Product variant with selected options does not exist!
The MAP view should only be displayed when the product vendor matches A.Y. McDonald. For all other vendors, the MAP section should remain hidden.
The 8500 and 8600 series jet pumps use the Square Flange motor, which has a single
phase, Open Drip Proof (ODP) capacitor start.
- 303 Stainless steel shaft
- Shaft threads 7/16-20 UNF-2A, 0.625” Diameter, .91” long from face
- Ball bearings (locked drive end bearing)
- Continuous duty at 40ºC/104ºF Amient, 60Hz
- Automatic reset thermal overload protector
- Round frame (without base)
- Power leads and ground wire supplied for proper connection to the pressure switch
- Voltage change device
| Square Flange Motor | ||||||||||
| For 8500 & 8600 Series Jet Pumps (Single Phase, ODP, Capacitor Start) | ||||||||||
| Two Compartment Products | E-Z Access | ||||||||||
| Part No. | HP | RPM | Frame | Catalog Volt | Type | Service Factor | SF* Amps | MTR Lgth (1) | Ship Wt. | Factory Wired |
| 6164-200 | 1/2 | 3500 | 48Y | 115/230 | FHP | 1.9 | 11.2/5.6 | 12.0" | 19 | 115V |
| 6164-201 | 3/4 | 3500 | 48Y | 230/115 | FHP | 1.65 | 7.6/14.3 | 12.27" | 22 | 230V |
| 6164-202 | 1 | 3500 | 48Y | 230/115 | FHP | 1.65 | 9.2/18.4 | 12.35" | 24 | 230V |
| *Service Factor Amps may vary with motor manufacturer - refer to label on motor | ||||||||||
| (1) Length not including shaft | ||||||||||
Sign up for our newsletter and be the first to know about coupons and special promotions.
© 2026, Watermainsupply
