigation, sprinkler and transfer pumps that pull from a pond, lake, ditch or tank up to 25 ft below and re-prime themselves after the first fill.

Franklin Electric Turf Boss self-priming sprinkler pump

Turf Boss

Clean water · 1–5 HP

Cast iron sprinkler and irrigation pump with back pull-out service; to about 70 GPM at 1–2 HP and 150 GPM at 3–5 HP, with a stainless impeller, suction check valve and TEFC or 575V motors on the larger sizes.

Shop Turf Boss →
Franklin Electric FBSE self-priming effluent pump

FBSE

Dirty water · 1/2–3 HP

Semi-open cast iron impeller for fertilizer, salt water, dirty water and solids to 0.75 in. 126 GPM, 70 ft, liquid to 212 °F.

Shop FBSE →
Franklin Electric FBSEF self-priming pump with TEFC motor

FBSEF

Tough liquids · 1-1/2–7-1/2 HP

The bigger FBSE on a TEFC motor, up to 295 GPM, with 3 × 3 in ports from 5 HP, for dewatering and drainage.

Shop FBSEF →

Full comparison and sizing: Franklin self-priming and irrigation pumps.

Franklin Electric Booster Pumps & Constant Pressure

From a single-home booster to a four-pump commercial skid: raise city or well pressure, hold it constant as demand changes, and protect the pump while you do it.

Franklin Electric BT4 multi-stage booster pump

BT4 Multi-Stage Booster

5–45 GPM · 1/3–3 HP

Patented Tri-Seal floating stages and a stainless shell, 400 psi max discharge, 75 psi max inlet. Also in a cast iron build.

Shop BT4 →
Franklin Electric MH horizontal multi-stage booster pumps

MH Multi-Stage Booster

15, 30, 45 GPM · 1–2 HP

All 300-series stainless wet end, shut-off to 135 psi, fluid to 225 °F, 10 ft suction lift, UL 778. RO, filtration, washdown and irrigation.

Shop MH →
Franklin Electric DR close-coupled centrifugal pumps

DR Centrifugal

1/2–2 HP

Back pull-out close-coupled centrifugal in cast iron or stainless for circulation, booster, transfer, spraying and jockey duty.

Shop DR →
Franklin Electric VersaBoost Pro constant pressure booster

VersaBoost Pro

Constant pressure · 18 or 25 GPM

A 4 in encapsulated submersible pump-motor with VFD, check valve and tank built in: 14–80 psi, 45 dB, NSF/ANSI/CAN 61 and 372, four units in parallel.

Shop VersaBoost Pro →
Franklin Electric Inline Controls SWC, ADJ and CTL

Inline Controls

SWC · ADJ · CTL · to 3 HP

Flow-activated controls that replace the pressure switch and tank: start at 0.25 GPM, with dry-run, dead-head and over-pressure protection.

Shop Inline Controls →
Franklin Electric Inline SpecPAK packaged booster system

Inline SpecPAK

Duplex to quadplex · 90–300 GPM

Factory-packaged variable-speed booster for commercial and multi-residential buildings: stainless wetted parts, 7 in HMI, Modbus, UL 508A panel.

Shop Inline SpecPAK →
Franklin Electric VR SpecPAK booster skid

VR SpecPAK

15–50 HP per pump · to 2,400 GPM

Two to four VR pumps on one frame, each on its own Cerus X-Drive, PLC-staged, boost to 250 psi. Triplex · Quadplex.

Shop VR SpecPAK →

Full comparison and sizing: Franklin booster pumps and our booster pump sizing calculator.

Franklin Electric VR Vertical Multistage Pumps

In-line vertical multistage pumps with 316 stainless hydraulics and a cartridge seal, from 1VR to 95VR. VR models run at 3600 RPM; VRL models at 1800 RPM for quieter, lower-flow duty. Flow 5 to 500 GPM, head to 750 ft, liquid from 14 to 248 °F, NSF/ANSI 61 and 372.

Built for commercial and multi-family boosting, reverse osmosis and filtration, boiler feed, irrigation, cooling towers and industrial process water. The pump end carries its own thrust bearing, so it runs on a standard NEMA C-face motor, and every size has replacement stacks, seal kits and pump ends on our site.

Full comparison, model code decoder and sizing: Franklin VR vertical multistage pumps.

Franklin Electric Close-Coupled Centrifugal Pumps

End-suction pumps on JM or JP close-coupled motors for water supply, irrigation, circulation and municipal and industrial service. NPT or flanged, 1/3 to 75 HP, up to 2,000 GPM and 450 ft.

