Franklin Electric 4 in submersible motor, the motor family these kits fit

Franklin Electric Submersible Motors

Franklin Electric submersible motors: 4 in 2-wire, 3-wire and three-phase from 1/3 to 10 HP, 6 in and 8 in motors to 200 HP, and MagForce permanent-magnet motor and drive systems to 300 HP. The motor follows the pump end: same HP, same NEMA diameter. Franklin states the warranty extends to 3 years with Franklin overload-protection controls. We supply the motor with its control box, starter or drive. Call 1-888.510.4036

6 products
Sort by:
Best selling
Sort by:
Best selling
Franklin Electric 4 in Single-Phase 2-Wire Submersible Motor - 1/3-1.5 HP
Franklin Electric 4 in Super Stainless Motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Single-Phase 2-Wire Submersible Motor - 1/3-1.5 HP

Price
From $737.72
Franklin Electric 6 in Submersible Motor - 5-60 HP
Franklin Electric 6in-Encapsulated-Motor 5-60 HP

Franklin Electric

Free Shipping $499 or more

Franklin Electric 6 in Submersible Motor - 5-60 HP

Price
From $2,453.49
Franklin Electric MagForce Permanent Magnet Submersible Motor and Drive
Franklin Electric MagForce 6 in PM Motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric MagForce Permanent Magnet Submersible Motor and Drive

Price
From $1,081.22
Franklin Electric 8 in Submersible Motor - 40-200 HP
Franklin Electric 8in-Encapsulated-Motor 40-200 HP

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in Submersible Motor - 40-200 HP

Price
From $8,878.38
Franklin Electric 4 in Three-Phase Submersible Motor - 1/2-10 HP, 200-575V
Franklin Electric 4 in Super Stainless Motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Three-Phase Submersible Motor - 1/2-10 HP, 200-575V

Price
From $668.72
Franklin Electric 4 in Single-Phase 3-Wire Submersible Motor - 1/3-5 HP
Franklin Electric 4 in Super Stainless Motor

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Single-Phase 3-Wire Submersible Motor - 1/3-5 HP

Price
From $637.22

Franklin Electric Submersible Motors

Franklin Electric · Submersible Motors

Franklin Electric Submersible Motors

4 in, 6 in and 8 in water well motors and MagForce permanent-magnet systems — single-phase and three-phase, 1/3 to 300 HP.

Franklin Electric 6 in submersible motor
6Motor Families
1/3–300HP
4, 6, 8 inDiameters
115–575 V1Ph and 3Ph
90%MagForce Efficiency

These are Franklin Electric’s water well motors: 4 in single-phase 2-wire and 3-wire, 4 in three-phase, 6 in and 8 in motors for larger wells, and the MagForce permanent-magnet motor and drive system. Each listing gives the build, voltage, lead and thrust rating per order number.

We supply the motor with the control it needs — control box, starter or drive — and check HP, diameter and thrust against the pump end before it ships. Call 1-888.510.4036 or email sales@watermainsupply.com. Genuine Franklin Electric equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.

Will It Work for Me?

What decides a motor order.

Warranty

12 months from installation, no more than 24 months from manufacture. Franklin states it can be extended to 3 years with Franklin overload-protection controls, and is void if non-Franklin leads are used.

Reliability

Stainless steel shells and splined shafts. 4 in motors have hermetically sealed windings; 6 in and 8 in use StatorShield encapsulation and a Kingsbury-type water-lubricated thrust bearing, factory filled with a non-toxic fill solution.

Fit

Match HP and NEMA diameter to the pump end. Standard motors are rated to 86 °F water; the 6 in High-Temp runs to 195 °F and the 8 in Hi-Temp 75 to 167 °F. MagForce runs only from a Franklin drive.

Size It Now

Work out flow and head first, then the motor follows the pump end. Or call 1-888.510.4036.

Submersible Calculator

Three Ways to Power a Well

Franklin 4 in submersible motor

4 in Motors

2-wire, 3-wire and three-phase · homes, farms, light commercial

1/3–10HP
115–575 V1Ph and 3Ph
UL 778Recognized
NSF 61ANSI/NSF

Three 4 in families: 2-wire to 1.5 HP with the start components inside, 3-wire single-phase to 5 HP with a Franklin control box, and three-phase to 10 HP, 200–575 V.

  • Hermetically sealed windings, StatorShield resin
  • Stainless splined shaft, filter check valve
  • 125 three-phase builds, 1/2–10 HP
Best for Residential, farm and three-phase 4 in wells.
View 3-Phase Motors
Franklin 6 in submersible motor

6 in and 8 in Motors

5–200 HP · irrigation, municipal, industrial

5–200HP
200–575 V3Ph
VFDCompatible
Sand FighterOption

Double-flanged NEMA motors with a high-capacity Kingsbury-type thrust bearing. The 6 in line adds single-phase builds to 15 HP, Sand Fighter and 90 °C High-Temp versions.

  • DOL 3-lead or Y-Delta 6-lead builds
  • Factory filled, non-toxic fill solution
  • 8 in Hi-Temp 75 build to 167 °F water
Best for Pump ends from 6 in SR to 9 in STS.
View 6 in Motors
Franklin MagForce permanent-magnet submersible motor

MagForce Permanent Magnet

Motor and drive · 1.5–300 HP

1.5–300HP
90%Efficiency
230–575 V3Ph
DriveRequired

A permanent-magnet motor Franklin rates at 90% efficiency, 10–12% above standard induction construction, paired with a Franklin drive for startup and protection.

