Grundfos CRI 10 vertical multistage pump end, motor not included
Grundfos CRI 10 vertical multistage pump end, motor not included

Grundfos CRI 10 Vertical Multistage Pump End, Motor Not Included

Model: CRI 10-1
Connection and Seal: ANSI Flanged - HQQE

Product variant with selected options does not exist!
$2,805.72
SKU: 96126764
Weight : 77.0009 lb
Free Shipping $499 or more
Need it fast? Call for same-day shipping options: 281.664.8000
Description
Product includes Pump End only. Motors are sold separately.
GRUNDFOS · VERTICAL MULTISTAGE PUMP END
CRI 10 Pump End
Vertical multistage pump end in AISI 304 stainless, 14 stage counts from CRI 10-1 to CRI 10-17, cartridge shaft seal, in 2 in ANSI 300 lb flanged and 2 in FlexiClamp clamp connection. Motor not included.
Pump End Only
14 Models
1–17 Stages
2 in ANSI 300 lb or 2 in FlexiClamp
232 or 362 psi
304 Stainless
Motor Not IncludedThis listing is the pump end only — the hydraulic assembly with its chambers, impellers, shaft and cartridge seal, with no motor. The horsepower and NEMA frame against each part number are a selection rating and a mounting face: they tell you what motor the pump end is built to accept, not what ships with it. Order the motor separately and confirm the frame and coupling against the part number before you buy.
Ships by FreightCRI 10-8, CRI 10-9, CRI 10-10, CRI 10-12, CRI 10-14, CRI 10-16 and CRI 10-17 on the 2 in ANSI 300 lb build and CRI 10-10 on the 2 in FlexiClamp build ship on a pallet by LTL freight rather than by parcel carrier. A delivery appointment, a dock or a liftgate may be needed; ask us before ordering if the site has none of those. Only the builds named here ship by freight; every other model and connection in this listing ships by parcel carrier as usual.
FlexiClamp, Not NPTThe non-flanged CRI pump end uses a FlexiClamp connection, Grundfos type CA — a clamped stub, not a threaded port. Some price lists describe it as NPT; that is wrong, and a pump end ordered on that assumption will not thread onto existing pipework. Ask us to confirm what the clamp set includes against your part number.
What This Is

A CRI pump end is an entire Grundfos vertical multistage hydraulic assembly — pump head, base, chamber stack, impellers, shaft and cartridge shaft seal — supplied without a motor. It is what you order to rebuild an existing CRI installation, to re-stage a pump whose duty has changed, or to build a pump onto a motor you already have.

The pump head, base, chambers, impellers, shaft and sleeves are all AISI 304 stainless steel — housing and wetted parts alike. That all-stainless construction is what separates CRI from CR. The layout is in-line: suction and discharge sit on the same centreline at the same height, so it drops into a straight pipe run.

This listing covers the CRI 10 frame in 2 in ANSI 300 lb flanged and 2 in FlexiClamp clamp connection. Choose the connection with the seal in the variant selector — the two builds differ in port size, pressure rating and shipping weight, and the table below sets them side by side.

Genuine Grundfos equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
Connections
Connection Port Flange Max pressure Models Shipping weight
2 in ANSI 300 lb 2 in ANSI 300 lb 232 psi to CRI 10-10, 362 psi from CRI 10-12 up CRI 10-1 to CRI 10-17 (14) 77–234 lb
2 in FlexiClamp 2 in FlexiClamp, no flange 232 psi CRI 10-1 to CRI 10-10 (10) 71–112 lb

The two builds are not interchangeable in the field: the connection is cast into the pump head and base, so a pump end ordered in the wrong style will not bolt to existing pipework. Match it to what is already installed.

