Menu
Your cart is empty
Looks like you haven't added anything to your cart yet
Campbell Driven Well Equipment
Availability
Type
Price
$0
$663.54
Campbell Driven Well Equipment Accessories
Campbell
Campbell Driven Well Equipment Accessories
- Price
- From $6.84
Campbell Driven Well Equipment
Well Points · Pitcher Pumps · Drive Hardware
Driven Well EquipmentStainless Well Points · Pitcher Pumps · Drive Shoes & Leathers
Stainless steel well points in 1 1/4 in and 2 in — 60, 80, and 100 mesh gauze for shallow driven wells. Pitcher hand pumps for off-grid and emergency water supply. Drive shoes, cup leathers, valve leathers, and drive couplings.
SS
Stainless Construction
3
Mesh Sizes
24–48"
Point Lengths
36+
Catalog SKUs
Driven Well System Components
A driven well is the simplest possible water supply — a pointed screen driven into a shallow water-bearing sand layer with a hand or jet pump on top. Suitable for shallow aquifers (typically <25 ft) and off-grid or emergency installations.
1 1/4 in Stainless Well Points
Standard Residential / Hand Pump · S-Series
Stainless steel well points with 1 1/4 in NPT inlet for connection to galvanized drive pipe. Available in 24, 30, 36, and 48 in screen lengths and three mesh sizes (60, 80, 100 gauze) to match aquifer sand grade. Standard for hand-pump and small jet-pump driven wells.
SizesS24, S30, S36, S48
Lengths24, 30, 36, 48 in
Mesh Options60, 80, 100 gauze
MaterialStainless steel
Connection1 1/4 in NPT
2 in Stainless Well Points
Larger Flow · Jet Pump Service
2 in NPT well points for larger jet-pump installations and small commercial driven wells. Higher flow capacity than 1 1/4 in versions. S236 (36 in) and S248 (48 in) lengths in 60, 80, and 100 mesh.
SizesS236, S248
Lengths36, 48 in
Mesh Options60, 80, 100 gauze
MaterialStainless steel
Connection2 in NPT
Pitcher Hand Pumps
PP2 Cast Iron · WP2 Plastic · Off-Grid Standard
PP2 cast iron pitcher pump — the traditional shallow-well hand pump. WP2 plastic hand-lift pump for budget and emergency applications. Both include a built-in plunger assembly. PP2-PA replacement plunger assembly available. Maximum lift typically 22 ft.
PP2Cast iron pitcher pump
WP2Plastic hand-lift pump
PP2-PAPlunger assembly (replacement)
Max Lift~22 ft (atmospheric)
Drive Shoes & Leathers
DS6 Drive Shoe · Cup & Valve Leathers
DS6 1/4W welded drive shoe with cable lugs for driving 6 in casings. Replacement cup leathers (700, 702, 704, 711 series) for pitcher pump plungers and hand-pump valve assemblies. SWDC5 1 1/4 in drive coupling for joining drive pipe sections.
Drive ShoeDS6 1/4W (6 1/4 in casing)
Drive CouplingSWDC5 (1 1/4 in)
Cup Leathers702, 704, 711 series
Valve Leather700 3 1/2 X 3
1 1/4 in Well Point Sizing Reference
All 1 1/4 in points are stainless steel construction. Mesh size matches aquifer sand grade — finer mesh for finer sand, coarser mesh for coarser sand and gravel.
| Part Number | Length | Mesh | Best Aquifer Type |
|---|---|---|---|
| S24-60 | 24 in | 60 gauze | Coarse sand / fine gravel |
| S30-60 | 30 in | 60 gauze | Coarse sand / fine gravel |
| S36-60 | 36 in | 60 gauze | Coarse sand / fine gravel |
| S48-60 | 48 in | 60 gauze | Coarse sand / fine gravel |
| S24-80 | 24 in | 80 gauze | Medium sand |
| S30-80 | 30 in | 80 gauze | Medium sand |
| S36-80 | 36 in | 80 gauze | Medium sand — most common |
| S48-80 | 48 in | 80 gauze | Medium sand · deeper aquifer |
| S24-100 | 24 in | 100 gauze | Fine sand / silty water |
| S30-100 | 30 in | 100 gauze | Fine sand / silty water |
| S36-100 | 36 in | 100 gauze | Fine sand / silty water |
| S48-100 | 48 in | 100 gauze | Fine sand · deeper aquifer |
Mesh selection rule: Finer aquifer = finer mesh. Mismatched mesh either lets sand through (mesh too coarse) or clogs immediately (mesh too fine). When in doubt, start with 80 gauze — it handles the widest range of typical residential aquifer conditions.
