JCM Industries · Tapping Sleeve
JCM 464 Stainless Steel Tapping Sleeve - Outlet Seal Gasket, Carbon Steel Flange
304 Stainless, Carbon Flange · 3 to 12 in flanged outlets · 4.50-14.56 in pipe OD
175 PSI Working Pressure
304 Stainless, Carbon Flange
Buna-N Gasket
-40°F to +212°F Gasket
3 to 12 in Flanged Outlets
MSS-SP60 Tapping Valve Recess
AWWA C223 and MSS-SP124
4.50-14.56 in Pipe OD
32-216 lb Weight
Description
The JCM 464 heavy-duty stainless tapping sleeve uses thicker metal and extra bolting for reinforcement of the pipe and outlet, and a broad hydromechanical outlet seal gasket for high working pressures and problem taps such as pump and lift stations, large mains and large outlets.
JCM rates these sleeves for working pressures of 1.5 times the valves commonly used on ductile iron, PVC, PE and steel pipe, and prices the larger sizes below ductile iron MJ sleeves. The outlet is a carbon steel AWWA C207 Class D flange.
Typical application: Branching: line branches, valves, internal line access.
Key Features
- Flanged outlet recessed for the tapping valve per MSS-SP60
- Full sleeve reinforces the pipe; lighter than cast sleeves
- Rated 175 PSI on 2-12 in outlets
- Meets MSS-SP124 and ANSI/AWWA C223 as applicable
What Ships and What It Needs to Run
Included: the sleeve halves with the gasket, bolts and nuts.
Tapping valve and tapping machine, ordered separately. A flanged tapping valve bolts to the outlet; size-on-size taps need a 1/2 in undersized shell cutter.
Genuine JCM Industries equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month Warranty
Covered for 12 months from the date of purchase against defects in materials and workmanship. Keep the dated invoice as proof of purchase.
Working Pressure
175 PSI on 2-12 in outlets. JCM's service rating; higher ratings are available for specific applications and sizes.
Materials Specifications
| Body |
18-8 Type 304 stainless steel, heavy duty |
| Outlet |
Carbon steel flange per AWWA C207 Class D, ANSI 150 lb drilling, recessed per MSS-SP60 |
| Bolts |
18-8 Type 304 stainless steel |
| Gasket |
NBR (Buna-N) per ASTM D2000, pressure-activated hydromechanical design bonded into a cavity; -40°F to +212°F |
From the JCM 464 material specification.
Pipe Applications
Cast iron, ductile iron, PVC, PE, steel, A/C and other pipe within the listed ranges.
Sizes and Outlets
18 OD ranges from 4.50 to 14.56 in. Open the table for every range and outlet.
All 18 sizes
| Nominal |
Sleeve OD range |
Outlets |
| 4 in |
4.50 in |
3, 4 in |
| 4 in |
4.80 in |
3, 4 in |
| 6 in |
6.63 in |
3, 4, 6 in |
| 6 in |
6.83-7.16 in |
3, 4, 6 in |
| 6 in |
7.05-7.40 in |
3, 4, 6 in |
| 6 in |
7.40-7.73 in |
3, 4, 6 in |
| 8 in |
8.63 in |
3, 4, 6, 8 in |
| 8 in |
8.98-9.37 in |
3, 4, 6, 8 in |
| 8 in |
9.27-9.69 in |
3, 4, 6, 8 in |
| 10 in |
9.83-10.25 in |
3, 4, 6, 8 in |
| 10 in |
10.64-10.86 in |
3, 4, 6, 8, 10 in |
| 10 in |
11.03-11.47 in |
3, 4, 6, 8, 10 in |
| 10 in |
11.36-11.80 in |
3, 4, 6, 8, 10 in |
| 10 in |
11.76-12.24 in |
3, 4, 6, 8, 10 in |
| 12 in |
12.62-12.88 in |
3, 4, 6, 8, 10, 12 in |
| 12 in |
13.13-13.60 in |
3, 4, 6, 8, 10, 12 in |
| 12 in |
13.60-14.09 in |
3, 4, 6, 8, 10, 12 in |
| 12 in |
14.08-14.56 in |
3, 4, 6, 8, 10, 12 in |
From the JCM price list.
Before You OrderConfirm the pipe OD, outlet size and outlet type before ordering.
For outlets 14 in and larger, the tapping valve make must be specified for the alignment recess.
For a submittal or an odd OD, email sales@watermainsupply.com with the pipe OD, pipe type and line content.
