Pipeline engineers assure the safety of field joints by installing Dresser Style 110 Reinforcing Sleeves on welded joints where special precautions are required. Style 110 sleeves can be used on defective trouble spots on piping systems at highway, river and railroad crossings, at over bends and tie-ins, in marshy ground, near buildings and other places where special precautions are necessary.

Style 110 Dresser Spec Sheet

The Style 110 sleeve lends itself to field welding without preheating, using ordinary field welding procedures. All sleeves are factory prepared with standard welding bevel, machine flame cut for uniformity and ease of welding, and come with a drilled vent hole to preclude pressure build up between sleeve and pipe.

• Body : High strength
• low carbon steel meeting ASTM A572 GR 50/ ASTM
• Yield Strength: 50
• 000 PSI Min.
• Temp. Ratings : -20 °F to +150 °F