Menu
Product variant with selected options does not exist!
files/Zoeller_7011-7013-Grinder-Pump_de71ac8f-06ec-41b5-b3c5-b960b4be939f.jpg
07:54 PM
The Zoeller 7011 is a 2 HP, 3450 RPM 70 Series grinder pump (reversing) for commercial and municipal pressure sewer service. A hardened 440C stainless steel cutter and disc feed a ductile iron vortex impeller (5.515 in standard), with dual mechanical seals, thermal sensor protection and moisture detection probes.
Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.
Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.
| Model | 7011, 2 HP, service factor 1.2, reversing |
| Speed | 3450 RPM |
| Impeller | Ductile iron vortex, 5.515 in standard; trim available |
| Discharge | 1-1/4 in NPT vertical or horizontal |
| Seals | Upper carbon/ceramic, lower silicon carbide/carbon; SiC/SiC optional |
| Cord | 20 ft standard; 25 and 50 ft (50 ft not for 200V 1Ph) |
| Weight | 137 lb (1Ph), 132 lb (3Ph) |
| Full Load Amps | 200V 1Ph 20.0 · 230V 1Ph 17.2 · 200V 3Ph 12.3 · 230V 3Ph 10.8 · 460V 5.5 |
| Insulation | Class F |
| Max Water Temperature | 130 °F |
From Zoeller Engineered Products Tech Data ZM1288 and Zoeller price data.
Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.
Total head in feet at each flow
| Model | 0 GPM (Shut-off) | 10 GPM | 20 GPM | 30 GPM | 40 GPM |
|---|---|---|---|---|---|
| 7011 · standard 5.56 in | 104 | 90 | 74 | 60 | 43 |
Read from Zoeller’s vector performance curve (Zoeller Tech Data ZM1288, 7011 standard impeller) and rounded down to the whole foot. Curve ends: 7011 · standard 5.56 in at 45 GPM. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.
Pick the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.
| Voltage and Phase | Match the site supply exactly; three phase pumps need a three phase panel and starter. |
| Duty Point | Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point. |
| Sensors | Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them. |
| Explosion Proof | Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record. |
| Lead Time | Made to order: 4-6 weeks after receipt of order. Plan the install date around it. |
Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.
Sign up for our newsletter and be the first to know about coupons and special promotions.
© 2026, Watermainsupply