Zoeller 6160 Series Commercial Effluent Pump

Voltage: 115V 1Ph
Build: High Flow, 35 ft Cord, Double Seal
Part No.: 6161-0007

Product variant with selected options does not exist!

Price
$2,153
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 6161-0007
Weight : 92.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Commercial Duty Effluent Pump
Zoeller 6160 Series Commercial Effluent Pump
1/2 HP · 3450 RPM · 3/4 in solids · dual seals
1/2 HP
Up to 100 GPM
Up to 66 ft Head
Dual Seals
Explosion Proof Builds
Overview

The 6160 Series are Zoeller Engineered Products commercial duty effluent and dewatering pumps: 1/2 HP, 3450 RPM, oil-filled motors in epoxy coated cast iron with dual mechanical shaft seals and a cast iron vortex impeller passing 3/4 in solids. Model 6161 is the high-flow build (100 GPM at 5 ft, 56 ft shut-off); Model 6163 is the high-head build (61 GPM at 5 ft, 66 ft shut-off).

  • Dual mechanical shaft seals: upper carbon/ceramic, lower silicon carbide/carbon (silicon carbide options available)
  • Optional moisture sensing probes (require a circuit in the control panel)
  • Cast iron vortex impeller, upper and lower ball bearings, 416 stainless shaft
  • Epoxy powder coated cast iron, stainless steel hardware and handle
  • Thermal overload with automatic reset on single phase
MADE TO ORDER · LEAD TIME 4-6 WEEKS ARO
Zoeller builds each unit to the part number ordered. Lead time runs from receipt of order.
What Ships and What It Needs to Run

Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.

Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: 18 months from date of manufacture, 12 months from date of installation or 12 months from start-up with a start-up report on file with Zoeller (Commercial Duty owner’s manual ZM2670).
Specifications
Models 6161 (high flow), 6163 (high head), 1/2 HP
Max Flow 6161: 100 GPM at 5 ft · 6163: 61 GPM at 5 ft
Max Head 6161: 56 ft · 6163: 66 ft
Solids 3/4 in spherical
Discharge 1-1/2 in NPT vertical; 2 in (10-1305) or 3 in (10-1306) flange optional
Cord 25 ft or 50 ft SOW
Weight 87 lb
Full Load Amps, 6161 115V 15.5 · 200V 3Ph 6.4 · 230V 3Ph 5.2 · 460V 2.9 · 575V 2.4
Min Fluid Level, Continuous 24 in
Max Water Temperature 130 °F

From Zoeller Engineered Products Tech Data ZM1372 and Zoeller price data.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.

Total head in feet at each flow

Model 0 GPM (Shut-off) 20 GPM 45 GPM 70 GPM 90 GPM
6161 · 1/2 HP 57 51 41 26 12

Read from Zoeller’s vector performance curve (Zoeller curve 009920 (Tech Data ZM1372)) and rounded down to the whole foot. Curve ends: 6161 · 1/2 HP at 93 GPM. 6163: Zoeller prints 66 ft maximum head and 61 GPM at 5 ft (ZM1372). 6161 printed: 56 ft and 100 GPM at 5 ft. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.

Builds in This Listing

Pick the model, then the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.

Before You Buy — The Limits That Decide the Fit
Voltage and Phase Match the site supply exactly; three phase pumps need a three phase panel and starter.
Duty Point Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point.
Sensors Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them.
Explosion Proof Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record.
Lead Time Made to order: 4-6 weeks after receipt of order. Plan the install date around it.
Applications
  • Commercial effluent and dewatering basins
  • Septic and onsite effluent dosing
  • Building drainage and sump service
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like