2 in Well Point Sizing Reference
2 in points carry more flow than 1 1/4 in — specify when you need higher GPM at the wellhead.
| Part Number | Length | Mesh | Application |
|---|---|---|---|
| S236-60 | 36 in | 60 gauze | Coarse sand · jet pump · higher flow |
| S248-60 | 48 in | 60 gauze | Coarse sand · deeper / higher flow |
| S236-80 | 36 in | 80 gauze | Medium sand · jet pump · higher flow |
| S248-80 | 48 in | 80 gauze | Medium sand · deeper / higher flow |
| S236-100 | 36 in | 100 gauze | Fine sand · jet pump · higher flow |
| S248-100 | 48 in | 100 gauze | Fine sand · deeper / higher flow |
Pitcher Pump & Replacement Parts
Pitcher pumps are the standard atmospheric-lift hand pump for shallow driven wells. Replacement leathers are the primary wear part — cheap, easy to swap, restore lost pumping efficiency.
| Part Number | Description | Use |
|---|---|---|
| PP2 | Cast iron pitcher pump | Standard shallow-well hand pump |
| WP2 | Plastic hand-lift pump | Budget · emergency · lighter weight |
| PP2-PA | Plunger assembly (replacement) | Restore PP2 pumping efficiency |
| 700 3 1/2X3 | Valve leather 3 1/2 in x 3 in | PP2 valve seat replacement |
| 702 2X1 5/16 | Cup leather 2 in x 1 5/16 in | Smaller plunger replacement |
| 702 3X2 | Cup leather 3 in x 2 in | PP2 plunger replacement |
| 704 3X2 | Cup leather 3 in x 2 in (Type 704) | Alt PP2 plunger |
| 711 2X1 1/4 | Cup leather 2 in x 1 1/4 in | Smaller hand pump replacement |
| 711 3X2 | Cup leather 3 in x 2 in (Type 711) | Standard pitcher cup leather |
| DS6 1/4W | Drive shoe · 6 1/4 in · weld + cable | Drive 6 in casing into ground |
| SWDC5 | 1 1/4 in drive coupling | Join drive pipe sections |
| 40RB6SX4F | 1 1/2 S x 1 F red bushing | Pipe-size adapter for pumps |
| TRB8-5 | 2 x 1 1/4 threaded reducing bushing | 2 in to 1 1/4 in pipe transition |
Driven Well Install Best Practices
A driven well is the simplest possible water supply — but only if the geology cooperates. Get the basics right and you have water for decades.
Verify Aquifer Depth First
Driven wells require shallow water-bearing sand within ~25 ft of grade. Beyond that, the suction lift exceeds atmospheric capacity and a hand or jet pump can't pull water. Check with neighbors or a local driller before driving.
Match Mesh to Sand
The screen mesh must match aquifer sand grade. Too coarse = sand through the screen and pump damage. Too fine = clogs in days. 80 gauze is the safe default for typical residential aquifers; 60 for coarse, 100 for fine.
Drive Cap, Not Point
Always drive on a drive cap or drive coupling — never strike the well point itself. Direct strikes on the point or the screen damage the gauze and ruin the well before it produces water.
Pumping In = Sand Out
After driving to depth, pump the well aggressively for 30+ minutes to develop the screen — this draws fine sand out and creates a natural filter pack of coarser sand around the screen. Skipping this step shortens screen life dramatically.
Cup Leather is the Wear Part
Pitcher pump pumping efficiency drops as the cup leather dries out and cracks. Replace the cup leather (702, 711) every 1–2 years on a regularly used pump. The leather is $15–$30 — a full pump rebuild can be avoided indefinitely.
Off-Grid Backup Capability
A driven well + pitcher pump is a complete off-grid water source requiring no electricity. Highly recommended as emergency backup in hurricane and ice-storm prone areas. Pair with a sanitary well seal at the casing top — even a hand pump well needs surface contamination protection.
Application Selection
Off-Grid Cabin Water Supply
Use S36-80 well point + PP2 cast iron pitcher pump. Reliable hand-pumped supply for shallow aquifers. No electricity required.
Emergency Backup — Hurricane Zone
Use S30-80 well point + WP2 plastic hand-lift pump. Lighter weight, easier to deploy. Pair with stored fuel for jet pump on grid recovery.
