Franklin Electric Series V 4 in submersible pumps

Franklin Electric Submersible Pumps, Pump Ends and Motors

The complete Franklin Electric groundwater line: 4 in submersible well pumps, pump ends from 4 in to 10 in, and 4 in, 6 in and 8 in motors with MagForce permanent-magnet systems to 300 HP. Buy a complete pump for a 4 in well up to 90 GPM. Buy a pump end and motor for larger wells or rebuilds. SubDrive, Pumptec and SubMonitor controls start and protect the motor. We supply every listing with engineering-led sizing on your duty point. Call 1-888.510.4036.

35 products
Sort by:
Best selling
Sort by:
Best selling
Franklin Electric SubMonitor Three-Phase Motor Protection
Franklin Electric SubMonitor Connect three-phase motor protection relay

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubMonitor Three-Phase Motor Protection

Price
From $73.85
Franklin Electric Pumptec Single-Phase Pump Protection
Franklin Electric Pumptec single-phase pump protection 5800020610

Franklin Electric

Free Shipping $499 or more

Franklin Electric Pumptec Single-Phase Pump Protection

Price
From $391.38
Franklin Electric 4 in Single-Phase 2-Wire Submersible Motor - 1/3-1.5 HP
Franklin Electric 4 in Super Stainless Motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Single-Phase 2-Wire Submersible Motor - 1/3-1.5 HP

Price
From $737.72
Franklin Electric SubDrive and MonoDrive Constant Pressure Controller
Franklin Electric SubDrive Connect NEMA 3R constant pressure drive

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubDrive and MonoDrive Constant Pressure Controller

Price
From $1,288.86
Franklin Electric MagForce QuickPAK Constant Pressure Well Pump Package
Franklin Electric SubDrive QuickPAK Packaged System with Carton View 2

Franklin Electric

Free Shipping $499 or more

Franklin Electric MagForce QuickPAK Constant Pressure Well Pump Package

Price
From $4,008.18
Franklin Electric 6 in Submersible Motor - 5-60 HP
Franklin Electric 6in-Encapsulated-Motor 5-60 HP

Franklin Electric

Free Shipping $499 or more

Franklin Electric 6 in Submersible Motor - 5-60 HP

Price
From $2,453.49
Franklin Electric 4 in Tri-Seal Submersible Well Pump
Franklin Electric Tri-Seal 4 in stainless steel submersible well pump

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Tri-Seal Submersible Well Pump

Price
From $1,169.34
Franklin Electric 4 in Series V Submersible Well Pump
Franklin Electric Series V 4 in submersible well pumps, stainless and thermoplastic

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Series V Submersible Well Pump

Price
From $1,100.34
Franklin Electric 4 in 3200 Series Submersible Well Pump
Franklin Electric 4 in stainless submersible pump, photo from the 3200 Series catalog page

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in 3200 Series Submersible Well Pump

Price
From $1,187.34
Franklin Electric SubDrive QuickPAK Replacement Pump End
Franklin Electric 4 in submersible pump end for SubDrive QuickPAK

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubDrive QuickPAK Replacement Pump End

Price
From $805.17
Franklin Electric SubDrive QuickPAK Constant Pressure Well Pump Package
Franklin Electric SubDrive QuickPAK Packaged System with Carton

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubDrive QuickPAK Constant Pressure Well Pump Package

Price
From $3,244.59
Franklin Electric MagForce Permanent Magnet Submersible Motor and Drive
Franklin Electric MagForce 6 in PM Motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric MagForce Permanent Magnet Submersible Motor and Drive

Price
From $1,081.22
Franklin Electric C1 Submersible Cistern Pump - 2-Wire, 1/2 HP, 10-30 GPM
Franklin Electric C1 Series submersible cistern pump

Franklin Electric

Free Shipping $499 or more

Franklin Electric C1 Submersible Cistern Pump - 2-Wire, 1/2 HP, 10-30 GPM

Price
From $1,131.47
Franklin Electric 9 in STS Submersible Turbine Pump End - Ductile Iron
Franklin Electric 600STS-1200STS 9 in STS Pump End

Franklin Electric

Free Shipping $499 or more

Franklin Electric 9 in STS Submersible Turbine Pump End - Ductile Iron

Price
From $5,585.13
Franklin Electric 8 in Submersible Motor - 40-200 HP
Franklin Electric 8in-Encapsulated-Motor 40-200 HP

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in Submersible Motor - 40-200 HP

Price
From $8,878.38
Franklin Electric 8 in STS Submersible Turbine Pump End - Ductile Iron
Franklin Electric 225STS-1000STS 8 in STS Pump End and Cutaway