Franklin Electric AG Series centrifugal pump

AG Series

NPT or flanged · 1–75 HP

Stainless impeller, back pull-out, 900 GPM and 325 ft ceilings, 150 psi. 26 hydraulic models on our site.

Shop AG →
Franklin Electric D Series centrifugal pump

D Series

Threaded · 1/3–50 HP

DA, DB and DC hydraulics, 56C or JM motors, 650 GPM and 300 ft ceilings, 150 psi.

Shop D Series →
Franklin Electric FAC centrifugal pump

FAC

2 × 2 in NPT · 3–5 HP

CF8M stainless impeller, silicon-carbide seal faces, 150 GPM and 160 ft, rotatable volute.

Shop FAC →
Franklin Electric HC Series flanged centrifugal pump

HC Series

Flanged · 7.5–50 HP

Ductile iron volute, the highest head and pressure limits in the line: 1,900 GPM, 450 ft, 350 psi.

Shop HC →
Franklin Electric XS Series flanged centrifugal pump

XS Series

Flanged · 7.5–75 HP · 1800 RPM

The high-flow design: up to 2,000 GPM at up to 180 ft, 250 psi, split volute on the 6 × 8–13.

Shop XS →

Full comparison, all 57 models and sizing: Franklin close-coupled centrifugal pumps.

Engine-Driven, Hydraulic, Bare-Shaft & Solar Pumps

Franklin pumps for sites where the power comes from a gas engine, a hydraulic circuit, your own motor or engine, or the sun.

Franklin Electric FBSGF gas engine self-priming pump

Gas Engine-Driven

3.5–23 engine HP · to 400 GPM

FACGF, FNG-23V, FBSGF, FNSGF and FMIG with Briggs & Stratton, Honda or Kohler engines, for dewatering and water trucks.

Shop engine pumps →
Franklin Electric XS hydraulic motor drive pump

Hydraulic Drive

SAE B or C · to 1,000 GPM

XS 3×4-9 frames for a truck’s hydraulic motor, clockwise or counterclockwise, NPT or grooved.

Shop hydraulic pumps →
Franklin Electric FAOT bare-shaft frame-mount pump

Bare-Shaft

Your driver · to 2,800 GPM

FAOT, FACT, FBSTF, FMIT and XS frame-mount pumps coupled to your motor or engine by belt or direct drive.

Shop bare-shaft →
Franklin Electric Fhoton surface solar pump package

Fhoton SolarPAK

Solar · 1/2–1-1/2 HP

Fhoton controller, pump and flow switch for livestock water, turf irrigation and cistern boosting off-grid.

Shop Fhoton →

Full comparison and driver sizing: Franklin engine, hydraulic, solar and bare-shaft pumps.

FPS Non-Clog Wastewater Pumps

Submersible solids-handling pumps for raw sewage, effluent, irrigation and dewatering in commercial and industrial lift stations: semi-open ductile iron impeller, field-adjustable wear plate and dual silicon carbide seals with a seal-fail probe. cCSAus listed.

Franklin Electric FPS 3NC non-clog pump

FPS 3NC

3 and 5 HP · 3 in flange

555 GPM, 58 ft, 2.5 in spherical solids, single or three phase.

Shop 3NC →
Franklin Electric FPS 4NC non-clog pump

FPS 4NC

3 and 5 HP · 4 in flange

545 GPM, 49 ft, 3 in spherical solids, single or three phase.

Shop 4NC →
Franklin Electric FPS 4NCH non-clog pump

FPS 4NCH

7.5–20 HP · 4 in flange

948 GPM, 114 ft, 3 in solids, air-filled IE3 premium-efficient Class H motor, three phase.

Shop 4NCH →

Impellers, seals, bearings and stators: NC Series repair parts.

Franklin Electric Drives & Controls

The equipment between the power supply and the pump motor: Cerus X-Drive VFDs, the filtering that protects them, and the 3-wire control boxes that start Franklin submersible motors.

Franklin Electric Cerus X-Drive SUB VFD panel

X-Drive SUB & CEN Panels

NEMA 3R · 3–600 HP

Outdoor VFD pump panels with disconnect, reactor or choke and dV/dt filter; single-phase input models; low-harmonic IEEE-519 builds. CEN panel.

Shop X-Drive panels →
Franklin Electric Cerus X-Drive stand-alone VFD

X-Drive Stand-Alone

NEMA 1 · 3–770 A

For panel shops and MCCs; runs induction and MagForce motors, Modbus and BACnet built in, up to 8 drives in multi-pump control.