Livestock Watering — Pasture
Use S236-60 (2 in) well point + small jet pump. Higher flow for trough fill. Coarser mesh handles typical pasture-area aquifer sand.
Sandy Aquifer (Gulf Coast / East Texas)
Use S36-100 fine-mesh well point. Fine sand requires the 100 gauze to keep silt out of the pump. Develop screen aggressively at first install.
Coarse Sand / Gravel Aquifer
Use S36-60 coarse mesh well point. Larger openings handle the natural coarse aquifer without clogging. Higher flow rate than fine mesh.
Existing Driven Well — Pump Replacement
Pull the existing point if accessible. Replace with same-size point matched to the original mesh (or finer if sand has been a problem). New PP2 + cup leathers for hand-pump installations.
Pitcher Pump Restoration
Use PP2-PA plunger assembly + 711 3X2 cup leather + 700 3 1/2X3 valve leather. Restores a tired pitcher pump to like-new pumping capacity for under $80.
Multi-Section Drive Pipe
Use SWDC5 drive couplings to join galvanized drive pipe sections. Rated for hammer-driving load. Standard 1 1/4 in pipe matches the typical S-series well point.
Frequently Asked Questions
What is a driven well and when does it make sense?
A driven well is a well point hammered into the ground until it reaches a shallow water-bearing sand layer. Suitable for aquifers within ~25 ft of grade. Common applications: off-grid cabins, emergency backup water, livestock watering on pasture, irrigation supply, garden water. Doesn't require a drilling rig — can be installed by hand with a sledge or a fence-post driver.
How deep can I drive a well?
Practically 25–30 ft maximum. Beyond that, atmospheric pressure can't lift water more than ~28 ft (and that's at sea level on a perfect day). For deeper aquifers, you need a drilled well with a submersible pump — a driven well + hand or jet pump won't reach the water.
What mesh size do I need?
Match mesh to aquifer sand grade. 60 gauze = coarse sand and fine gravel. 80 gauze = medium sand — the safe default for most residential aquifers. 100 gauze = fine sand and silty groundwater (common Gulf Coast / East Texas). When in doubt, ask a local driller what they typically log in your area.
Why stainless steel for the well point?
The screen sits in saturated sand for the well's entire life — galvanized fails within 5–10 years due to electrolytic corrosion at the screen welds. Stainless lasts 20+ years even in iron-laden or salty water. The cost premium over galvanized is small relative to the cost of pulling and replacing a corroded point.
Can I drive a well by hand?
Yes — with a heavy fence-post driver, sledge hammer, or rented well driver. Always strike on a drive cap or drive coupling, never directly on the well point. Bigger wells (2 in points, deeper drives) typically benefit from a powered driver. Houston-area soil is mostly drivable with hand tools to ~20 ft if there's no clay layer.
What's a pitcher pump and how high can it lift?
A pitcher pump is the traditional cast-iron hand-operated atmospheric lift pump. Practical lift is ~22 ft — theoretically 28 ft at sea level but cup-leather and seal losses limit you to ~22 ft. For shallow driven wells under 22 ft, the PP2 is reliable for decades. Above 22 ft you need a deep-well hand pump or a powered jet pump.
How often do I replace cup leathers?
For a regularly used pitcher pump: every 1–2 years. The leather dries out, cracks, and loses its seal — pumping efficiency drops to where you're working hard for half the water. The 702 or 711 cup leather is $15–$30 and a 15-minute job. For pumps used only in emergencies, inspect annually and replace if dry or cracked.
Can I install a sanitary cap on a driven well?
Yes — and you should, especially if the well will be used for drinking water. A driven well still needs surface contamination protection. Specify a Campbell sanitary well seal sized to your drive pipe at the top of the casing where the pump mounts. Hand-pump wells get the same level of contamination risk as electrified wells.
What length well point should I order?
Match to anticipated saturated zone thickness. 24–30 in for thin saturated layers. 36 in standard for most residential. 48 in for thick saturated zones or where you want maximum surface area for higher flow. Longer screens cost more but produce more water and develop better.
Need Help with a Driven Well Install?
Tell us your aquifer depth, sand grade (or local well-driller report), and intended use (hand pump, jet pump, livestock, irrigation). We'll spec the well point, drive hardware, and pump and ship from Houston same day.
281.664.8000
Watermain Supply · Authorized Campbell Manufacturing Distributor · Houston, TX
281.664.8000 · sales@watermainsupply.com · www.watermainsupply.com
281.664.8000 · sales@watermainsupply.com · www.watermainsupply.com
- Choosing a selection results in a full page refresh.