Zoeller Model 51 and 142 Centrifugal Effluent Pump - 115V

HP: 0.3 HP
Switch - Cord: Tethered Float - 15 ft Cord
Model - Max: BN51 - 21 ft Max, 18 GPM Max

Product variant with selected options does not exist!

Price
$396
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 51-0006
Weight : 26.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Centrifugal Effluent Pump
Models 51 and 142
0.3 or 1 HP · 115V 1Ph · Septic tank, LPP and STEP service
21-62 ft Max Head · 18 GPM Max
0.3 HP (51) or 1 HP (142)
115V 1Ph
1-1/2 in NPT Discharge
1/2 in Solids
Cast Iron
Automatic (BN) or Nonautomatic (N)
15 ft (51) or 20 ft (142) Cord
27-54 lb Weight
Overview

Models 51 and 142 are Zoeller’s low-flow centrifugal effluent pumps for septic tank, low pressure pipe (LPP) and enhanced-flow STEP systems. The Model 51 suits short lifts to a drain field; the 1 HP Model 142 holds about 18 GPM out to 15 ft and still delivers at 40 ft, for uphill pressure dosing.

Both are cast iron with a corrosion-resistant powder coated finish and pass 1/2 in spherical solids. BN builds carry a tethered float switch with a piggyback plug; N builds run from a separate float or a dosing panel. They are the pumps used in the Zoeller Centrifugal STEP System.

  • Model 51: 0.3 HP, 9.5 FLA
  • Model 142: 1 HP, 13.0 FLA
  • 1-1/2 in NPT discharge
  • Automatic (BN) or nonautomatic (N)
  • 3-wire cord and plug
What Ships and What It Needs to Run

Included: the pump with cord and plug; BN builds include the tethered float switch.

Float or dosing panel required, ordered separately, on N builds.

Effluent screen or vault, check valve and discharge piping: sized at install.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: 12 months from the date of purchase or 18 months from the date of manufacture (Zoeller limited warranty, 51/142/5054 Centrifugal Effluent Series).
Specifications
Horsepower 0.3 HP (51), 1 HP (142)
Voltage 115V 1Ph, 60 Hz
Amps 9.5 A (51), 13.0 A (142)
Discharge 1-1/2 in NPT
Solids Handling 1/2 in spherical
Cord 15 ft (51) or 20 ft (142), 3-wire with plug
Materials Cast iron, powder coated epoxy finish
Weight 27 lb (51), 54 lb (142)
Models & Performance — Will It Do What You Need?
Total head 51, GPM 142, GPM
5 ft 18 18
10 ft 13 18
15 ft 8 18
20 ft 2 17
25 ft — 16
30 ft — 14
40 ft — 7
50 ft — 1
Shut-off head 21 ft 62 ft

GPM at each total head, printed by Zoeller in Technical Data, Centrifugal STEP Systems, CL0031, verbatim. A dash means Zoeller prints no point there; shut-off is the most head the pump makes.

Before You Buy — The Limits That Decide the Fit
Liquid Septic tank effluent, screened
Flow About 18 GPM maximum on both
Lift 51 stops at 21 ft; 142 at 62 ft
Power 115V 1Ph
Control N builds need a float or dosing panel
Installation Notes
  • Nonautomatic pumps: wire to a float switch, piggyback switch or dosing panel
  • Install with a check valve where the discharge runs uphill or to a pressure line
  • Leave room above the pump for the float swing and to lift the pump out
  • In STEP vaults, the vault screens solids so the pump sees filtered effluent

General guidance; follow Zoeller’s installation instructions and local code.

Applications
  • Septic tank effluent pumping
  • Low pressure pipe (LPP) dosing
  • Enhanced-flow STEP systems
  • Media filter dosing
Accessories and Controls
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like