Zoeller 7008 and 7010 Grinder Pump

HP - Voltage: 1 HP - 115V 1Ph
Build: Standard Build
Part No.: 7008-0002

Product variant with selected options does not exist!

Price
$2,144
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 7008-0002
Weight : 88.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Zoeller · Grinder Pump
Zoeller 7008 and 7010 Grinder Pump
1 and 2 HP · 3450 RPM · 1-1/4 in discharge · tri-slice cutter
1 or 2 HP
3450 RPM
1-1/4 in Discharge
440C Cutter
Single Phase
Overview

The Zoeller 7008 (1 HP) and 7010 (2 HP) are single phase commercial grinder pumps for pressure sewer and lift station service. A hardened 440C stainless cutter macerates sewage ahead of an engineered plastic vortex impeller and discharges through a 1-1/4 in vertical or horizontal connection. The 7008 shuts off at 53 ft and the 7010 at 107 ft.

WDH7010 builds include an integral float switch for automatic operation.

  • Hardened 440C stainless steel cutter and plate, Rockwell C55-60
  • Epoxy coated cast iron, 304 stainless hardware
  • Upper and lower ball bearings, 416 stainless shaft
MADE TO ORDER · LEAD TIME 4-6 WEEKS ARO
Zoeller builds each unit to the part number ordered. Lead time runs from receipt of order.
What Ships and What It Needs to Run

Included: the Zoeller pump built to the part number selected, with the cord length and options in that build.

Needs to run: a control panel matched to the pump voltage, phase and full load amps; three phase builds and builds with thermal or moisture sensors need panel circuits for those sensors. Zoeller Pivot panels and our team can match one to the pump.

Genuine Zoeller equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Zoeller Distributor.
Warranty: 18 months from date of manufacture, 12 months from date of purchase or 12 months from start-up with a start-up report on file with Zoeller (owner’s manual).
Specifications
Models 7008 (1 HP, 4.25 in impeller), 7010 (2 HP, 5.825 in impeller)
Speed 3450 RPM
Shut-Off Head 7008: 53 ft · 7010: 107 ft
Discharge 1-1/4 in vertical or horizontal
Seal Silicon carbide/carbon (SiC/SiC optional)
Cord 20 ft standard; 25, 35, 50 ft optional; 14 ga SOOW
Weight 88 lb
Full Load Amps 7008: 115V 13.6, 200-230V 9.9 · 7010: 200-230V 14.5
Start Components Internal standard; external (in panel) optional
Max Water Temperature 130 °F

From Zoeller Engineered Products Tech Data ZM2392 and Zoeller price data.

Models & Performance — Will It Do What You Need?

Find your total dynamic head (vertical lift plus pipe friction) and read across to the flow you need. Each row is a standard impeller; the build you select may carry a trimmed impeller sized to a design point.

Total head in feet at each flow

Model 0 GPM (Shut-off) 10 GPM 20 GPM 30 GPM 40 GPM
7008 53 45 37 28 15
7010 107 97 87 77 64

Read from Zoeller’s vector performance curve (Zoeller curve 154108 (Tech Data ZM2392)) and rounded down to the whole foot. Curve ends: 7008 at 43 GPM; 7010 at 46 GPM. Trimmed impellers and the full curves are on the curve images and the Data Sheet tab; a trimmed build delivers less head than the standard impeller shown.

Builds in This Listing

Pick the model, then the voltage, then the build: each build names the cord length, discharge, seals, sensors and impeller trim that Zoeller assembles for that part number.

Before You Buy — The Limits That Decide the Fit
Voltage and Phase Match the site supply exactly; three phase pumps need a three phase panel and starter.
Duty Point Check the flow and total dynamic head against the performance curve (images and Data Sheet tab). Trimmed impeller builds are cut to a specific duty point.
Sensors Thermal and moisture sensors only protect the pump when the control panel has circuits wired for them.
Explosion Proof Explosion proof builds are for classified hazardous locations; confirm the area classification with the engineer of record.
Lead Time Made to order: 4-6 weeks after receipt of order. Plan the install date around it.
Applications
  • Municipal pressure sewer systems
  • Commercial grinder lift stations
  • Sites where solids and wipes must be reduced before pumping
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036. © Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like