Menu
Monitor
Monitor
Monitor
Monitor
Monitor
Monitor
Monitor
Monitor
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
A.Y. McDonald Mfg. Co.
Ball, gate, stop, check, foot and pressure reducing valves, well tank tees and fitting packages, pressure switches, brass nipples and fittings, and compression fittings from A.Y. McDonald, Campbell and Monitor. Pick by connection and size; we help with the rest.

This collection holds the valves, tank connections and fittings that sit between a well pump or city service and the house or building, from three manufacturers. A.Y. McDonald supplies its No-Lead brass and bronze plumbing line, including PEX and press fit valves and pressure reducing valves. Campbell adds a wide range of check and foot valves up to 8 in, PVC valves, tank tee packages and compression fittings. Monitor adds lead-free red brass Break-A-Way and pump control tank tees, a weatherproof pressure switch and concentric well fittings.
Not sure which part you need? Send the pipe size, connection and job to sales@watermainsupply.com or call 1-888.510.4036 and we will reply with part numbers. All products are genuine, factory-new equipment in original manufacturer packaging, sold and supported by Watermain Supply, an independent industrial supplier.
The three questions buyers ask first.
A.Y. McDonald plumbing parts are No-Lead and certified to NSF/ANSI 372. Campbell offers lead free brass versions and Monitor tank tees are lead-free red brass; the material is named on each listing.
Full port brass ball valves from both brands are rated 600 WOG or psi WOG; Campbell brass check and foot valves 200 psi WOG; PVC ball valves 150 psi at 73 F. Ratings are on each listing.
Match the valve to the pipe first: FNPT, sweat, PEX, press fit, insert, compression or slip.
Work out flow and head in a few minutes, or send the duty to 1-888.510.4036 or sales@watermainsupply.com.
Tank CalculatorWatermain Supply is an Authorized Stocking A.Y. McDonald and Baker Water Systems Distributor.

Shut-off, every connection
Full port No-Lead ball valves in threaded, sweat, PEX, expansion PEX, press fit, push-fit and insert ends, plus stainless steel models.

Isolation and fixture stops
Full port gate valves and straight, angle and drain-equipped stop valves for fixture and branch isolation.

Backflow and debris
Swing, Y-pattern and spring inline check valves, bronze Y-strainers, the 72116T foot valve and anti-sweat valves.

High city or well pressure
Union-end 72602 series PRVs with replaceable end pieces for FNPT, sweat, PEX, press fit and CPVC, plus repair kits.

Pump to tank
Tank tees and complete tank tee kits, water well pressure switches, insert fittings, hose clamps, drop couplings and the 72232 pitless adapter.

Finishing the run
2200 red brass nipples and No-Lead brass caps, plugs, bushings, couplings, unions, tees, crosses, elbows and flanges.
Check and foot valves, plumbing valves, tank tees and compression fittings.
Watermain Supply is an Authorized Campbell Manufacturing Distributor. Campbell builds water well and plumbing valves and fittings in brass, stainless, PVC and cast iron, from small residential check valves to 8 in foot valves.

Well, suction and sump lines
Lead free brass and stainless check and foot valves, Enviro-Check valves, SLO PVC spring and swing checks, Brady delrin valves and cast iron foot valves to 8 in.

Brass, stainless and PVC
Full port brass and stainless ball valves, gate and swing check valves, boiler drains and hose bibbs, plus Schedule 80 PVC ball valves.

Pump to tank
Solid, fabricated and union tank tees and crosses, tank manifolds, constant-pressure manifolds and tank fitting packages, unassembled or factory built and pressure tested.

Poly and PVC pipe
Hanflo poly-pipe compression adapters, couplings, tees and elbows by SDR class, and PVC and galvanized compression couplings including Flolock.
Break-A-Way and pump control tank tees, pressure switch and concentric fittings.
Watermain Supply is an Authorized Monitor Distributor. Monitor, part of Baker Water Systems, builds lead-free red brass tank tees and well fittings. Monitor well caps, pitless adapters and hydrants are in Monitor Water Well Products.

Pump to tank
Lead-free red brass tank tees with Type L copper tube and stainless lock screws, in male, female and stub tank connections with 1/4, 1/2 or 3/4 in ports.

Switch and gauge above the floor
A tee that can sit anywhere in the piping, so the pressure switch and gauge move up off the floor. Works with almost any tank.

Outdoor and wet locations
Weatherproof switch that keeps out rain, snow, dust and insects, factory set 40-60 psi, in 1 HP and 2 HP versions.