  • Runs from SubDrive Connect Plus or Cerus X-Drive
  • System builds include the drive
  • Franklin cites a typical payback of 1 to 2 years
Best for High-duty wells where energy cost drives the choice.
View MagForce

Compare All 6 Franklin Motor Families

Motor Diameter HP Supply Control Needed Builds
4 in 2-Wire 4 in 1/3–1.5 115–230 V 1Ph None — controls in the motor 18
4 in 3-Wire 4 in 1/3–5 115–230 V 1Ph Franklin 3-wire control box 39
4 in Three-Phase 4 in 1/2–10 200–575 V 3Ph Starter or drive 125
6 in 6 in 5–60 1Ph to 15 HP; 200–575 V 3Ph Control box (1Ph); starter or drive (3Ph) 98
8 in 8 in 40–200 380–575 V 3Ph Starter or drive 47
MagForce Per build 1.5–300 230–575 V 3Ph Franklin drive only 21
Quick rule: The motor follows the pump end: same HP, same NEMA diameter, and enough thrust for the pump. Single-phase service up to 1.5 HP: 2-wire is simplest. Up to 5 HP: 3-wire with a control box. Three-phase service or above 5 HP: three-phase motor with a starter or drive.

Franklin vs A.Y. McDonald vs DAB — 4 in Motors

The closest equivalents we list, from each product page on this site.

Spec Franklin 4 in 3-Wire A.Y. McDonald Baker 4 in DAB Tesla 4GG 3-Wire
HP 1/3–5 (1Ph) 1/2–10 (2-wire, 3-wire, 3Ph) 0.5–5 1Ph; 0.5–10 3Ph
Construction Stainless, hermetically sealed windings Stainless, IP68, Class F insulation AISI 304 stainless, water-glycol fill
Certifications UL 778 Recognized, CSA, ANSI/NSF 61 CSA NSF/ANSI 61 and 372, UL, CSA
Water temperature 86 °F 95 °F See listing
Warranty 12 months installation / 24 months manufacture; 3 years with Franklin overload controls 3 years from manufacture See listing
Product page Franklin 4 in 3-Wire Baker 4 in DAB Tesla 4GG

Verdict: A.Y. McDonald wins on standard warranty — 3 years from manufacture without extra controls — and on water temperature rating. DAB matches Franklin’s certification set. Franklin wins on the system: the motor, control box, Pumptec and SubMonitor protection, SubDrive and MagForce drives all from one maker, with the warranty extendable to 3 years when Franklin overload controls are used.

Selection Guide

Job Recommended Motor Control
Home well, 1/2–1.5 HP, single-phase 4 in 2-Wire None
Home or farm well, to 5 HP, single-phase 4 in 3-Wire 3-wire control box
Three-phase service, 4 in well 4 in Three-Phase Starter, or SubDrive
Irrigation or municipal, 5–60 HP 6 in Starter or drive; SubMonitor protection
Large municipal, 40–200 HP 8 in Starter or drive
High run hours, energy-led spec MagForce Franklin drive, included on System builds

Leads, Couplings and Parts

Franklin voids the motor warranty if non-Franklin leads are used.

Why Buy From Watermain Supply

Engineering-led sizing

Send the well depth, pumping level, flow and pressure. We work the total dynamic head and match pump end, motor, control and cable size before you order.

Straight answers across brands

We also supply A.Y. McDonald, Grundfos and DAB submersibles. If Franklin is not the right fit for the well, we will say so and show you what is.

Account terms

Contractor, well driller and municipal accounts on approved credit. Ask us to set one up.

Parts and aftermarket

Motor leads, couplings, check valves, pump and motor repair parts and drive accessories are listed alongside the pumps.

Motor and control as one set

We match the motor to its control box, starter or drive and its protection, so it starts and stays protected on day one.

Houston based, Gulf Coast service

We size, quote and support from Houston for drillers, contractors and utilities.

Frequently Asked Questions

What warranty comes with a Franklin submersible motor?

12 months from installation, no more than 24 months from manufacture. Franklin states it can be extended to 3 years with Franklin overload-protection controls, and it is void if non-Franklin leads are used.

Does a 2-wire motor need a control box?

No. A 2-wire motor carries its start components inside the motor. 3-wire single-phase motors need a Franklin control box matched to the HP.

Can I run a three-phase motor on single-phase power?

Yes, through a drive. Franklin SubDrive drives run on single-phase service and power a three-phase motor, which is how the QuickPAK constant pressure packages work.

Can a Franklin motor run on a VFD?

The 6 in and 8 in motors are listed as VFD compatible. MagForce motors run only from a Franklin drive programmed for the permanent-magnet motor.

What water temperature can the motor handle?

Standard motors are rated for continuous duty to 86 °F with the required flow past the motor. The 6 in High-Temp build runs to 195 °F (90 °C) and the 8 in Hi-Temp 75 to 167 °F.

Will a Franklin motor fit another brand’s pump end?

Franklin motors use the NEMA standard mounting for their diameter. Match HP, diameter, thrust and shaft, and check the pump maker’s motor fit; we confirm it before shipping.

Need the Right Motor for Your Pump End?

Send the pump end model, HP and power supply. We will match the motor, lead and control.

Technical data on this page is taken from Franklin Electric product literature and is subject to change by the manufacturer. Confirm against the current installation manual before specifying.

Franklin Electric, SubDrive, MonoDrive, QuickPAK, SolarPAK, Fhoton, MagForce, Tri-Seal, Pumptec and SubMonitor are trademarks of Franklin Electric Co., Inc. A.Y. McDonald and Baker are trademarks of A.Y. McDonald Mfg. Co. DAB and Tesla are trademarks of DAB Pumps S.p.A. used here for product identification only.

Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial supplier based in Houston, Texas.