Shop X-Drive →
Franklin Electric 3-wire submersible control boxes

3-Wire Control Boxes

QD · CRC · Standard · Deluxe

1/3–15 HP boxes for Franklin single-phase 3-wire submersible motors, plus capacitors, relays and overloads.

Shop control boxes →
Franklin Electric FE Connect Bluetooth card for X-Drive

Reactors & Filters

3% / 5% · 2–750 A

Line and load reactors, dV/dt output filters, and X-Drive transducers, Modbus TCP/IP and FE Connect cards. Reactors.

Shop accessories →

Full comparison, box part numbers and drive sizing: Franklin control boxes and drives. Submersible pump protection: Pumptec.

Franklin Electric Pump Families at a Glance

Published ranges from Franklin literature and our listings. Flow and head are family ceilings, not a single duty point.

Family Type HP Flow up to Head or pressure Best for
Water supply and irrigation
Jet pumps Shallow and convertible jet 1/2–1-1/2 23 GPM (RM2) Lift 25 ft; 120 ft deep well Homes, cabins, farms, cisterns
Turf Boss Self-priming, clean water 1–5 ~150 GPM 25 ft lift; 71 psi shut-off Sprinklers, irrigation, transfer
FBSE / FBSEF Self-priming, dirty water 1/2–7-1/2 295 GPM 25 ft lift; 70 ft (FBSE) Fertilizer, salt water, dewatering
Pressure boosting
BT4 Horizontal multistage 1/3–3 45 GPM 400 psi max discharge High-pressure boosting, misting
MH Horizontal multistage, stainless 1–2 45 GPM 135 psi shut-off RO, filtration, washdown
VersaBoost Pro Constant pressure system 0.8–1.1 25 GPM 14–80 psi set point Homes, private wells, cisterns
VR / VRL Vertical multistage 1/2–75 500 GPM 750 ft Commercial boosting, RO, boiler feed
SpecPAK Packaged booster skid 1.5–50 per pump 2,400 GPM 250 psi boost (VR) Buildings, campuses, municipal
Transfer, circulation and wastewater
AG, D, FAC Close-coupled end suction 1/3–75 900 GPM 325 ft Water supply, irrigation, circulation
HC, XS Flanged end suction 7.5–75 2,000 GPM 450 ft (HC); 350 psi Municipal, mining, high flow
Engine and bare-shaft Engine, hydraulic, frame mount 3.5–23 engine HP 2,800 GPM 360 ft (XS 13 in) No power, water trucks, OEM skids
NC non-clog Submersible solids handling 3–20 948 GPM 114 ft Sewage, effluent, lift stations
Also comparing brands? We supply Franklin Electric alongside Grundfos, Goulds, A.Y. McDonald (Baker), DAB and Davey, so we can quote the pump that fits rather than the one we happen to carry. Each Franklin collection page carries an honest, side-by-side comparison — for example Franklin VR against Grundfos CR and CRN, Turf Boss against the Goulds GT Irri-Gator and A.Y. McDonald 84000, the VersaJet against the Grundfos JP and DAB JET, and the Cerus X-Drive against the Grundfos CUE and A.Y. McDonald AutoDRIVE.

Which Franklin Electric Pump Do You Need?

Start from the job. We confirm the final model against the Franklin curve before you order.

Job Start with Key number to send
House water from a shallow well or cistern VersaJet or SWJ Cyclone Depth to water under 25 ft
House water from a deeper well C Series or RM2 with injector Depth to water, well diameter
Steady pressure in a home VersaBoost Pro or Inline Controls Peak GPM and set pressure
Commercial or multi-family boosting VR or SpecPAK Fixture units, floors, inlet psi
Sprinklers from a pond or lake Turf Boss Largest zone GPM, lift, head psi
Fertilizer, salt or dirty water FBSE or FBSEF Liquid, solids size, lift
No power at the site Gas engine pump or Fhoton GPM, head, solids
Sewage or effluent lift station 3NC, 4NC or 4NCH GPM, head, solids, voltage
Failed Franklin pump or motor Repair parts or pump ends Nameplate model and date code
How we size it. Required boost = target pressure at the highest outlet + 0.433 psi per foot of rise + friction loss − inlet pressure; convert psi to feet of head with × 2.31. We read that head at your design flow on the Franklin curve and pick the model that lands near its best-efficiency point. See Pump Curve 101, the booster calculator and the pressure tank calculator.

Why Buy Franklin Electric from Watermain Supply

Engineering-Led Selection

We size from your duty point, source and supply, read the Franklin curve, and send the submittal before you order.

Multi-Brand Honesty

We also supply Grundfos, Goulds, A.Y. McDonald, DAB and Davey. If a Franklin pump is not the right fit, we will say so and quote the one that is.

