Menu
Your cart is empty
Looks like you haven't added anything to your cart yet
Submersible Well Pumps
DAB S4 15 GPM 4 in Submersible Well Pump - Multi-Impeller Stainless Borehole Pump, Tesla Motor
DAB
DAB S4 15 GPM 4 in Submersible Well Pump - Multi-Impeller Stainless Borehole Pump, Tesla Motor
- Price
- From $480
A.Y. McDonald Bottom Suction Cistern Submersible Pump
A.Y. McDonald
A.Y. McDonald Bottom Suction Cistern Submersible Pump
- Price
- From $658.09
Franklin Electric 4 in Tri-Seal Submersible Well Pump - 10-25 GPM, 1/2-1.5 HP
Franklin Electric
Franklin Electric 4 in Tri-Seal Submersible Well Pump - 10-25 GPM, 1/2-1.5 HP
- Price
- From $1,169.34
Franklin Electric 4 in 3200 Series Submersible Well Pump - 5-10 GPM, 1/2-1.5 HP
Franklin Electric
Franklin Electric 4 in 3200 Series Submersible Well Pump - 5-10 GPM, 1/2-1.5 HP
- Price
- From $1,187.34
DAB S4 25 GPM 4 in Submersible Well Pump - Multi-Impeller Stainless Borehole Pump, Tesla Motor
DAB
DAB S4 25 GPM 4 in Submersible Well Pump - Multi-Impeller Stainless Borehole Pump, Tesla Motor
- Price
- From $614.15
Grundfos 5S SP Submersible Well Pump
Grundfos
Grundfos 5S SP Submersible Well Pump
- Price
- From $1,339.75
Grundfos 22 SQE Submersible Well Pump
Grundfos
Grundfos 22 SQE Submersible Well Pump
- Price
- From $1,275.27
Grundfos 15 SQE Submersible Well Pump
Grundfos
Grundfos 15 SQE Submersible Well Pump
- Price
- From $1,292.81
Grundfos 10 SQ Submersible Well Pump
Grundfos
Grundfos 10 SQ Submersible Well Pump
- Price
- From $1,089.77
DAB Esybox Diver Submersible Pressure Pump - Variable Speed Constant Pressure, 1.3 HP, 31.7 GPM, 180 ft Head, 1-1/4 in NPT, Integrated Tank
DAB
DAB Esybox Diver Submersible Pressure Pump - Variable Speed Constant Pressure, 1.3 HP, 31.7 GPM, 180 ft Head, 1-1/4 in NPT, Integrated Tank
- Price
- $2,431
A.Y. McDonald 24000 Series P - 20 GPM 4 in Stainless Steel Submersible Pump
A.Y. McDonald
A.Y. McDonald 24000 Series P - 20 GPM 4 in Stainless Steel Submersible Pump
- Price
- From $1,006.45
Franklin Electric SubDrive QuickPAK Constant Pressure Well Pump Package
Franklin Electric
Franklin Electric SubDrive QuickPAK Constant Pressure Well Pump Package
- Price
- From $3,244.59
Submersible Well Pumps
Submersible Well Pumps · All BrandsSubmersible
Submersible
Well Pumps
Complete 3 in, 4 in and 6 in and larger submersible well pumps from A.Y. McDonald, DAB, Franklin Electric and Grundfos. Filter by brand above, or use the guide below to narrow by well size, flow and power.
4 BrandsOne collection
3 to 6 in+Well sizes
2-Wire · 3-WireAnd three-phase
ConstantPressure options
A submersible well pump sits below the water in the well casing and pushes water up the drop pipe. It is the pump for wells too deep for a jet pump, and it moves more water per horsepower because it never has to pull water by suction. Each pump is a pump end and a motor, sold assembled as one unit.
Watermain Supply supplies complete submersibles, pump ends, motors, control boxes and constant-pressure drives from four manufacturers. Every order can start with engineering-led sizing against the manufacturer's published curve: send your well depth, pumping level and the pressure you need, or call 1-888.510.4036. All products are genuine, factory-new equipment in original manufacturer packaging, sold and supported by Watermain Supply, an independent industrial supplier.
Submersible Pump CalculatorFlow class, HP and pressure tank for your well DAB Submersible CalculatorThe DAB S3, S4, DTron and Diver models that fit
Shop by Brand and Series
Each tile opens that manufacturer's full line, with its own sizing tables and data sheets.
A.Y. McDonald
4 in stainless steel pumps, 2-wire and 3-wireShop A.Y. McDonald
DAB
S3 and S4 pumps, DTron and Esybox DiverShop DAB
Franklin Electric
4 in residential and farm submersiblesShop Franklin Electric
Grundfos SQ and SQE
3 in pumps; SQE runs at constant pressureShop SQ and SQE
Grundfos 4 in SP
All-stainless 4 in pumpsShop 4 in SP
Grundfos SP and SPE 6 in+
High-capacity pumps for irrigation and commercial wellsShop 6 in and largerHow to Choose a Submersible Pump
Four questions narrow the collection to a handful of pumps. Answer them in this order.
