Franklin Electric Tri-Seal High Capacity submersible pump end, 6 in model shown

Franklin Electric Submersible Pump Ends

Franklin Electric submersible pump ends from 4 in to 10 in, 5–1,200 GPM and 1/2–250 HP, each paired with a Franklin motor of the same horsepower. Tri-Seal and High Capacity serve 4 in wells. SR and SSI are stainless steel with a built-in check valve. STS are ductile iron turbines for abrasive water and high flows, and every one is factory wet tested. We match pump end, motor and control to your duty point. Call 1-888.510.4036.

17 products
Sort by:
Best selling
Sort by:
Best selling
Franklin Electric SubDrive QuickPAK Replacement Pump End
Franklin Electric 4 in submersible pump end for SubDrive QuickPAK

Franklin Electric

Free Shipping $499 or more

Franklin Electric SubDrive QuickPAK Replacement Pump End

Price
From $805.17
Franklin Electric 9 in STS Submersible Turbine Pump End - Ductile Iron
Franklin Electric 600STS-1200STS 9 in STS Pump End

Franklin Electric

Free Shipping $499 or more

Franklin Electric 9 in STS Submersible Turbine Pump End - Ductile Iron

Price
From $5,585.13
Franklin Electric 8 in STS Submersible Turbine Pump End - Ductile Iron
Franklin Electric 225STS-1000STS 8 in STS Pump End and Cutaway

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in STS Submersible Turbine Pump End - Ductile Iron

Price
From $4,110.99
Franklin Electric 8 in SSI Submersible Pump End - Stainless Steel
Franklin Electric SSI Series Stainless Submersible Pump End View 2

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in SSI Submersible Pump End - Stainless Steel

Price
From $6,296.34
Franklin Electric 8 in SR Submersible Pump End - Stainless Steel
Franklin Electric 400SR-475SR 8 in SR Series Stainless Pump Ends

Franklin Electric

Free Shipping $499 or more

Franklin Electric 8 in SR Submersible Pump End - Stainless Steel

Price
From $5,646.93
Franklin Electric 6 in STS Submersible Turbine Pump End - Ductile Iron
Franklin Electric 100STS-500STS 6 in STS Pump End and Cutaway

Franklin Electric

Free Shipping $499 or more

Franklin Electric 6 in STS Submersible Turbine Pump End - Ductile Iron

Price
From $2,770.59
Franklin Electric 6 in SSI Submersible Pump End - Stainless Steel
Franklin Electric SSI Series Stainless Submersible Pump End

Franklin Electric

Free Shipping $499 or more

Franklin Electric 6 in SSI Submersible Pump End - Stainless Steel

Price
From $2,182.97
Franklin Electric 6 in SR Submersible Pump End - Stainless Steel, 70-325 GPM, 5-75 HP
Franklin Electric 70SR-325SR 6 in SR Series Stainless Pump Ends

Franklin Electric

Free Shipping $499 or more

Franklin Electric 6 in SR Submersible Pump End - Stainless Steel, 70-325 GPM, 5-75 HP

Price
From $2,196.09
Franklin Electric 6 in High Capacity Submersible Pump End - Stainless Steel, 50-125 GPM, 1.5-40 HP
Franklin Electric 50FH-125FH 6 in Tri Seal High Capacity Pump End

Franklin Electric

Free Shipping $499 or more

Franklin Electric 6 in High Capacity Submersible Pump End - Stainless Steel, 50-125 GPM, 1.5-40 HP

Price
From $1,868.34
Franklin Electric 5 in STS Submersible Turbine Pump End - Ductile Iron
Franklin Electric 90STS-270STS 5 in STS Pump End and Cutaway

Franklin Electric

Free Shipping $499 or more

Franklin Electric 5 in STS Submersible Turbine Pump End - Ductile Iron

Price
From $2,253.84
Franklin Electric 4 in Tri-Seal Submersible Pump End - Stainless Steel, 10-25 GPM
Franklin Electric Tri-Seal stainless steel submersible pump end (6 in High Capacity shown)

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Tri-Seal Submersible Pump End - Stainless Steel, 10-25 GPM

Price
From $645.47
Franklin Electric 4 in Series V Submersible Pump End - Stainless Steel, 5-25 GPM
Franklin Electric Series V 4 in stainless steel submersible pump end

