Smith-Blair · Wide-Range Cast Coupling
Style 461 Quantum Wide-Range Coupling
Cast Ductile Iron, Epoxy-Coated Alloy Bolts
250 PSI Max Working Pressure
-20°F to +180°F Temperature
Nitrile (Buna-N) Gasket
Epoxy-Coated Ductile Iron Sleeve and Followers
Low-Alloy Steel Bolts, Coated Nuts
NSF/ANSI 61 and 372
AWWA C219
1.81-14.40 in Pipe OD
8.2-89 lb Weight
Description
The Smith-Blair Style 461 Quantum is a wide-range cast coupling that joins plain-end pipe of any outside diameter within its range — up to 1.65 in of OD range on a single gasket and follower, so one coupling covers each nominal size. It stab-fits with no disassembly, and its heavy cast ductile iron sleeve and followers carry a Flexi-Coat fusion-bonded epoxy finish.
This build carries high-strength low-alloy steel bolts with epoxy-coated threads and fluoropolymer-coated nuts to prevent galling. Sleeve length is set by pipe size (4 to 7.5 in) and shows in Option 2.
Application: joining plain-end pipe of different outside diameters within the same nominal size, and replacing split or excessively damaged pipe.
Key Features
- Working pressure up to 250 PSI
- One coupling per nominal size: up to 1.65 in of OD range with a single gasket and follower
- Stab fit — installs with no disassembly
- Followers marked with part number and pipe range, with an integral bolt-head pocket for one-wrench installation
- Certified to NSF/ANSI 61 and NSF/ANSI 372
What Ships and What It Needs to Run
Included: the coupling with its sleeve, two followers, Nitrile gaskets, bolts, nuts and washers, ready for stab fit.
Pipe stiffeners on HDPE, ordered separately. Smith-Blair requires pipe stiffeners when the 461 is used on HDPE pipe; ask us to include them.
Genuine Smith-Blair equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month Smith-Blair Warranty
Smith-Blair warrants its products to be free of defects in materials and workmanship for one year from the date of shipment by Smith-Blair. Dated proof of purchase, such as a bill of sale, is required to establish eligibility. Smith-Blair will repair or, at its option, replace a defective product; the product is returned to the factory or warehouse Smith-Blair designates.
Working Pressure
Up to 250 PSI across every size, 1-1/2 through 12 in, per the Smith-Blair datasheet and spec. The coupling seals but does not restrain, so the line must be anchored to hold that pressure.
Materials Specifications
| Sleeve |
Cast ductile iron, ASTM A536 Gr 65-45-12 or 80-55-06 |
| Followers (flanges) |
Cast ductile iron, ASTM A536 Gr 65-45-12, marked with part number and pipe range |
| Gasket |
Nitrile (Buna-N) per ASTM D2000, NSF 61 approved; resists water, oil, natural gas, acids, alkalies and most (aliphatic) hydrocarbons; ribbed leading edge |
| Finish |
Flexi-Coat fusion-bonded epoxy, meets AWWA C213 |
| Bolts |
High-strength low-alloy steel per AWWA C111/A21.11, oval-neck track head, epoxy-coated threads to prevent galling |
| Nuts |
Heavy hex HSLA steel per AWWA C111/A21.11, fluoropolymer-coated to prevent galling |
| Washers |
Carbon steel per ASTM F844, Fe/Zn coated |
Materials subject to change by the manufacturer.
Pipe Applications
Carbon steel, stainless steel, ductile iron, cast iron, asbestos cement and PVC. On HDPE, Smith-Blair requires pipe stiffeners; for other pipe materials, ask us to confirm with Smith-Blair Engineering.
Sizes
| Pipe size and OD |
Sleeve Length |
| 1-1/2 in - 1.81-2.28 in OD |
4 in Sleeve |
| 2 in - 2.34-2.85 in OD |
4 in Sleeve |
| 2-1/2 in - 2.84-3.35 in OD |
4 in Sleeve |
| 3 in - 3.46-4.21 in OD |
5 in Sleeve |
| 4 in - 4.46-5.60 in OD |
5-1/2 in Sleeve |
| 6 in - 6.54-7.65 in OD |
6 in Sleeve |
| 8 in - 8.54-9.85 in OD |
6 in Sleeve |
| 10 in - 10.65-12.20 in OD |
7-1/2 in Sleeve |
| 12 in - 12.75-14.40 in OD |
7-1/2 in Sleeve |
Choose the size in the first option; the part number shows in the last option.
Sleeve and Bolts
| Nominal size |
Sleeve length |
5/8 in bolts |
| 1-1/2 to 2-1/2 in |
4 in |
2 |
| 3 in |
5 in |
4 |
| 4 in |
5.5 in |
4 |
| 6 and 8 in |
6 in |
4 |
| 10 and 12 in |
7.5 in |
8 |
Bolts 10.50 in long through 8 in and 13.50 in long at 10 and 12 in; laying length 10.5 in and 13.5 in.
Pipe Gap by Sleeve Length
| Sleeve length |
Straight run |
Deflected |
Max gap |
| 4 in |
1/2 in |
3/4 in |
1-1/2 in |
| 5 to 6 in |
1/2 in |
1 in |
2 in |
| 7-1/2 in |
1 in |
1-1/2 in |
3 in |
Center the pipe gap in the sleeve. Max deflection 3° pipe to pipe, 1-1/2° pipe to sleeve; total axial movement 1/8 in at 1-1/2 to 2 in, 1/4 in at 2-1/2 to 10 in, 3/8 in at 12 in.
Installation Notes
- Stab fit: the 461 goes on without disassembly.
- Clean the pipe ends where the gaskets will seat.
- Lubricate the pipe and gaskets with a soap-and-water solution (anti-freeze may be required) that meets the water and pipe supplier's requirements; the beveled gasket edge faces the pipe end.
- Center the sleeve over the pipe gap, keeping the gap within the table above.
- Tighten the nuts gradually, alternating between opposite sides so the followers stay parallel, to the torque in the instructions; recheck the torque after the line is pressurized.
- Anchor the pipe: the coupling seals around it, and Smith-Blair requires proper anchoring to restrain pipe movement and prevent pull-out.
From Smith-Blair Installation Instructions TI-017 (Rev 08/26/21), in the Data Sheet tab.
Before You OrderAll Smith-Blair products are Made to Order and Non-Returnable.
Items typically shipped in 5 - 10 business days.
304 and 316 stainless hardware, other gaskets (Viton, EPDM), protected gaskets, anode connectors and insulating boots are built to order — email sales@watermainsupply.com with the pipe OD and material.