Zoeller 7013 Grinder Pump - 2 HP

Voltage: 200-208V 1Ph
Build: Standard Build
Part No.: 7013-0005

Product variant with selected options does not exist!

Price
$3,405
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 7013-0005
Weight : 137.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Grinder Pump
Zoeller 7013 Grinder Pump - 2 HP
2 HP · 3450 RPM · single direction, high flow · dual seals
2 HP
3450 RPM
1-1/4 in Discharge
Dual Seals
Explosion Proof Builds
Overview

The Zoeller 7013 is a 2 HP, 3450 RPM 70 Series grinder pump (single direction, high flow) for commercial and municipal pressure sewer service. A hardened 440C stainless steel cutter and disc feed a ductile iron vortex impeller (6.188 in standard), with dual mechanical seals, thermal sensor protection and moisture detection probes.

  • Hardened 440C stainless steel cutter and plate, Rockwell C55-60
  • Epoxy coated cast iron, 304 stainless hardware
  • Upper and lower ball bearings, 416 stainless shaft
  • Single phase units require start capacitors and relay in the control panel
MADE TO ORDER · LEAD TIME 4-6 WEEKS ARO
Zoeller builds each unit to the part number ordered. Lead time runs from receipt of order.
What Ships and What It Needs to Run

Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.

Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: 18 months from date of manufacture, 12 months from date of purchase or 12 months from start-up with a start-up report on file with Zoeller (owner’s manual).
Specifications
Model 7013, 2 HP, service factor 1.2, single direction, high flow
Speed 3450 RPM
Impeller Ductile iron vortex, 6.188 in standard; trim available
Discharge 1-1/4 in NPT vertical or horizontal
Seals Upper carbon/ceramic, lower silicon carbide/carbon; SiC/SiC optional
Cord 20 ft standard; 25 and 50 ft (50 ft not for 200V 1Ph)
Weight 137 lb (1Ph), 132 lb (3Ph)
Full Load Amps 200V 1Ph 20.0 · 230V 1Ph 17.2 · 200V 3Ph 12.3 · 230V 3Ph 10.8 · 460V 5.5
Insulation Class F
Max Water Temperature 130 °F

From Zoeller Engineered Products Tech Data ZM1288 and Zoeller price data.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.

Total head in feet at each flow

Model 0 GPM (Shut-off) 10 GPM 25 GPM 40 GPM 50 GPM
7013 · standard 6.188 in 125 112 93 74 57

Read from Zoeller’s vector performance curve (Zoeller Tech Data ZM1288, 7013 standard impeller) and rounded down to the whole foot. Curve ends: 7013 · standard 6.188 in at 54 GPM. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.

Builds in This Listing

Pick the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.

Before You Buy — The Limits That Decide the Fit
Voltage and Phase Match the site supply exactly; three phase pumps need a three phase panel and starter.
Duty Point Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point.
Sensors Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them.
Explosion Proof Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record.
Lead Time Made to order: 4-6 weeks after receipt of order. Plan the install date around it.
Applications
  • Municipal pressure sewer systems
  • Commercial grinder lift stations
  • Sites where solids and wipes must be reduced before pumping
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like