Menu
Product variant with selected options does not exist!
files/Zoeller_71-HD-Series-Grinder_34c42fec-26f6-4150-bf6d-9c29dea5fb55.jpg
08:23 PM
The Zoeller 7111 is the 5 HP member of the 71 HD Series, heavy-duty grinder pumps for municipal pressure sewers and commercial lift stations. Builds come in high head (HH), high flow (HF) and reversing (Rev, 3-phase flange models) hydraulics with a ductile iron vortex impeller and a 2-1/2 in flanged (adaptable to 3 in) or 2 in NPT discharge.
Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.
Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.
| Model | 7111, 5 HP, service factor 1.2 |
| Speed | 3450 RPM |
| Standard Impeller | Ductile iron vortex, 6 (3Ph) / 6-1/4 (1Ph) in (high head); trims to a design point on request |
| Discharge | 2-1/2 in flange (adaptable to 3 in) or 2 in NPT |
| Seals | Tandem: upper carbon/ceramic, lower silicon carbide/silicon carbide |
| Cord | 25 ft standard, #8-4 SOOW |
| Weight | 245 lb |
| Full Load Amps | 230V 1Ph 28.0 · 208V 3Ph 20.7 · 230V 3Ph 18.0 · 460V 3Ph 9.0 |
| Sensing | Thermal sensors and moisture probes (panel circuit required) |
| Max Water Temperature | 104 °F |
From Zoeller Engineered Products Tech Data ZM1786 and Zoeller price data.
Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.
Total head in feet at each flow
| Model | 0 GPM (Shut-off) | 15 GPM | 40 GPM | 65 GPM | 85 GPM |
|---|---|---|---|---|---|
| 7111 · 5 HP, 6-1/4 in | 144 | 137 | 123 | 107 | 91 |
Read from Zoeller’s vector performance curve (Zoeller Engineered Tech Data ZM1786, high head models with 2-1/2 in flanged discharge, standard 6-1/4 in impeller (3-phase; single-phase builds use a 6 in impeller)) and rounded down to the whole foot. Curve ends: 7111 · 5 HP, 6-1/4 in at 104 GPM. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.
Pick the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.
| Voltage and Phase | Match the site supply exactly; three phase pumps need a three phase panel and starter. |
| Duty Point | Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point. |
| Sensors | Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them. |
| Explosion Proof | Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record. |
| Lead Time | Made to order: 4-6 weeks after receipt of order. Plan the install date around it. |
Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.
Sign up for our newsletter and be the first to know about coupons and special promotions.
© 2026, Watermainsupply