Zoeller 72 HD Series Grinder Pump

HP - Voltage: 10 HP - 200-208V 3Ph
Build: 3 in Disch
Part No.: 7212-0012

Product variant with selected options does not exist!

Price
$14,196
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 7212-0012
Weight : 425.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Grinder Pump
Zoeller 72 HD Series Grinder Pump
Models 7212 and 7213 · 10 and 15 HP · 3450 RPM · 3 in or 4 in flange
10 or 15 HP
3450 RPM
3 in or 4 in Flange
Tandem Seals
3 Phase
Overview

The 72 HD Series are Zoeller Engineered Products’ largest grinder pumps: 10 HP (7212) and 15 HP (7213), 3450 RPM three phase motors with a ductile iron vortex impeller, tandem mechanical seals and a 3 in or 4 in horizontal flanged discharge, built for high head municipal pressure sewer and lift station service.

  • Hardened 440C stainless steel cutter and plate, Rockwell C55-60
  • Epoxy coated cast iron, 304 stainless hardware
  • Upper and lower ball bearings, 416 stainless shaft
MADE TO ORDER · LEAD TIME 4-6 WEEKS ARO
Zoeller builds each unit to the part number ordered. Lead time runs from receipt of order.
What Ships and What It Needs to Run

Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.

Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: one year from date of purchase by the end user, or 18 months from date of original manufacture, whichever comes first (Zoeller owner’s manual).
Specifications
Models 7212 (10 HP), 7213 (15 HP)
Speed 3450 RPM
Impeller Ductile iron vortex
Discharge 3 in or 4 in horizontal flange (ANSI B16.1)
Seals Tandem: upper carbon/ceramic, lower silicon carbide/silicon carbide
Cord 25 ft standard, SOOW sized by amps
Weight 475 lb
Full Load Amps 7212: 200V 48.3, 230V 42, 460V 21, 575V 17 · 7213: 62.1, 54, 27, 22
Sensing Thermal sensors and moisture probes (panel circuit required)
Max Water Temperature 104 °F

From Zoeller Engineered Products Tech Data ZM3316 and Zoeller price data.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.

Total head in feet at each flow

Model 0 GPM (Shut-off) 25 GPM 70 GPM 100 GPM 135 GPM
7212 · 10 HP 211 200 178 162 138
7213 · 15 HP 256 242 214 193 165

Read from Zoeller’s vector performance curve (Zoeller Engineered Tech Data ZM3316) and rounded down to the whole foot. Curve ends: 7212 at 150 GPM; 7213 at 150 GPM. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.

Builds in This Listing

Pick the model, then the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.

Before You Buy — The Limits That Decide the Fit
Voltage and Phase Match the site supply exactly; three phase pumps need a three phase panel and starter.
Duty Point Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point.
Sensors Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them.
Explosion Proof Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record.
Lead Time Made to order: 4-6 weeks after receipt of order. Plan the install date around it.
Applications
  • Municipal pressure sewer systems
  • Commercial grinder lift stations
  • Sites where solids and wipes must be reduced before pumping
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like