Zoeller Simplex Sewage Basin and Cover

Size - Material: 18 x 30 in - Polyethylene
Vent - Discharge: 2 in Integral Vent, 2 in Discharge
Cover - Part No.: Poly Cover, 4 in Pipe Seal - 31-0608

Product variant with selected options does not exist!

Price
$183
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 31-0608
Weight : 18.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Indoor Sewage Basin
Simplex Sewage Basin and Cover
18, 24 and 30 in diameter · Polyethylene, Poly Structural Foam or Fiberglass
30 to 72 Gallon Capacity
18 x 30, 24 x 24, 24 x 30 or 24 x 36 in
Polyethylene, PSF or Fiberglass
2 or 3 in Vent and Discharge
4 in Inlet: Hub, Pipe Seal or Combo Hub
Gasketed Steel, Poly or Fiberglass Cover
10 ft Stack Test Builds
Rated 130 °F
Overview

Zoeller simplex sewage basins are one-piece, seamless pits with a bolted, gasketed cover for a single sewage, effluent or grinder pump below a basement bathroom, laundry or any fixture below the sewer. The cover carries the vent and discharge connections and a cord seal, and the basin side carries a 4 in inlet hub, pipe seal or combo hub with its centerline 10-1/2 in below the top.

Sizes run from the 30 gallon 18 x 30 in basin to the 72 gallon 24 x 36 in PSF basin. Polyethylene builds are IAPMO listed; fiberglass builds marked 10 ft Stack Test are made to pass the 10 ft water stack test that some jurisdictions require. Watertight and gastight when installed per Zoeller’s instructions.

  • One-piece seamless construction
  • Cover with gasket, vent and discharge flanges or seals, and cord seal
  • 4 in inlet hub, pipe seal or combo hub on the basin side
  • 2 in or 3 in vent and discharge on the cover
  • Steel split covers let you lift the cover without removing the discharge pipe
What Ships and What It Needs to Run

Included: basin, cover with gasket, vent and discharge flanges or seals, cord seal, 4 in inlet hub, hole or pipe seal as listed, and mounting hardware.

Pump, check valve and alarm: ordered separately.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: 12 months from date of purchase.
Specifications
Materials Polyethylene, poly structural foam (PSF) or fiberglass, by build
Capacity 18 x 30 in: 30 gal · 24 x 30 in: 60 gal · 24 x 36 in: 72 gal
Wall Thickness PSF and poly 0.200 in (18 in); fiberglass 0.188 in
Inlet 4 in, centerline 10-1/2 in from top of basin
Vent and Discharge 2 in or 3 in, by build
Temperature Rating 130 °F
Listings Polyethylene sewage basins IAPMO listed; 10 ft stack test builds as marked

From Zoeller Catalog Sheet FM0487.

Before You Buy — The Limits That Decide the Fit
Indoor or outdoor Polyethylene basins are for indoor installations only
Groundwater Basins are not designed for saturated soil pressure above the top of the pit unless an independent drain relieves it
Pump fit Match basin diameter to the pump and float swing; 18 in basins suit single 1/2 HP class sewage pumps
Code Order a 10 ft Stack Test build where your jurisdiction requires it
Applications
  • Basement bathrooms and laundries
  • Sewage ejector systems
  • Effluent and grinder pump pits
Accessories and Controls
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like