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in Series V Submersible Pump End - Stainless Steel, 5-25 GPM

Price
From $645.47
Franklin Electric 4 in High Capacity Submersible Pump End - Stainless Steel, 35-90 GPM
Franklin Electric Tri-Seal High Capacity submersible pump end, 6 in model shown

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in High Capacity Submersible Pump End - Stainless Steel, 35-90 GPM

Price
From $1,193.72
Franklin Electric 4 in E-Series Environmental Submersible Pump End - 10-90 GPM
Franklin Electric E-Series 4 in submersible pump end

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in E-Series Environmental Submersible Pump End - 10-90 GPM

Price
From $427.50
Franklin Electric 4 in 3200 Series Submersible Pump End - Stainless Steel, 5-10 GPM
Franklin Electric 4 in stainless submersible pump, photo from the 3200 Series catalog page

Franklin Electric

Free Shipping $499 or more

Franklin Electric 4 in 3200 Series Submersible Pump End - Stainless Steel, 5-10 GPM

Price
From $655.97
Franklin Electric 316 SS SR Submersible Pump End - 6 in and 8 in
Franklin Electric SR Series 6 in 8 in Submersible Pump Ends

Franklin Electric

Free Shipping $499 or more

Franklin Electric 316 SS SR Submersible Pump End - 6 in and 8 in

Price
From $2,442.84
Franklin Electric 10 in SSI Submersible Pump End - Stainless Steel
Franklin Electric SSI Series Stainless Submersible Pump End

Franklin Electric

Free Shipping $499 or more

Franklin Electric 10 in SSI Submersible Pump End - Stainless Steel

Price
From $7,428.09

Franklin Electric Submersible Pump Ends

Franklin Electric Β· Pump Ends

Franklin Electric Submersible Pump Ends

Bare submersible pump ends from 4 in residential hydraulics to 10 in stainless and 9 in ductile iron turbines β€” matched to a Franklin motor of the same horsepower.

Franklin Electric STS submersible turbine pump end and cutaway
17Pump End Families
5–1,200GPM
1/2–250HP
2,364 ftMax Head
4–10 inSizes

A pump end is the hydraulic half of a submersible: bowls, impellers and discharge, with no motor. Franklin builds them in three groups β€” 4 in residential and high-capacity hydraulics, SR and SSI stainless steel pump ends for 6 in to 10 in wells, and STS ductile iron submersible turbines for high flows and abrasive water.

We supply every pump end here, matched to the motor, starter or drive and cable it needs, with engineering-led sizing on the duty point. Call 1-888.510.4036 or email sales@watermainsupply.com. Genuine Franklin Electric equipment, factory-new in original packaging β€” sold and supported by Watermain Supply, an independent industrial supplier.

Will It Work for Me?

What decides a pump end order.

Warranty

SR, SSI and STS: 1 year from installation or 2 years from manufacture, whichever comes first, in clean potable water. 4 in and 6 in High Capacity pump ends: 1 year from original purchase.

Reliability

SR: stainless shell for permanent alignment, PTFE floating wear ring, ceramic bearing journal. STS: ductile iron bowls, investment cast stainless impellers, factory wet tested with results shipped. Tri-Seal: floating stages for sandy water.

Fit

Motor HP and NEMA diameter must match the build. SR and SSI carry a built-in check valve; STS needs one ordered separately. Saltwater and corrosive liquids sit outside Franklin’s warranty β€” the 316 SS SR is built for corrosive water.

Size It Now

Get flow and total dynamic head first, or send the well log to 1-888.510.4036.

Submersible Calculator

Three Pump End Groups

Franklin Electric 4 in stainless steel submersible pump end

4 in Residential and High Capacity

3200, Series V, Tri-Seal, High Capacity, E-Series

5–90GPM
1/2–10HP
1,950 ftMax Head
4 inMotor Fit

The same hydraulics Franklin assembles into its complete 4 in pumps, sold bare to rebuild a pump or pair with a motor already in the well.

