Campbell ABS Well Seal - Jet Pump Single Hole - 4 to 6-1/4 in Casing

Campbell ABS Well Seal — Jet Pump Single Hole (PJ Series) by Campbell Manufacturing.

• Lightweight, corrosion-resistant ABS construction for jet pump installations
• Single pipe hole — available in casing sizes 4 in, 5-5/8 in, 6 in, and 6-1/4 in (sized by casing ID)
• Blank (no hole) models available for custom drilling
• Select your casing size and drop pipe size from the dropdowns

Well seals are sized to the casing inside diameter (ID). The seal drops inside the casing and its gasket compresses outward against the inside wall (and inward around the pipe) to form the seal. Measure straight across the inside of the casing mouth — not around the outside — and match that measurement to the casing size in the dropdown. Note: standard 6 in steel casing measures about 6-5/8 in across the outside but only about 6 in inside, so it takes a 6 in seal, not a 6-1/2 in. Always size to the inside measurement.

Not sure of your ID? Send your casing inside diameter, pipe size, and casing material to sales@watermainsupply.com and we'll confirm the exact SKU before you order.