Models
2 in ANSI 300 lb
Model Stages Motor rating NEMA frame Max pressure Shipping weight
CRI 10-1 1 3/4 HP 56C 232 psi 77 lb
CRI 10-2 2 1-1/2 HP 56C 232 psi 77 lb
CRI 10-3 3 3 HP 182TC 232 psi 97 lb
CRI 10-4 4 3 HP 182TC 232 psi 99 lb
CRI 10-5 5 5 HP 182TC 232 psi 105 lb
CRI 10-6 6 5 HP 182TC 232 psi 104 lb
CRI 10-7 7 7-1/2 HP 213TC 232 psi 106 lb
CRI 10-8 8 7-1/2 HP 213TC 232 psi 115 lb
CRI 10-9 9 7-1/2 HP 213TC 232 psi 117 lb
CRI 10-10 10 7-1/2 HP 213TC 232 psi 119 lb
CRI 10-12 12 10 HP 213TC 362 psi 207 lb
CRI 10-14 14 15 HP 254TC 362 psi 218 lb
CRI 10-16 16 15 HP 254TC 362 psi 229 lb
CRI 10-17 17 15 HP 254TC 362 psi 234 lb
2 in FlexiClamp
Model Stages Motor rating NEMA frame Max pressure Shipping weight
CRI 10-1 1 3/4 HP 56C 232 psi 71 lb
CRI 10-2 2 1-1/2 HP 56C 232 psi 71 lb
CRI 10-3 3 3 HP 182TC 232 psi 90 lb
CRI 10-4 4 3 HP 182TC 232 psi 93 lb
CRI 10-5 5 5 HP 182TC 232 psi 98 lb
CRI 10-6 6 5 HP 182TC 232 psi 97 lb
CRI 10-7 7 7-1/2 HP 213TC 232 psi 99 lb
CRI 10-8 8 7-1/2 HP 213TC 232 psi 108 lb
CRI 10-9 9 7-1/2 HP 213TC 232 psi 110 lb
CRI 10-10 10 7-1/2 HP 213TC 232 psi 112 lb

The motor rating and NEMA frame are the motor this pump end is built to accept. No motor is supplied. Stage count is the second number in the model — more stages means more head at the same flow without changing the footprint.

Shaft Seal Options
  • HQQE — silicon-carbide faces, EPDM elastomers, -4 to 248 °F liquid range.
  • HQQV — silicon-carbide faces, FKM (Viton) elastomers, -4 to 194 °F liquid range.

Both are cartridge seals: the seal is replaced as a complete unit without dismantling the pump or setting faces by hand. In the Grundfos code the last letter is the elastomer — E = EPDM, V = FKM (Viton). If you are pumping water, HQQE.

Specifications
Specification Value
Supplied as Pump end only — no motor
Frame CRI 10
Stage counts 1 to 17 (14 models)
Connections available 2 in ANSI 300 lb flanged (Grundfos type FGJ, DIN / ANSI / JIS)
2 in FlexiClamp clamp connection (Grundfos type CA, FlexiClamp)
Maximum operating pressure 2 in ANSI 300 lb: 232 psi to CRI 10-10, 362 psi from CRI 10-12 up
2 in FlexiClamp: 232 psi
Motor rating accepted 3/4 to 15 HP, NEMA 182TC, 213TC, 254TC, 56C C-face
Pump head and base AISI 304 stainless steel (EN 1.4301)
Chambers, impellers, shaft, sleeves AISI 304 stainless steel (EN 1.4301)
Shaft seal Cartridge, silicon carbide / silicon carbide faces
Seal codes available HQQE and HQQV
Drinking water approval NSF/ANSI 61
Curve tolerance ISO9906:2012 3B
Pumped liquid Clean, thin, non-aggressive, non-explosive liquids without solid particles or fibres
Orientation Vertical in-line

A pump end carries no maximum ambient temperature, because there is no motor to rate. The ambient limit comes from whichever motor you fit.

