Not all boosting applications require complicated boosting systems. The DuraMAC™ Boosting system is simple, versatile, sophisticated, and reliable. With an easy setup installation and a versatile control with three modes of operation, this pump is flexible enough to meet your commercial or irrigation needs.

The 304 stainless steel version of the DuraMAC™ Booster pump will meet the needs of boosting water pressure from Reverse Osmosis (RO) systems, low PH and other agressive water applications which would be corrosive to no-lead brass and metal pipes.

• Water pressure boosting system for residential irrigation or light commercial use
• Easy set-up installation
• All metal connections - no plastic threads
• Half-gallon pressure tank included
• TEFC single phase motor for quiet operation
• Electronics separated and sealed from waterway
• No-Lead Brass / 304 stainless steel check valve included
• Dry-Run protection
• 1” inlet and outlet- 1 year warranty

• Impellers: 304 Stainless Steel
• Pump Casing Inlet: 301 Stainless Steel
• Pump Casing Outlet: 301 Stainless Steel
• Pump Seal (stationary): Silicon Carbide
• Pump Seal: (rotating) Carbon / NBR
• Diffuser: 304 Stainless Steel
• Check Valve: No-Lead Brass / Stainless Steel
• Pump Controller: Cross No-Lead Brass / Stainless Steel

• Primarily flow?activated :
  • Turns on when flow is > 0.5 GPM .
  • Shuts off when flow is < 0.5 GPM .
• Has a hob?style pressure sensor set at 30 PSI as a safety:
  • If pressure drops to 30 PSI or less , it will kick on to recharge the line, then wait for flow again.

Booster Pump Guide
E-Series Water Pressure System Spec Sheet