GRUNDFOS · DRIVE OUTPUT FILTER
TCI Sine-Wave Filter
TCI sine-wave output filters supplied under Grundfos part numbers for SP and SPE submersible pumps on CUE drives, 9 to 110 A, 3 to 50 HP.
9 to 110 A
3 to 50 HP SP motors
Supplied by Grundfos
Manufactured by TCI
Overview
Grundfos lists TCI sine-wave filters for 6 in 90S through 1100S SPE permanent-magnet submersible pumps and other SP pumps run on CUE variable-frequency drives. The filter conditions the drive output for the motor cable and submersible motor. Grundfos rates each filter by amps and by the SP pump horsepower it serves.
The filters are manufactured by TCI and sold through Grundfos under the Grundfos material numbers below.
What Ships and What It Needs to Run
Included: one TCI sine-wave output filter at the amp rating you select, supplied under its Grundfos part number.
Required: a Grundfos CUE drive (Grundfos CUE Variable Frequency Drive or Grundfos CUE IP66 Variable Frequency Drive) feeding an SP or SPE submersible motor. Select the filter by the motor's service-factor amps, not by horsepower.
Wiring: the filter mounts between the drive output and the motor drop cable, ordered and installed separately.
Genuine Grundfos equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
Warranty
TCI manufactures this filter and Grundfos supplies it under its own part number. Grundfos's terms state that products sold but not manufactured by Grundfos carry the warranty of their manufacturer; we confirm the TCI terms with your order.
Models & Part Numbers
| Filter amps |
SP pump rated HP |
Ship weight |
Part No. |
| 9 A |
3 |
57 lb |
92617568 |
| 12 A |
5 |
58 lb |
92617569 |
| 16 A |
7-1/2 |
58 lb |
92617580 |
| 23 A |
10 |
75 lb |
92617581 |
| 30 A |
15 |
75 lb |
92617582 |
| 35 A |
20 |
75 lb |
92617583 |
| 45 A |
25 |
90 lb |
92617587 |
| 55 A |
30 |
105 lb |
92617588 |
| 65 A |
40 |
144 lb |
92617589 |
| 80 A |
50 |
162 lb |
92617590 |
| 110 A |
50 |
177 lb |
92617591 |
Two filters are listed for 50 HP; the 110 A unit covers the higher-current 50 HP motors. Select by the motor's service-factor current.
Before You OrderConfirm supply voltage, motor service-factor amps, drive part number and motor cable length. Filter amps, not horsepower, decide the selection.