  • Tri-Seal floating stages to 10 HP
  • High Capacity to 90 GPM, check valve optional
  • UL 778, CSA 108, NSF/ANSI 61 on 3200, Series V and Tri-Seal
Best for Rebuilds and well drillers building to order.
View Tri-Seal Pump Ends
Franklin SR stainless steel submersible pump end

SR and SSI Stainless Steel

6 in, 8 in and 10 in Β· 70–1,150 GPM

70–1,150GPM
5–250HP
2,364 ftMax Head
304/316Stainless

SR uses stainless impellers and diffusers inside a stainless shell; SSI uses die-cut stainless stages with Franklin’s patented I-Type blade assembly. Both carry a built-in check valve.

  • SR in 304 SS standard, 316 SS for corrosive water
  • SR suited to horizontal operation
  • SSI four-strap design spreads compression loads
Best for Municipal, irrigation and industrial wells.
View 6 in SR
Franklin STS submersible turbine pump end

STS Submersible Turbines

5, 6, 8 and 9 in Β· ductile iron

90–1,200GPM
3–200HP
2,338 ftMax Head
100%Wet Tested

Premium ductile iron bowls with investment cast stainless impellers and spiral cutlass rubber bearings, built for wells with abrasive water and high flows.

  • Every pump factory wet tested; results ship with it
  • Longer discharge and motor bracket bearings
  • Check valve ordered separately
Best for High-flow irrigation and abrasive wells.
View 6 in STS

Compare All 17 Franklin Pump Ends

Ranges as published on each listing.

Pump End Size Flow HP Max Head Build Motor Fit
3200 Series 4 in 5–10 GPM 1/2–3 1,237 ft Stainless 4 in
Series V 4 in 5–25 GPM 1/2–5 1,620 ft Stainless 4 in
Tri-Seal 4 in 10–25 GPM 1/2–10 1,950 ft Stainless, floating stages 4 in
4 in High Capacity 4 in 35–90 GPM 1–10 1,250 ft Stainless 4 in
4 in E-Series 4 in 10–90 GPM 1/2–3 452 ft Thermoplastic / stainless 4 in
QuickPAK Replacement 4 in 7–25 GPM 1/2–2 Per package 3200 / Tri-Seal hydraulics QuickPAK motor
6 in High Capacity 6 in 50–125 GPM 2–40 1,390 ft Stainless 4 in or 6 in
6 in SSI 6 in 85–300 GPM 5–60 1,529 ft 304 SS 4 in or 6 in
6 in SR 6 in 70–325 GPM 5–75 2,364 ft 304 SS 6 in or 8 in
316 SS SR 6 and 8 in 70–475 GPM 5–150 2,312 ft 316 SS 6 in or 8 in
8 in SR 8 in 400–475 GPM 15–150 1,663 ft 304 SS 6 in or 8 in
8 in SSI 8 in 425–475 GPM 25–125 1,156 ft 304 SS 6 in or 8 in
10 in SSI 10 in 550–1,150 GPM 40–250 1,062 ft 304 SS 6, 8 or 10 in
5 in STS 5 in 90–270 GPM 3–60 2,286 ft Ductile iron 4 in or 6 in
6 in STS 6 in 100–500 GPM 5–60 1,528 ft Ductile iron 6 in
8 in STS 8 in 225–1,000 GPM 5–125 2,338 ft Ductile iron 6 in or 8 in
9 in STS 9 in 600–1,200 GPM 25–200 1,438 ft Ductile iron 6 in or 8 in
Quick rule: Start from the casing: the pump end and motor must pass the well’s inside diameter with room for the cable guard. Then pick the flow class at its best-efficiency rating, not its maximum. Clean water: SR or SSI. Sand or high flows: STS. Corrosive water: 316 SS SR.

Franklin vs Grundfos vs A.Y. McDonald β€” 6 in, 150 GPM Class

The closest equivalents we list, from each product page on this site.

