JCM Industries · Ductile Iron Coupling
JCM 211 Ductile Iron Coupling - IPS PVC, Steel and HDPE
Ductile iron · mechanical compression joint · 3.50-24.00 in pipe OD
150 PSI Working Pressure
Ductile Iron Sleeve and Flanges
SBR Gaskets
-40°F to +150°F Temperature
Low-Alloy, E-Coat or SS Bolts
Shop Coat or Fusion Epoxy
AWWA C219
3.50-24.00 in Pipe OD
15-165 lb Weight
Description
The JCM 211 ductile iron coupling joins plain-end pipe at IPS and steel ODs: standard IPS PVC, schedule steel pipe and IPS HDPE. The mechanical compression joint eliminates precise cutting and fitting and allows deflection, limited expansion and contraction, settlement and quick disassembly.
Typical application: Connection or repair: joins plain-end pipe and installs a repair section of pipe.
Key Features
- No beveling, threading or exact pipe alignment needed; installs with a wrench
- Gaskets absorb vibration and pipe movement and let curves be laid with straight pipe
- Shop coat or fusion epoxy body, with low-alloy, E-Coat or stainless bolts
- Meets or exceeds ANSI/AWWA C219 for bolted sleeve-type couplings
- Wide-range gaskets interchange with JCM G212 transition gaskets
What Ships and What It Needs to Run
Included: the ductile iron sleeve, two followers, two gaskets, and bolts and nuts in the build selected.
Pipe anchorage, provided at install. The coupling joins but does not restrain the pipe.
Genuine JCM Industries equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month Warranty
Covered for 12 months from the date of purchase against defects in materials and workmanship. Keep the dated invoice as proof of purchase.
Working Pressure
150 PSI working pressure. JCM rates this coupling for 150 PSI working pressure when installed per its instructions; higher pressures are available from JCM on request. Inspection of pipe integrity is the installer's responsibility.
Materials Specifications
| Sleeve and flanges |
Ductile iron, ASTM A536 |
| Gaskets |
SBR per ASTM D2000, compounded for water, salt solutions, mild acids and bases, excellent abrasion resistance; not for oil, ozone or weather-resistant service |
| Temperature |
-40°F to +150°F constant; 180°F maximum intermittent |
| Bolts and nuts |
Corrosion-resistant high-strength low-alloy bolts per ASTM A242 (AWWA C111, ANSI A21.11), nuts per A563; 304 stainless optional |
| Finish |
Heavy coat of corrosion-resistant metal primer (shop coat); fusion epoxy optional |
From the JCM ductile iron coupling material specifications.
Pipe Applications
Standard IPS PVC, schedule steel pipe and IPS HDPE.
Sizes
| Nominal |
Pipe OD range |
Bolts |
Sleeve length |
| 3 in |
3.50 in |
3 |
6 in |
| 4 in |
4.50 in |
4 |
6 in |
| 6 in |
6.63 in |
5 |
6 in |
| 8 in |
8.63 in |
6 |
6 in |
| 10 in |
10.75 in |
7 |
6 in |
| 12 in |
12.75 in |
8 |
6 in |
| 16 in |
16.00 in |
10 |
7 in |
| 18 in |
18.00 in |
12 |
7 in |
| 20 in |
20.00 in |
12 |
7 in |
| 24 in |
24.00 in |
13 |
7 in |
From the JCM size tables. Finish and bolt builds: Shop Coat (standard primer) or Epoxy Coated body, each with low-alloy bolts, E-Coat (electrocoated) bolts or stainless bolts. Less Gaskets builds ship without gaskets for use with JCM G212 transition gaskets.
Before You OrderConfirm the pipe OD and type at each end before ordering.
Anchor the pipe: the coupling joins the pipe but does not restrain it, so JCM calls for proper anchorage wherever the pipe could move out of the coupling.
For a submittal or an odd OD, email sales@watermainsupply.com with the pipe OD, pipe type and line content.