Part Numbers
Model Connection Seal Motor rating NEMA frame Part No.
CRI 10-1 2 in ANSI 300 lb HQQE 3/4 HP 56C 96126764
CRI 10-1 2 in ANSI 300 lb HQQV 3/4 HP 56C 96126806
CRI 10-1 2 in FlexiClamp HQQE 3/4 HP 56C 96126778
CRI 10-1 2 in FlexiClamp HQQV 3/4 HP 56C 96126820
CRI 10-2 2 in ANSI 300 lb HQQE 1-1/2 HP 56C 96126765
CRI 10-2 2 in ANSI 300 lb HQQV 1-1/2 HP 56C 96126807
CRI 10-2 2 in FlexiClamp HQQE 1-1/2 HP 56C 96126779
CRI 10-2 2 in FlexiClamp HQQV 1-1/2 HP 56C 96126821
CRI 10-3 2 in ANSI 300 lb HQQE 3 HP 182TC 96126766
CRI 10-3 2 in ANSI 300 lb HQQV 3 HP 182TC 96126808
CRI 10-3 2 in FlexiClamp HQQE 3 HP 182TC 96126780
CRI 10-3 2 in FlexiClamp HQQV 3 HP 182TC 96126822
CRI 10-4 2 in ANSI 300 lb HQQE 3 HP 182TC 96126767
CRI 10-4 2 in ANSI 300 lb HQQV 3 HP 182TC 96126809
CRI 10-4 2 in FlexiClamp HQQE 3 HP 182TC 96126781
CRI 10-4 2 in FlexiClamp HQQV 3 HP 182TC 96126823
CRI 10-5 2 in ANSI 300 lb HQQE 5 HP 182TC 96126768
CRI 10-5 2 in ANSI 300 lb HQQV 5 HP 182TC 96126810
CRI 10-5 2 in FlexiClamp HQQE 5 HP 182TC 96126782
CRI 10-5 2 in FlexiClamp HQQV 5 HP 182TC 96126824
CRI 10-6 2 in ANSI 300 lb HQQE 5 HP 182TC 96126769
CRI 10-6 2 in ANSI 300 lb HQQV 5 HP 182TC 96126811
CRI 10-6 2 in FlexiClamp HQQE 5 HP 182TC 96126783
CRI 10-6 2 in FlexiClamp HQQV 5 HP 182TC 96126825
CRI 10-7 2 in ANSI 300 lb HQQE 7-1/2 HP 213TC 97743230
CRI 10-7 2 in ANSI 300 lb HQQV 7-1/2 HP 213TC 97743249
CRI 10-7 2 in FlexiClamp HQQE 7-1/2 HP 213TC 97743228
CRI 10-7 2 in FlexiClamp HQQV 7-1/2 HP 213TC 97743229
CRI 10-8 2 in ANSI 300 lb HQQE 7-1/2 HP 213TC 96126771
CRI 10-8 2 in ANSI 300 lb HQQV 7-1/2 HP 213TC 96126813
CRI 10-8 2 in FlexiClamp HQQE 7-1/2 HP 213TC 96126785
CRI 10-8 2 in FlexiClamp HQQV 7-1/2 HP 213TC 96126827
CRI 10-9 2 in ANSI 300 lb HQQE 7-1/2 HP 213TC 96126772
CRI 10-9 2 in ANSI 300 lb HQQV 7-1/2 HP 213TC 96126814
CRI 10-9 2 in FlexiClamp HQQE 7-1/2 HP 213TC 96126786
CRI 10-9 2 in FlexiClamp HQQV 7-1/2 HP 213TC 96126828
CRI 10-10 2 in ANSI 300 lb HQQE 7-1/2 HP 213TC 96126773
CRI 10-10 2 in ANSI 300 lb HQQV 7-1/2 HP 213TC 96126815
CRI 10-10 2 in FlexiClamp HQQE 7-1/2 HP 213TC 96126787
CRI 10-10 2 in FlexiClamp HQQV 7-1/2 HP 213TC 96126829
CRI 10-12 2 in ANSI 300 lb HQQE 10 HP 213TC 96126774
CRI 10-12 2 in ANSI 300 lb HQQV 10 HP 213TC 96126816
CRI 10-14 2 in ANSI 300 lb HQQE 15 HP 254TC 97754608
CRI 10-14 2 in ANSI 300 lb HQQV 15 HP 254TC 97754609
CRI 10-16 2 in ANSI 300 lb HQQE 15 HP 254TC 96126776
CRI 10-16 2 in ANSI 300 lb HQQV 15 HP 254TC 96126818
CRI 10-17 2 in ANSI 300 lb HQQE 15 HP 254TC 96126777
CRI 10-17 2 in ANSI 300 lb HQQV 15 HP 254TC 96126819
What Is Supplied

Pump end only: pump head, base, chamber stack, impellers, shaft, sleeves and the cartridge shaft seal, factory assembled.

Not included: the motor, the coupling and coupling guard, the motor stool where one is required, controls, starters, drives, base plates, foundation bolts and isolation valves. If you need a complete pump, order the CRI complete-pump listing instead and we will quote it against the same duty.

Before You OrderConfirm three things: the model and stage count against the duty you need, the motor frame and coupling against the motor you intend to fit, and the connection — the 2 in ANSI 300 lb or 2 in FlexiClamp builds are not interchangeable in the field. Send us the duty point and the existing pump nameplate and we will confirm the part number.
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
CR, CRI, CRN 60 Hz Data BookletCR, CRI, CRN Product Guide (USA)CR, CRI, CRN, CRT Installation and Operating Instructions

All three documents describe the complete CR pump. A pump end is that same hydraulic assembly without its motor, so the performance curves, dimensions and materials read across — the motor and electrical sections do not apply to what ships. For a dimensional drawing or a factory submittal against a specific part number, email sales@watermainsupply.com.

Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

Share E-mail

You May Also Like