Zoeller 7112 Grinder Pump - 7.5 HP

Voltage: 200-208V 3Ph
Build: High Flow Vert, 2 in Disch
Part No.: 7112-0162

Product variant with selected options does not exist!

Price
$8,684
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 7112-0162
Weight : 245.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Grinder Pump
Zoeller 7112 71 HD Grinder Pump - 7.5 HP
7.5 HP · 3450 RPM · 71 HD Series · high head, high flow and reversing builds
7.5 HP
3450 RPM
2 or 2-1/2 in Discharge
High Head or High Flow
Reversing Builds
Overview

The Zoeller 7112 is the 7.5 HP member of the 71 HD Series, heavy-duty grinder pumps for municipal pressure sewers and commercial lift stations. Builds come in high head (HH), high flow (HF) and reversing (Rev, 3-phase flange models) hydraulics with a ductile iron vortex impeller and a 2-1/2 in flanged (adaptable to 3 in) or 2 in NPT discharge.

  • Hardened 440C stainless steel cutter and plate, Rockwell C55-60
  • Epoxy coated cast iron, 304 stainless hardware
  • Upper and lower ball bearings, 416 stainless shaft
MADE TO ORDER · LEAD TIME 4-6 WEEKS ARO
Zoeller builds each unit to the part number ordered. Lead time runs from receipt of order.
What Ships and What It Needs to Run

Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.

Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: one year from date of purchase by the end user, or 18 months from date of original manufacture, whichever comes first (Zoeller owner’s manual).
Specifications
Model 7112, 7.5 HP, service factor 1.2
Speed 3450 RPM
Standard Impeller Ductile iron vortex, 7-1/8 in (high head); trims to a design point on request
Discharge 2-1/2 in flange (adaptable to 3 in) or 2 in NPT
Seals Tandem: upper carbon/ceramic, lower silicon carbide/silicon carbide
Cord 25 ft standard, #8-4 SOOW
Weight 245 lb
Full Load Amps 230V 1Ph -- · 208V 3Ph 25.3 · 230V 3Ph 22.0 · 460V 3Ph 11.0
Sensing Thermal sensors and moisture probes (panel circuit required)
Max Water Temperature 104 °F

From Zoeller Engineered Products Tech Data ZM1786 and Zoeller price data.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.

Total head in feet at each flow

Model 0 GPM (Shut-off) 15 GPM 40 GPM 65 GPM 85 GPM
7112 · 7.5 HP, 7-1/8 in 184 174 156 137 115

Read from Zoeller’s vector performance curve (Zoeller Engineered Tech Data ZM1786, high head models with 2-1/2 in flanged discharge, standard 7-1/8 in impeller) and rounded down to the whole foot. Curve ends: 7112 · 7.5 HP, 7-1/8 in at 104 GPM. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.

Builds in This Listing

Pick the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.

Before You Buy — The Limits That Decide the Fit
Voltage and Phase Match the site supply exactly; three phase pumps need a three phase panel and starter.
Duty Point Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point.
Sensors Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them.
Explosion Proof Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record.
Lead Time Made to order: 4-6 weeks after receipt of order. Plan the install date around it.
Applications
  • Municipal pressure sewer systems
  • Commercial grinder lift stations
  • Sites where solids and wipes must be reduced before pumping
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like