Zoeller Model 371, 372 and 373 Evaporative Cooling Pump

HP - Voltage: 0.3 HP - 115V 1Ph
Model - Max: N371 - 19.25 ft Max, 43 GPM Max

Product variant with selected options does not exist!

Price
$303
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 371-0002
Weight : 21.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Evaporative Cooling Pump
Models 371, 372 and 373
Nonautomatic · 115V or 230V · Evaporative cooler recirculation
19.25-38 ft Max Head · 43-69 GPM Max
0.3-0.4 HP
115V or 230V 1Ph
1-1/2 in NPT Discharge
1/2 in Solids
Cast Iron Housing
Nonautomatic
20 ft Cord
21-37 lb Weight
Overview

Models 371, 372 and 373 are Zoeller’s submersible pumps built for evaporative cooling recirculation and general effluent or dewatering duty. They are nonautomatic: the cooler controls or a float switch start and stop them.

The three models step up in head: the 371 shuts off at 19.25 ft, the 372 at 30 ft and the 373 at 38 ft, with up to 69 GPM. Cast iron cap and housings, an oil-filled motor with auto-reset thermal overload and a non-clogging vortex impeller passing 1/2 in solids.

What Ships and What It Needs to Run

Included: the pump with 20 ft cord.

Start and stop control required: the evaporative cooler control or a float switch; these are nonautomatic pumps.

Discharge piping: sized at install.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: 24 months from the date of purchase or date of manufacture (Zoeller limited warranty, 371/372/373 Cooling Series).
Specifications
Horsepower 0.3 HP (371, 372), 0.4 HP (373)
Voltage 115V or 230V 1Ph, 60 Hz
Amps 3.0 to 9.7 A by model
Operation Nonautomatic
Discharge 1-1/2 in NPT
Solids Handling 1/2 in (13 mm) spherical
Cord 20 ft (6 m), UL listed
Max Liquid Temperature 130 °F (54 °C)
Cooling Oil filled, auto-reset thermal overload
Materials Cast iron cap, motor and pump housing; cast iron or plastic base; engineered plastic impeller
Models & Performance — Will It Do What You Need?
Total head 371, GPM 372, GPM 373, GPM
5 ft 43 50 69
10 ft 34 45 61
15 ft 19 38 53
20 ft — 29 44
25 ft — 16 34
30 ft — — 23
Shut-off head 19.25 ft 30 ft 38 ft

Printed points from Zoeller Technical Data, Models 371, 372 and 373, FM2863, verbatim.

Before You Buy — The Limits That Decide the Fit
Liquid Clear water to 130 °F (54 °C)
Control Nonautomatic: needs cooler control or a float switch
Lift Pick by shut-off: 19.25, 30 or 38 ft
Power 115V or 230V 1Ph
Installation Notes
  • Set the pump level in the cooler reservoir so the intake stays covered when the pads are wet
  • Use the 115V cord on a GFCI-protected outlet sized for the pump amps
  • Flush the reservoir and clean the intake screen at the start of each cooling season
  • Nonautomatic pump: the cooler controls start and stop it

General guidance; follow Zoeller’s installation instructions and local code.

Applications
  • Evaporative cooler recirculation
  • Dewatering
  • Effluent transfer
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like