Concentric deep well piping
Concentric seal cross and ball elbow to terminate or raise concentric pressure and suction piping near the pump.
Where the three lines overlap and where they differ.
| Part | A.Y. McDonald | Campbell | Monitor |
|---|---|---|---|
| Ball valves | Full port No-Lead brass, 600 WOG to 2 in; PEX, press fit, push-fit, insert and stainless | Full port brass and stainless, 600 psi WOG; Schedule 80 PVC, 150 psi | Not in this collection |
| Check valves | Swing, Y-pattern and spring inline, No-Lead bronze | Lead free brass, stainless, Enviro-Check, PVC and delrin; tapped versions for gauges | Not in this collection |
| Foot valves | 72116T, stainless screen | Brass, stainless, Enviro-Check, plastic and cast iron, 1/2 to 8 in | Not in this collection |
| Pressure reducing valves | 72602 series, union ends, 25 to 75 PSI | Not in this collection | Not in this collection |
| Tank tees | Tees 11 to 16 in and kits with switch and gauge | Tees, crosses and manifolds; packages loose or factory built | Break-A-Way lead-free red brass tees; pump control tee, 100 psi |
| Pressure switches | 20/40, 30/50 and 40/60 | In tank fitting packages | All-Weather, 40-60, 1 or 2 HP |
| Fittings | Red brass nipples, threaded fittings, insert fittings and clamps | Compression fittings for poly and PVC | Concentric seal cross and ball elbow |
Quick rule. A.Y. McDonald for No-Lead brass with PEX, press fit and PRVs; Campbell for the widest check and foot valve range, large sizes and compression fittings; Monitor for Break-A-Way and pump control tank tees and concentric well fittings. All three cover tank tees.
Start from the job.
| Job | Choose |
|---|---|
| New well pressure tank | A.Y. McDonald tank tee kit, Campbell tank fitting package or Monitor Break-A-Way tee |
| Switch and gauge up off the floor | Monitor Pump Control Tank Tee |
| Outdoor or well pit pressure switch | Monitor All-Weather Pressure Switch, 40-60 |
| Concentric deep well jet piping | Monitor concentric seal cross or ball elbow |
| Constant-pressure pump system | Campbell constant-pressure manifold |
| Replace a pressure switch | A.Y. McDonald water well pressure switch, 20/40, 30/50 or 40/60 |
| High city pressure | A.Y. McDonald 72602 PRV |
| Shallow well or lake suction line | Foot valve: A.Y. McDonald 72116T or Campbell, up to 8 in |
| Pump discharge backflow | Check valve: A.Y. McDonald spring or swing, Campbell brass, Enviro-Check or PVC |
| Poly pipe to well or hydrant | A.Y. McDonald insert fittings and clamps, or Campbell Hanflo compression |
| Shut-off on PEX or copper | A.Y. McDonald PEX, press fit or sweat ball valve |
| PVC line shut-off | Campbell Schedule 80 PVC ball valve |
Quick rule. Pick the connection, then the pressure rating, then the brand.
Setup tips that prevent callbacks.
Size the tank first with the Tank Calculator, or see all calculators.
More well and water system collections.
Across both lines.
No-Lead A.Y. McDonald parts, lead free Campbell brass and Monitor red brass tees.
FNPT, sweat, PEX, press fit, push-fit, insert, compression and slip.
Campbell check and foot valves to 8 in.
Tank tee kits and fitting packages, loose or factory built.
Replace the valve without cutting pipe.
Handles, PRV kits and foot valve parts listed.
We match the part to the pipe, the pressure and the pump, not just the size.
We list three brands. If one fits your job better, we will say so.
Contractor, driller, mechanical and municipal accounts on approved credit. Ask us to set one up.
Handles, stems, end pieces and repair kits listed alongside the valves.
Pump, tank, tank tee, valves and fittings on one order.
We size, quote and support from Houston for contractors, engineers, drillers and utilities.
A.Y. McDonald plumbing parts are No-Lead and certified to NSF/ANSI 372. Campbell offers lead free brass versions, and Monitor tank tees are lead-free red brass. The material is named on each listing.
A check valve stops backflow in a line. A foot valve is a check valve with a screen that sits at the bottom of a suction pipe and keeps the pump primed.
A kit includes the switch, gauge and drain or relief valves, so it suits a new install. Buy the tee alone when replacing only the tee.
Match the switch you are replacing, or choose one whose cut-out the pump can reach. 30/50 is the most common for homes.
Yes. The A.Y. McDonald 72602 series ships at 50 PSI and adjusts from 25 to 75 PSI.
Small fittings and valves sell in packs so the order covers a typical job. The pack quantity and per-pack price are on each option.
Yes. Email sales@watermainsupply.com or call 1-888-510-4036 with the pipe size, connection and job.
Send the pipe size, connection and job. We will reply with part numbers from any of the three brands.
Technical data on this page is taken from A.Y. McDonald, Campbell and Monitor product literature and is subject to change by the manufacturer. Confirm against the current installation manual before specifying.
A.Y. McDonald is a trademark of A.Y. McDonald Mfg. Co. Campbell, Enviro-Check, Hanflo, Flolock and WellMate are trademarks of Campbell Manufacturing, Inc. Monitor and Break-A-Way are trademarks of Monitor Manufacturing. Names are used here for product identification only.
Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial supplier based in Houston, Texas.