Zoeller 6400 Series Commercial Sewage Pump

HP - Voltage: 2 HP - 200-230V 1Ph
Build: 35 ft Cord, Double Seal, SiC-SiC Lower Seal, Moisture Sensor
Part No.: 6404-0055

Product variant with selected options does not exist!

Price
$3,440
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 6404-0055
Weight : 147.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Commercial Duty Sewage Pump
Zoeller 6400 Series Commercial Sewage Pump
2 and 3 HP · 1750 RPM · 3 in solids · 4 in flange
2 or 3 HP
Up to 361 GPM
Up to 38 ft Head
3 in Solids
4 in Flanged Discharge
Overview

The 6400 Series are Zoeller Engineered Products commercial sewage pumps with 2 HP (6404) and 3 HP (6405), 1750 RPM oil-filled motors, dual mechanical seals and a cast iron vortex impeller passing 3 in solids through a 4 in horizontal ANSI flange. The 6404 delivers 300 GPM at 5 ft with a 33 ft shut-off; the 6405 delivers 361 GPM and 38 ft.

  • Dual mechanical shaft seals: upper carbon/ceramic, lower silicon carbide/carbon (silicon carbide options available)
  • Optional moisture sensing probes (require a circuit in the control panel)
  • Cast iron vortex impeller, upper and lower ball bearings, 416 stainless shaft
  • Epoxy powder coated cast iron, stainless steel hardware and handle
  • Thermal overload with automatic reset on single phase
MADE TO ORDER · LEAD TIME 4-6 WEEKS ARO
Zoeller builds each unit to the part number ordered. Lead time runs from receipt of order.
What Ships and What It Needs to Run

Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.

Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: 18 months from date of manufacture, 12 months from date of installation or 12 months from start-up with a start-up report on file with Zoeller (Commercial Duty owner’s manual ZM2670).
Specifications
Models 6404 (2 HP), 6405 (3 HP)
Max Flow at 5 ft 300 / 361 GPM
Max Head 33 / 38 ft
Solids 3 in spherical
Discharge 4 in horizontal ANSI flange
Cord 25 ft standard; 35-50 ft available
Weight 150 lb
Full Load Amps 6404: 200-230V 1Ph 12.9 · 230V 3Ph 10.5 · 460V 5.2; 6405: 18.0 · 12.2 · 6.1
Min Fluid Level 12 in
Max Water Temperature 130 °F (120 °F for WD6405)

From Zoeller Engineered Products Tech Data ZM1376 and Zoeller price data.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.

Total head in feet at each flow

Model 0 GPM (Shut-off) 60 GPM 150 GPM 220 GPM 300 GPM
6404 · 2 HP 33 30 23 16 5
6405 · 3 HP 38 34 29 22 13

Read from Zoeller’s vector performance curve (Zoeller Tech Data ZM1376) and rounded down to the whole foot. Curve ends: 6404 at 302 GPM; 6405 at 363 GPM. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.

Builds in This Listing

Pick the model, then the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.

Before You Buy — The Limits That Decide the Fit
Voltage and Phase Match the site supply exactly; three phase pumps need a three phase panel and starter.
Duty Point Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point.
Sensors Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them.
Explosion Proof Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record.
Lead Time Made to order: 4-6 weeks after receipt of order. Plan the install date around it.
Applications
  • Commercial sewage ejector basins
  • Restaurants, schools and light commercial buildings
  • Effluent and dewatering service
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like