Account Terms Available

Net-30 for qualified contractor, property-management and municipal accounts.

Parts & Aftermarket

Pump ends, stacks, seal kits, overhaul kits and replacement motors by Franklin order number, for the life of the installation.

Whole System, One Order

Pump, motor, drive, control box, tank and fittings on one order, sized to work together.

Houston Based

Based in Houston and serving the Gulf Coast with the correct U.S. 60 Hz build for your voltage and phase.

Franklin Electric Pumps FAQ

The questions we answer most about Franklin Electric.

Who makes Franklin Electric pumps?

Franklin Electric Co., Inc., founded in 1944 in Bluffton, Indiana and now headquartered in Fort Wayne, Indiana. It is best known for the submersible motor and builds pumps, motors, drives and controls for water systems under the Franklin Electric, FPS, Little Giant and Pioneer Pump names.

Which Franklin Electric pump do I need?

Start from the job and the source. Wells and cisterns take a jet pump; ponds and lakes a Turf Boss or FBSE self-priming pump; low city pressure a BT4, MH or VR booster; steady home pressure a VersaBoost Pro or Inline Control; high-flow transfer an AG, HC or XS centrifugal; sewage an NC non-clog pump. Send the flow, head and supply and we match the model.

What is the difference between a jet pump and a booster pump?

A jet pump lifts water up to the surface from a well or cistern. A booster pump takes water that is already at the surface or under city pressure and raises the pressure for fixtures, irrigation or filtration. Draw from a well: jet pump. Have water but not enough pressure: booster.

What Franklin constant pressure options are there?

VersaBoost Pro is a complete system with the drive, check valve and tank built in, 18 or 25 GPM. Inline Controls add flow-activated start and protection to an existing pump up to 3 HP. For three-phase pumps, a Cerus X-Drive panel with a pressure transducer holds constant pressure, and SpecPAK packages do it for whole buildings.

Are Franklin pumps certified for drinking water?

Many are. The VR Series, VersaBoost Pro and SpecPAK packages list NSF/ANSI 61 and 372, and the Franklin jet pumps list NSF/ANSI/CAN 372. Each product page shows the certification for that model.

Can I get parts for my existing Franklin pump?

Yes. We list seal kits, overhaul kits, stages, injectors, pump ends, stacks and replacement motors by Franklin order number with the models they fit. Send the nameplate model and, for VR pumps, the date code, and we confirm the part before it ships.

What warranty comes with Franklin Electric pumps?

It depends on the family and is set out in each owner’s manual: for example 1 year from original purchase on convertible jet pumps and the VR Series, and 12 months from installation or 24 months from manufacture on end-suction, self-priming and engine centrifugals. We confirm the term for your item with the quote.

Franklin Electric or Grundfos, Goulds, A.Y. McDonald and DAB?

Each wins somewhere, and we supply all of them. Each Franklin collection page compares the Franklin line with the closest Grundfos, Goulds, A.Y. McDonald and DAB models we carry, with an honest verdict on where each is the better buy.

Does Franklin make pumps for sites without power?

Yes. Gas engine-driven pumps from 3.5 to 23 engine HP, XS pumps for a truck’s hydraulic motor, bare-shaft pumps for your own engine, and the Fhoton solar pump package.

What should I send for a quote?

The flow, head or pressure, the source (well depth to water, pond lift or inlet pressure), the liquid, and your voltage and phase. For a replacement, a photo of the pump and motor nameplates. Email sales@watermainsupply.com or call 1-888.510.4036.

Ready to Size a Franklin Electric Pump?

Send the flow, head, source and supply, or the nameplate of the pump you are replacing. We return the matched Franklin model and submittal — or tell you if another brand fits the job better.

Technical data on this page is taken from Franklin Electric U.S. 60 Hz product literature and is subject to change by the manufacturer. Confirm against the current installation manual and pump curve before specifying.
Franklin Electric, FPS, Little Giant, Pioneer Pump, VersaJet, Cyclone, Convertible Pro, Turf Boss, BT4, Tri-Seal, VersaBoost, Inline SpecPAK, VR SpecPAK, VR Series, Cerus, X-Drive, MagForce, FE Connect, Fhoton and SolarPAK are trademarks of Franklin Electric Co., Inc. Grundfos, Goulds, A.Y. McDonald, Baker, DAB, Davey, Pumptec, Briggs & Stratton, Honda, Kohler, Modbus and BACnet are trademarks of their respective owners. All are used here for product identification only.
Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial supplier based in Houston, Texas.