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in STS Submersible Turbine Pump End - Ductile Iron

Price
From $4,110.99
Franklin Electric 8 in SSI Submersible Pump End - Stainless Steel
Franklin Electric SSI Series Stainless Submersible Pump End View 2

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in SSI Submersible Pump End - Stainless Steel

Price
From $6,296.34
Franklin Electric 8 in SR Submersible Pump End - Stainless Steel
Franklin Electric 400SR-475SR 8 in SR Series Stainless Pump Ends

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in SR Submersible Pump End - Stainless Steel

Price
From $5,646.93

Franklin Electric Submersible Pumps, Pump Ends and Motors

Franklin Electric · Groundwater

Franklin Electric Submersible Pumps, Pump Ends and Motors

The full Franklin submersible line in one place: complete 4 in pumps, pump ends from 4 in to 10 in, motors to 300 HP, and the controls that start and protect them.

Franklin Electric Series V submersible pump family
35Listings
5–1,200GPM
1/3–300HP
4–10 inWells
2,364 ftMax Head

Franklin Electric’s groundwater line covers the whole well: complete 4 in pumps and constant pressure packages for homes and farms, SR, SSI and STS pump ends for irrigation and municipal wells, 4 in to 8 in motors and MagForce permanent-magnet systems, plus SubDrive, Pumptec and SubMonitor controls.

We supply every listing here, and we size the set together — pump end, motor, control and cable — with engineering-led sizing on your duty point. Call 1-888.510.4036 or email sales@watermainsupply.com. Genuine Franklin Electric equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.

Will It Work for Me?

What decides a submersible order.

Warranty

4 in complete pumps: 1 year from original purchase. Motors, QuickPAKs and controls: 12 months from installation, no more than 24 months from manufacture; motors extend to 3 years with Franklin overload controls. SR, SSI, STS: 1 year from installation or 2 from manufacture.

Reliability

Stainless motors with sealed windings or StatorShield encapsulation; Tri-Seal floating stages and STS ductile iron turbines for sandy water; every STS factory wet tested. Pumptec and SubMonitor shut the motor down before a fault does damage.

Fit

Casing size first: 4 in pumps for 4 in wells, SR and SSI from 6 in, STS from 5 in. Single-phase to 5 HP or 15 HP on 6 in motors; three-phase to 300 HP. Clean potable water is the warranty condition; 316 SS SR is built for corrosive water.

Size It Now

Get flow and total dynamic head in two minutes, or send the well log to 1-888.510.4036.

Submersible Calculator

Shop by Part

Each group has its own page with a full comparison and selection guide.

Franklin complete 4 in submersible well pump

Complete Well Pumps

9 families · pump and motor assembled

5–90GPM
1/2–5HP
4 inWells
QuickPAKConstant Pressure

3200 Series, Series V, Tri-Seal and High Capacity 4 in pumps, SubDrive and MagForce QuickPAK packages, E-Series effluent and the C1 cistern pump.

  • Assembled on a Franklin stainless motor
  • 2-wire builds need no control box
  • QuickPAK holds pressure, factory set 50 PSI
Best for Homes, farms and light commercial wells.
Shop Well Pumps
Franklin STS submersible turbine pump end

Pump Ends

17 families · 4 in to 10 in

5–1,200GPM
1/2–250HP
2,364 ftMax Head
SS or DIBuilds

4 in residential and high-capacity hydraulics, SR and SSI stainless pump ends for 6–10 in wells, and STS ductile iron submersible turbines.

  • SR and SSI with built-in check valve
  • 316 SS SR for corrosive water
  • STS wet tested, results shipped
Best for Rebuilds, irrigation and municipal wells.
Shop Pump Ends
Franklin 6 in submersible motor

Submersible Motors

6 families · 4 in, 6 in, 8 in, MagForce

1/3–300HP
1Ph/3PhSupply
UL 7784 in Motors
90%MagForce

4 in 2-wire, 3-wire and three-phase motors, 6 in and 8 in motors with Kingsbury-type thrust bearings, and MagForce permanent-magnet motor and drive systems.

  • Sand Fighter and High-Temp 6 in builds
  • MagForce runs from a Franklin drive
  • Franklin leads required for warranty
Best for Pairing with any Franklin pump end.
Shop Motors

Complete Pump or Pump End and Motor?

Buy a Complete Pump

  • 4 in well, 5–90 GPM, up to 5 HP
  • New residential or farm well
  • One part number, factory assembled
  • Constant pressure wanted: QuickPAK

Buy a Pump End and Motor

  • Above 90 GPM or 6 in and larger casing
  • Replacing one failed half of an existing pump
  • Three-phase motor with starter or drive
  • Special build: 316 SS, Sand Fighter, High-Temp
Quick rule: Under 90 GPM in a 4 in well, buy the complete pump. Bigger than that, or rebuilding, buy the pump end and motor of the same HP and diameter, plus the control.