1. Well Size
Measure the inside diameter of the casing. A 3 in pump (Grundfos SQ, DAB S3) fits a 3 in or larger casing, a 4 in pump fits a 4 in or larger casing, and 6 in and larger pumps carry the high flows of irrigation, municipal and commercial wells.
2. Flow and Head
Pick the flow class from peak demand. Then pick the HP from total head: pumping water level, plus the rise to the tank or house, plus pressure at 2.31 ft per PSI, plus pipe friction. The performance table on each pump shows the flow it delivers at that head.
3. Wiring and Power
A 2-wire pump has its start components in the motor and needs no control box. A 3-wire pump needs a control box above ground, matched to the motor HP. Three-phase pumps need a magnetic starter or a drive rated for the motor.
4. Constant Pressure
A drive-run system holds one set pressure as taps open and close, and works with a smaller pressure tank. Look at the Grundfos SQE and CUE 100 packages, the Franklin Electric SubDrive and MagForce QuickPAK packages, and the A.Y. McDonald AutoPAC and AutoDrive.
Quick rule. Size the pump to the pumping water level, not the static level: the water drops while the pump runs. If you do not know it, send us the well log and we will work from it.
Pump Ends, Motors and Controls
Repairing a pump or building one to order? These collections hold every brand's components.
Submersible Pump Ends
Bare pump ends by flow and HPAll brandsSubmersible Motors
2-wire, 3-wire and three-phase motorsAll brandsControl Boxes and Drives
3-wire control boxes, starter kits and drivesAll brandsConstant-Pressure Packages
SQE, CUE 100, QuickPAK, AutoPAC and AutoDriveAll brandsSolar Water Pumps
Off-grid submersibles and controllersAll brandsWell Supplies
Well caps, seals and pitless adaptersCampbell and MonitorWhy Buy Your Submersible from Watermain Supply
Engineering-Led Sizing
Send the duty and we check it against the manufacturer's published data before you order.
Multi-Brand Honesty
We sell several brands in every category. If one is not the right fit, we will say so and quote the one that is.
Account Terms Available
Net-30 for qualified contractor, property management and municipal accounts.
Parts and Aftermarket
Genuine repair parts and accessories, matched by model, so the job ships complete.
Frequently Asked Questions
Straight answers to the questions buyers ask us most.
When do I need a submersible pump instead of a jet pump?
A shallow well jet lifts water by suction and works to about 25 ft. A submersible sits below the water and pushes it up, so it handles deep wells, higher flows and long runs, and it uses less power for the same water.
What is the difference between a 2-wire and a 3-wire submersible?
A 2-wire motor carries its start components inside the motor, so it connects straight to a pressure switch. A 3-wire motor keeps them in a control box above ground, which must match the motor HP and voltage. Each product page says which one a pump needs.
How do I find the right HP?
Add the pumping water level, the rise from the well head to the tank, the pressure you want at 2.31 ft per PSI, and pipe friction. That total head and your peak flow pick the pump; the performance table on each listing shows it, and the calculator does the arithmetic.
Can I buy the pump end and motor separately?
Yes. Pump ends, motors and control boxes are listed in their own collections, for repairs and for builds the complete pumps do not cover. Each pump end page names the motor it needs.
What else do I need besides the pump?
Drop pipe, drop cable and a splice kit sized to your setting depth, a check valve, a pressure tank and a pressure switch or drive. The What Ships section on each product page lists what is included and what is ordered separately.
Can you size the pump for me?
Yes. Send the well depth, pumping level, casing size, the pressure you want and your power supply to sales@watermainsupply.com or call 1-888.510.4036. We check the duty against the manufacturer's curve before you order.
Ready to Size Your Well Pump?
Send the well depth, pumping level, casing size and the pressure you need. We will reply with a sized selection from the brands we carry.
Technical data on this page is taken from manufacturer product literature and is subject to change by the manufacturer. Confirm against the current installation manual before specifying.
A.Y. McDonald, DuraMAC, AutoPAC and AutoDrive are trademarks of A.Y. McDonald Mfg. Co.; DAB, DTron and Esybox Diver of DAB Pumps S.p.A.; Grundfos, SQ, SQE, SP, SPE and CUE of Grundfos Holding A/S; Franklin Electric, SubDrive, MonoDrive, MagForce and QuickPAK of Franklin Electric Co., Inc.; Campbell and Monitor are trademarks of their respective owners. All are used here for product identification only.
Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial supplier based in Houston, Texas.
A.Y. McDonald, DuraMAC, AutoPAC and AutoDrive are trademarks of A.Y. McDonald Mfg. Co.; DAB, DTron and Esybox Diver of DAB Pumps S.p.A.; Grundfos, SQ, SQE, SP, SPE and CUE of Grundfos Holding A/S; Franklin Electric, SubDrive, MonoDrive, MagForce and QuickPAK of Franklin Electric Co., Inc.; Campbell and Monitor are trademarks of their respective owners. All are used here for product identification only.
Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial supplier based in Houston, Texas.
- Choosing a selection results in a full page refresh.