Menu
Product variant with selected options does not exist!
files/Zoeller_137-0001_fb295918-a1c9-4ceb-831f-8173bbf6af28.jpg
07:53 PM
The Zoeller Model 137 Submersible Sump Pump is a 1/2 HP sump pump with a 1-1/2 in NPT discharge that passes 5/8 in solids. At 10 ft of total head it moves 75 GPM, and flow stops at 26 ft (shut-off head). It is listed here in 33 builds: 115V, 200-208V or 230V 1Ph · 200-208V, 230V or 460V 3Ph, with 10 to 35 ft cords.
Powered by a 1/2 HP split-phase motor, each Model 137 pump features an oil-filled motor chamber and finned cast-iron motor housing to ensure optimal heat dissipation, allowing the pump to operate efficiently during extended or continuous-duty cycles. Designed to handle the demands of residential and light commercial basement and septic systems, these pumps combine Zoeller's proven hydraulic design with durable construction for long service life.
Which switch fits your pit? Tethered Float builds use Zoeller’s variable level piggyback float, which swings on its cord and lets you set a wider pumping range. Vertical Float builds carry Zoeller’s snap-action float switch on the pump, with fixed on and off levels, and suit narrow pits. No Switch builds are Zoeller’s nonautomatic models: they run from a separate piggyback float or a control panel.
Included: the pump with its power cord; Tethered Float and Vertical Float builds ship with that switch.
Float switch or control panel required, ordered separately, on No Switch builds. Zoeller’s nonautomatic models run from an external float switch or a control panel: see the Zoeller Piggyback Pump Switch and the Zoeller Pivot Control Panel.
Motor starter required, ordered separately, on three-phase builds: they run from a control panel with a magnetic starter and overload protection, such as the Zoeller Pivot Pro Control Panel.
Basin, check valve and discharge pipe: sized to the installation and ordered separately.
Zoeller lists a 3-year limited warranty on this product. The start date and conditions are in Zoeller’s published warranty statement.
| Horsepower | 1/2 HP |
| Voltage | 115V, 200-208V or 230V 1Ph · 200-208V, 230V or 460V 3Ph |
| Operation | Automatic, Nonautomatic |
| Switch | Snap-Action, Piggyback, None |
| Amps | 2.0 - 9.4 |
| RPM | 1725 |
| Discharge | 1-1/2 in NPT |
| Solids Handling | 5/8 in (15 mm) spherical solids |
| On/Off Points | 10 in (25.4 cm) / 2-3/4 in (7 cm) |
| Impeller Material | Cast Iron |
| Impeller Type | Vortex |
| Cord Length | 10, 15, 25, 35 ft |
| Boxed Size | 13-3/4 H x 11 W x 11 L in |
| Shipping Weight | 46-55 lb |
From Zoeller’s published product specifications. Shipping weight is the boxed weight Zoeller publishes.
Find your total dynamic head (vertical lift plus pipe friction) in the left column and read the flow beside it.
Flow in GPM by total dynamic head
| Total head | Model 137 |
|---|---|
| 5 ft | 90 |
| 10 ft | 75 |
| 15 ft | 58 |
| 20 ft | 36 |
| 25 ft | 8 |
| Shut-off head | 26 ft |
Printed points from Zoeller Technical Data, 130 Series, FM2782, verbatim. A dash means the pump does not reach that head. Shut-off head is where flow stops; pick a pump whose shut-off sits well above your total head. The full curve is in the image gallery and on the Data Sheet tab.
| Liquid and solids | Passes 5/8 in solids. |
| Lift | Flow stops at 26 ft of total head. Size on the flow at your own head, not on the maximum. |
| Switch | Tethered Float; Vertical Float; No Switch. No Switch builds need a float or panel. |
| On and off levels | 10 in (25.4 cm) / 2-3/4 in (7 cm) |
| Power | 115V, 200-208V or 230V 1Ph · 200-208V, 230V or 460V 3Ph, 60 Hz. Match the build to the supply at the basin. |
| Discharge | 1-1/2 in NPT |
Zoeller parts commonly ordered with this pump.
Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.
Sign up for our newsletter and be the first to know about coupons and special promotions.
© 2026, Watermainsupply