Zoeller Model 293 Sewage Pump

HP - Voltage: 1 HP - 230V 1Ph
Switch - Cord: Tethered Float - 20 ft Cord
Model - Max: BE293 - 51 ft Max, 122 GPM Max

Product variant with selected options does not exist!

Price
$1,529.25
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 293-0029
Weight : 88.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Sewage Pump
Model 293 Sewage Pump
1 HP · 230V 1Ph · 230V or 460V 3Ph
51 ft Max Head · 122 GPM Max
1 HP
230V 1Ph · 230V or 460V 3Ph
Tethered Float, Vertical Float or No Switch
2 in Solids
2 in NPT Discharge
Vortex Impeller
20, 25, 35 or 50 ft Cord
86-96 lb Ship Weight
Overview

The Zoeller Model 293 Sewage Pump is a 1 HP sewage pump with a 2 in NPT discharge that passes 2 in solids. Printed performance runs from 122 GPM at 15 ft of total head to shut-off at 51 ft. It is listed here in 19 builds: 230V 1Ph · 230V or 460V 3Ph, with 20 to 50 ft cords.

The Model 293 sewage ejector pump is a powerful 1 HP member of Zoeller's High Head Waste-Mate series, engineered for demanding commercial, municipal, and multi-unit residential wastewater applications. Constructed entirely from cast iron-including the motor housing, pump housing, and vortex impeller-the Model 293 is built for rugged environments that require reliable solids handling, thermal durability, and long-term performance.

Which switch fits your pit? Tethered Float builds use Zoeller’s variable level piggyback float, which swings on its cord and lets you set a wider pumping range. Vertical Float builds carry Zoeller’s snap-action float switch on the pump, with fixed on and off levels, and suit narrow pits. No Switch builds are Zoeller’s nonautomatic models: they run from a separate piggyback float or a control panel.

  • Stainless steel screws, handle, and hardware to prevent rust and corrosion
What Ships and What It Needs to Run

Included: the pump with its power cord; Tethered Float and Vertical Float builds ship with that switch.

Float switch or control panel required, ordered separately, on No Switch builds. Zoeller’s nonautomatic models run from an external float switch or a control panel: see the Zoeller Piggyback Pump Switch and the Zoeller Pivot Control Panel.

Motor starter required, ordered separately, on three-phase builds: they run from a control panel with a magnetic starter and overload protection, such as the Zoeller Pivot Pro Control Panel.

Basin, check valve and discharge pipe: sized to the installation and ordered separately.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
1-Year Zoeller Limited Warranty

Zoeller lists a 1-year limited warranty on this product. The start date and conditions are in Zoeller’s published warranty statement.

Specifications
Horsepower 1 HP
Voltage 230V 1Ph · 230V or 460V 3Ph
Shaft Seal Single, Double
Operation Automatic, Nonautomatic
Switch Snap-Action, Piggyback, None
Amps 10.2
RPM 3450
Discharge 2 in NPT
Solids Handling 2 in (50 mm) spherical solids
Impeller Material Cast Iron
Impeller Type Vortex
Cord Length 20, 25, 35, 50 ft
Boxed Size 21-1/4 H x 11-3/4 W x 14-3/4 L in
Shipping Weight 86-96 lb

From Zoeller’s published product specifications. Shipping weight is the boxed weight Zoeller publishes.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) in the left column and read the flow beside it.

Flow in GPM by total dynamic head

Total head Model 293
15 ft 122
20 ft 111
25 ft 99
30 ft 85
35 ft 69
40 ft 51
50 ft 6
Shut-off head 51 ft

Printed points from Zoeller Performance Curve, 290 Series, 009919, verbatim. A dash means the pump does not reach that head. Shut-off head is where flow stops; pick a pump whose shut-off sits well above your total head. The full curve is in the image gallery and on the Data Sheet tab.

Before You Buy — The Limits That Decide the Fit
Liquid and solids Passes 2 in solids.
Lift Flow stops at 51 ft of total head. Size on the flow at your own head, not on the maximum.
Switch Tethered Float; Vertical Float; No Switch. No Switch builds need a float or panel.
Power 230V 1Ph · 230V or 460V 3Ph, 60 Hz. Match the build to the supply at the basin.
Discharge 2 in NPT
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like