A.Y. McDonald Jet Pump Motor - NEMA C, 3/4-1.5 HP

HP - Voltage: 3/4 HP - 230/115V 1Ph
Part No.: 6127-154

Product variant with selected options does not exist!

MAP
Price
$650.74
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 6127-154
Weight : 19.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
A.Y. McDonald · Jet Pump Motor
NEMA C Jet Pump Motor
Replacement keyed-shaft motors for 1500 Series jet pumps, 3/4 to 1 1/2 HP.
Overview

The 1500 Series jet pumps use the NEMA C keyed shaft motor: single phase, open drip proof, capacitor start. The carbon steel shaft is not in contact with the water.

The motor includes a run capacitor for higher efficiency and ships wired for 230V; a voltage change device lets it run on 115V.

Key Features

  • Carbon steel shaft, 0.625 in diameter x 2.07 in long from the face
  • Ball bearings with a locked drive end bearing
  • Continuous duty at 104°F ambient, 60 Hz
  • Automatic reset thermal overload protector
  • Round frame, NEMA 56C mounting; power leads and ground wire supplied
What Ships and What It Needs to Run

Included: the motor, with power leads and ground wire for connection to the pressure switch.

Fits: 1500 Series multi-stage jet pumps of the same horsepower.

Genuine A.Y. McDonald equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier. Watermain Supply is an Authorized Stocking A.Y. McDonald and Baker Water Systems Distributor.
A.Y. McDonald Limited Warranty

Covered for 2 years from the date of manufacture or 1 year from the date of installation, whichever comes first, under A.Y. McDonald’s standard limited warranty for Baker products.

Models & Fit
Part No. HP - Voltage Weight
6127-154 3/4 HP - 230/115V 1Ph 19.0 lb
6127-160 1 HP - 230/115V 1Ph 22.0 lb
6127-156 1 1/2 HP - 230/115V 1Ph 26.0 lb
Nema C Motor
For 1500 Series Jet Pumps (Single Phase, ODP, Keyed Shaft, Capacitor Start)
Two Compartment Products | E-Z Access
Part No. HP RPM Frame Catalog Volt Type Service Factor SF* Amps MTR Lgth (1) Ship Wt. Factory Wired
6127-154 3/4 3500 48/56 230/115 FHP 1.5 7.4/14.8 9.5 in 21 230V
6127-160 1 3500 48/56 230/115 FHP 1.65 9.0/18.0 10 in 24 230V
6127-156 1 1/2 3500 48/56 230/115 FHP 1.3 10.7/21.4 10.5 in 28 230V
*Service Factor Amps may vary with motor manufacturer - refer to label on motor
*Includes run capacitor for higher efficiency
(1) Length not including shaft
(2) Contact factory for three phase and/or TEFC motors

Carbon steel shaft (not in contact with water)

Shaft 0.625 in diameter x 2.07 in long from face

Ball bearings (locked drive end bearing)

Continuous duty at 40°C/104°F ambient, 60Hz

Automatic reset thermal overload protector

Round frame (without base), Nema 56C mounting

Power leads and ground wire supplied

Voltage change device included

Factory wired 230V

Frame: 48/56 | Voltage: 230/115

Motor data from the Pumps by Baker catalog (Sept 2025), p. 226.

Before You Order

Match the horsepower on the pump nameplate. The motor ships wired for 230V; change the voltage setting before connecting to 115V. For three phase or TEFC motors, contact us.

For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like