Zoeller Model 145 Effluent Pump

HP - Voltage: 3/4 HP - 115V 1Ph
Switch - Cord: Tethered Float - 20 ft Cord
Model - Seal - Max: BN145 Single Seal - 74 ft, 56 GPM Max

Product variant with selected options does not exist!

Price
$692.25
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 145-0005
Weight : 48.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Effluent Pump
Model 145 Effluent Pump
3/4 HP · 115V 1Ph or 230V 1Ph
74 ft Max Head · 56 GPM Max
3/4 HP
115V 1Ph or 230V 1Ph
Tethered Float or No Switch
3/4 in Solids
1-1/2 in NPT Discharge
Single vane Impeller
20, 35 or 50 ft Cord
46-67 lb Ship Weight
Overview

The Zoeller Model 145 Effluent Pump is a 3/4 HP effluent pump with a 1-1/2 in NPT discharge that passes 3/4 in solids. Printed performance runs from 56 GPM at 5 ft of total head to shut-off at 74 ft. It is listed here in 14 builds: 115V 1Ph or 230V 1Ph, with 20 to 50 ft cords.

The 3/4 HP Zoeller Model 145/4145 Series submersible effluent pumps are designed for septic effluent and dewatering applications, including septic tanks, low-pressure pipe systems, and enhanced-flow STEP systems. The oil-filled motor and cast iron motor housing support effective heat dissipation, while the durable cast iron construction and powder-coated epoxy finish help resist corrosion in demanding residential and light commercial installations.

Which switch fits your pit? Tethered Float builds use Zoeller’s variable level piggyback float, which swings on its cord and lets you set a wider pumping range. No Switch builds are Zoeller’s nonautomatic models: they run from a separate piggyback float or a control panel.

  • Durable cast iron construction
  • Stainless steel hardware
  • Automatic motor protection
What Ships and What It Needs to Run

Included: the pump with its power cord; Tethered Float builds ship with that switch.

Float switch or control panel required, ordered separately, on No Switch builds. Zoeller’s nonautomatic models run from an external float switch or a control panel: see the Zoeller Piggyback Pump Switch and the Zoeller Pivot Control Panel.

Basin, check valve and discharge pipe: sized to the installation and ordered separately.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
1-Year Zoeller Limited Warranty

Zoeller lists a 1-year limited warranty on this product. The start date and conditions are in Zoeller’s published warranty statement.

Specifications
Horsepower 3/4 HP
Voltage 115V 1Ph or 230V 1Ph
Shaft Seal Single, Double
Operation Automatic, Nonautomatic
Switch Piggyback, None
Amps 13.0
RPM 3450
Discharge 1-1/2 in NPT
Solids Handling 3/4 in (19 mm) spherical solids
Impeller Material Engineered Plastic
Impeller Type Single vane
Cord Length 20, 35, 50 ft
Shipping Weight 46-67 lb

From Zoeller’s published product specifications. Shipping weight is the boxed weight Zoeller publishes.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) in the left column and read the flow beside it.

Flow in GPM by total dynamic head

Total head Model 145
5 ft 56
10 ft 55
15 ft 53
20 ft 51
25 ft 48
30 ft 45
40 ft 35
50 ft 26
60 ft 16
Shut-off head 74 ft

Printed points from Zoeller Technical Data, 140/4140, 145/4145, FM2783, verbatim. A dash means the pump does not reach that head. Shut-off head is where flow stops; pick a pump whose shut-off sits well above your total head. The full curve is in the image gallery and on the Data Sheet tab.

Before You Buy — The Limits That Decide the Fit
Liquid and solids Passes 3/4 in solids.
Lift Flow stops at 74 ft of total head. Size on the flow at your own head, not on the maximum.
Switch Tethered Float; No Switch. No Switch builds need a float or panel.
Power 115V 1Ph or 230V 1Ph, 60 Hz. Match the build to the supply at the basin.
Discharge 1-1/2 in NPT
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like