Why Accessories Matter

The right accessories extend your pump’s life, prevent nuisance failures, and give you warning before a problem becomes a flooded basement. Baker offers a focused lineup of accessories specifically designed for their DuraMAC sump, sewage, and effluent pumps. Every item here is purpose-built — no generic parts that “sort of fit.”

Pump Raiser Block — 5000BLK

A durable ABS block that mounts to the pump base, raising the pump off the bottom of the basin.

• Prevents clogging — lifts the intake away from sediment that settles at the basin floor
• Prevents switch malfunction — keeps the float switch clear of debris
• Replaces bricks — unlike bricks, it won’t crumble, shift, or corrode
• Fits all DuraMAC submersible pumps (excludes sewage pumps)

Basin Extension — 5000EXT

An 18″ diameter × 6″ high extension ring that adds depth to an existing sump basin. When your current basin isn’t deep enough for proper pump and float switch operation, the extension gives you the extra height without tearing out and replacing the entire basin.

Replacement Float Switches

Baker’s replacement float switches use piggy-back plug design — the switch plugs into the wall outlet, and the pump plugs into the switch. This means you can diagnose a bad switch over the phone (bypass the switch by plugging the pump directly into the outlet) and replace the switch without replacing the pump.

Wastewater Pump Accessories

For Baker’s Wastewater-series pumps (sewage, effluent, grinder), additional accessories are available:

Pumpmaster & Verticalmaster Float Switches

Mechanically activated float switches for direct control of single-phase pumps. Available in various cord lengths (10′–30′), pump-up and pump-down configurations, with or without piggy-back plugs.

Tank Alert Alarm Systems

High-water alarm systems that warn you when water levels exceed normal operating range:

Basins & Covers

Quick Reference: What to Buy With Your Pump