Franklin vs A.Y. McDonald vs Grundfos vs DAB — the Submersible Lines

Line-level comparison from the listings on this site.

Spec Franklin Electric A.Y. McDonald / Baker Grundfos DAB
Complete 4 in pumps 5–90 GPM incl. QuickPAK 5–80 GPM in brass, thermoplastic and stainless SP 5–77 GPM; SQ and SQE in 3 in wells S4 5–25 GPM; S3 3 in
Pump ends 4–10 in, to 1,200 GPM, SS and ductile iron 4–10 in, to 1,100 GPM 4–10 in SP, to 1,100 GPM; SPE variable speed S4 4 in
Motors 4, 6, 8 in; MagForce to 300 HP 4, 6, 7, 8, 10 in Baker No separate motor listings on our site Tesla 4 in and 6 in
Constant pressure SubDrive and MagForce QuickPAK Baker AutoDrive SQE Esybox Diver
Warranty, 4 in pumps 1 year from purchase 5 years from manufacture, potable water See listing See listing
Shop This page A.Y. 24000 Series Grundfos 16S SP DAB S4

Verdict: A.Y. McDonald wins on warranty — 5 years from manufacture on 4 in pumps to 25 GPM in potable water — and on motor sizes to 10 in. Grundfos SQ and SQE win in 3 in wells, and the SP and SPE pump ends carry a 24-month-from-installation warranty. Franklin wins on breadth: ductile iron STS turbines to 1,200 GPM, permanent-magnet motors to 300 HP, and motor protection and drives from the same maker as the motor.

Why Buy From Watermain Supply

Engineering-led sizing

Send the well depth, pumping level, flow and pressure. We work the total dynamic head and match pump end, motor, control and cable size before you order.

Straight answers across brands

We also supply A.Y. McDonald, Grundfos and DAB submersibles. If Franklin is not the right fit for the well, we will say so and show you what is.

Account terms

Contractor, well driller and municipal accounts on approved credit. Ask us to set one up.

Parts and aftermarket

Motor leads, couplings, check valves, pump and motor repair parts and drive accessories are listed alongside the pumps.

Whole well in one order

Pump end, motor, control, protection, leads and check valves on one order and one invoice.

Houston based, Gulf Coast service

We size, quote and support from Houston for drillers, contractors and utilities.

Frequently Asked Questions

What warranty does Franklin give on submersible pumps and motors?

4 in complete pumps: 1 year from original purchase. Motors, QuickPAKs and controls: 12 months from installation, no more than 24 months from manufacture, with motors extendable to 3 years on Franklin overload-protection controls. SR, SSI and STS pump ends: 1 year from installation or 2 years from manufacture in clean potable water.

Should I buy a complete pump or a pump end and motor?

A complete pump for a 4 in well up to 90 GPM. A pump end and motor for larger wells, three-phase jobs, special builds, or to replace one failed half.

Does the motor have to be Franklin?

Franklin pump ends are listed with a Franklin motor of the same horsepower. Franklin motors use NEMA standard mounting for their diameter; we confirm fit before shipping.

What controls does a submersible need?

2-wire motors need none. 3-wire single-phase motors need a control box. Three-phase motors need a starter or drive, and SubMonitor adds protection. SubDrive converts a well to constant pressure.

How do I size the pump?

Work out flow and total dynamic head — pumping level, lift to the tank, pressure × 2.31 and friction — then pick the build whose rated head at your flow clears it. The Submersible Calculator does the math.

Do you have Franklin solar pumps?

Yes, on the Franklin Electric Solar Water Pumps page: SubDrive, Fhoton and Fhoton Helical Rotor SolarPAKs with panels and controllers.

Ready to Size Your Well?

Send the well log, flow and pressure you need. We will match the pump end, motor, control and cable.

Technical data on this page is taken from Franklin Electric product literature and is subject to change by the manufacturer. Confirm against the current installation manual before specifying.

Franklin Electric, SubDrive, MonoDrive, QuickPAK, SolarPAK, Fhoton, MagForce, Tri-Seal, Pumptec and SubMonitor are trademarks of Franklin Electric Co., Inc. Grundfos, SP, SPE, SQ and SQE are trademarks of Grundfos Holding A/S. A.Y. McDonald, Baker and AutoDrive are trademarks of A.Y. McDonald Mfg. Co. DAB, Tesla and Esybox are trademarks of DAB Pumps S.p.A. used here for product identification only.

Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial supplier based in Houston, Texas.