Spec Franklin 6 in SR Grundfos 160S SP 6 in A.Y. McDonald 150S 6 in
Flow 70–325 GPM family 160 GPM class 150 GPM rated
HP 5–75 2–75 5–50
Head (as published) 2,364 ft max 39–1,584 ft nominal 1,500 ft shut-off
Material 304 SS, 316 SS available AISI 304 SS 304 SS, 431 SS shaft
Check valve Built in Built in Built in
Motor fit 6 or 8 in; 4 in with adaptor kit to 10 HP 4, 6 and 8 in, Grundfos motor flange NEMA 4 and 6 in Baker motors
Warranty 1 yr installation / 2 yr manufacture 24 months installation / 30 months manufacture 1 yr installation / 2 yr manufacture
Product page Franklin 6 in SR Grundfos 160S SP A.Y. 150S

Verdict: Grundfos wins on warranty, 24 months from installation, and reaches down to 2 HP; check the motor flange when pairing it. A.Y. McDonald matches Franklin’s warranty terms on a Baker NEMA motor. Franklin wins on reach β€” the highest published head here, 316 stainless for corrosive water, and ductile iron STS turbines for sandy wells, a build neither of the others offers on our site.

Selection Guide

Application Flow Recommended Notes
Replace a failed 4 in pump end 5–25 GPM Tri-Seal or Series V Match the existing motor HP
Irrigation or livestock, 4 in well 35–90 GPM 4 in High Capacity Check valve built-in option
Small municipal or ranch well 70–325 GPM 6 in SR SSI for an efficiency-led spec
Sandy or abrasive well 90–1,200 GPM STS: 5 in, 6 in, 8 in, 9 in Order the check valve separately
Corrosive water 70–475 GPM 316 SS SR Confirm the water analysis
Large municipal supply 550–1,150 GPM 10 in SSI 10 in motors to order on request

Motors and Parts

Every pump end here needs a motor of the same horsepower and diameter.

Why Buy From Watermain Supply

Engineering-led sizing

Send the well depth, pumping level, flow and pressure. We work the total dynamic head and match pump end, motor, control and cable size before you order.

Straight answers across brands

We also supply A.Y. McDonald, Grundfos and DAB submersibles. If Franklin is not the right fit for the well, we will say so and show you what is.

Account terms

Contractor, well driller and municipal accounts on approved credit. Ask us to set one up.

Parts and aftermarket

Motor leads, couplings, check valves, pump and motor repair parts and drive accessories are listed alongside the pumps.

Pump end, motor and control matched

We check HP, diameter, thrust and the starter or drive together, so the pieces arrive as one working set.

Houston based, Gulf Coast service

We size, quote and support from Houston for drillers, contractors and utilities.

Frequently Asked Questions

What is the difference between a pump end and a complete pump?

A pump end is the hydraulic section only. A complete pump is the pump end factory-assembled on a motor. Pump ends suit rebuilds and larger wells where the motor and control are specified separately.

What warranty comes with Franklin SR, SSI and STS pump ends?

Franklin warrants them for 1 year from installation or 2 years from manufacture, whichever comes first, in clean potable water applications. Saltwater and corrosive liquids are outside the warranty.

SR, SSI or STS β€” how do I choose?

SR and SSI are stainless steel with a built-in check valve, for clean water. STS is a ductile iron submersible turbine with stainless impellers, built for abrasive water and higher flows. Choose 316 SS SR for corrosive water.

Does the pump end include a check valve?

SR and SSI pump ends have one built in. STS pump ends do not; order it separately. The 4 in High Capacity is offered with or without an internal check valve.

Can I put a 6 in pump end on a 4 in motor?

Some builds allow it. Franklin lists a 6 x 4 in adaptor kit for SR models of 10 HP and below, and the 6 in High Capacity bracket takes a 4 in or 6 in motor on 5–10 HP units. Each listing shows the motor fit per build.

How do I size a pump end?

Work out flow and total dynamic head, then pick the build whose rated head at your flow clears it, and confirm against the Franklin curve before ordering. The Submersible Calculator gives flow and head; we confirm the selection.

Need a Pump End Matched to a Motor?

Send flow, head, well diameter and power supply. We will match pump end, motor, control and cable.

Technical data on this page is taken from Franklin Electric product literature and is subject to change by the manufacturer. Confirm against the current installation manual before specifying.

Franklin Electric, SubDrive, MonoDrive, QuickPAK, SolarPAK, Fhoton, MagForce, Tri-Seal, Pumptec and SubMonitor are trademarks of Franklin Electric Co., Inc. Grundfos and SP are trademarks of Grundfos Holding A/S. A.Y. McDonald and Baker are trademarks of A.Y. McDonald Mfg. Co. used here for product identification only.

Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial supplier based in Houston, Texas.