Barnes STEP-SS STEP Effluent Pump

HP - Voltage: 1/2 HP - 120V 1Ph
Model - Max: STEP512SS - 78 ft Max, 79 GPM Max

Product variant with selected options does not exist!

Price
$1,976
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 105045
Weight : 52.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Barnes · STEP Effluent Pump
STEP-SS
5 builds of the STEP-SS step effluent pump, 1/2 HP, 78 ft shut-off head and 79 GPM at the end of the published curve.
78 ft Max Head · 79 GPM Max
1/2 HP
120V 1Ph · 240V 1Ph · 200-240V 3Ph +
No Switch
4 in Solids
2 in NPT Discharge
Cast Iron Construction
Overview

Effluent pumps are designed for handling dirty water in typical septic tank and effluent applications. High temperature models are available. Barnes effluent pumps are designed to handle most low and high head effluent applications.

  • Cast iron Construction
  • Stainless Steel Shaft
  • Ball Bearing Construction
  • Quick Connect Cords on Select Models
  • CSA Listed
What Ships and What It Needs to Run

Included: The pump.

Control panel required, ordered separately. Crane’s technical data calls for motor overload protection in the control panel; the temperature sensors wire in series with the control circuit.

Level control for No Switch builds, ordered separately. A piggyback float such as the Barnes piggyback control float switch or a control panel with floats starts and stops the pump.

Basin, check valve and discharge pipe: sized to your installation and ordered separately.

Genuine Barnes equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
24-Month Barnes Warranty

This pump is covered for 24 months from the date of shipment from Crane Pumps & Systems under Crane’s published Standard Terms and Conditions of Sale (revised 03/11/2026).

Specifications
Horsepower 1/2 HP
Voltage 120V 1Ph, 240V 1Ph, 200-240V 3Ph, 480V 3Ph
Solids handling 4 in spherical solids
Discharge 2 in NPT, Female, vertical
Motor NEMA L -Single Phase, NEMA B -Three Phase Torque Curve, Oil Filled, Squirrel Cage Induction; Class B insulation
Single phase Permanent Split Capacitor (PSC)
Three phase 200-240/480 is Tri-voltage. 600V. Requires overload protection to be included in control panel
Seal Single mechanical
Upper bearing Single Row, Ball, Oil lubricated
Lower bearing Single Row, Ball, Oil lubricated
Cord entry 20 ft. (6.1m) Cord with plug on 120 volt & 240 volt, 1 phase. Quick connect custom
Level control "A" - Wide angle, PVC, mechanical, pipe mounted, 20 ft. (6.1m) cord with piggy-back plug
Models & Performance — Will It Do What You Need?

Find your total head — the vertical lift from the pump to the discharge point plus friction in the pipe — and read across. The full curve is in the image gallery.

Models

Model Voltage FLA
STEP512SS 120V 1Ph 11.9
STEP512SSA 120V 1Ph 11.9
STEP522SS 240V 1Ph 5.1
STEP592SS 200-240V 3Ph 4.5/4.5
STEP542SS 480V 3Ph 2.2

Total head in feet at three flows

HP 0 GPM (Shut-off) 15 GPM 39 GPM 59 GPM 79 GPM (Max)
1/2 HP 78 ft 67 ft 47 ft 27 ft 4 ft

Read from the published curve image in Crane Pumps & Systems’ online Barnes catalog (model page STEP-SS – .5HP) for the 117 mm (4.62 in) standard impeller, digitized and rounded down, at the digitized points nearest 20%, 50% and 75% of the curve’s 79 GPM end. Crane prints no performance table for this pump, so the values are checked against the curve and the series maximums only. Bold = the last point on the curve, its max flow.

Before You Buy — The Limits That Decide the Fit
Solids Passes 4 in spherical solids
Liquid temperature 104°F (40°C) Continuous
Not for Swimming pools, recreational water parks or installations where people commonly contact the pumped liquid (Crane note)
Applications

Septic Systems, Industrial wastewater, Reclaimed water systems and Grewater.

Materials of Construction
Volute Cast iron ASTM A-48, class 30
Impeller Polypropylene with stainless steel insert
Motor housing Cast iron ASTM A-48, class 30
Seal plate Cast iron ASTM A-48, class 30
Shaft 416 Stainless steel
Accessories
Accessory Code Description
Barnes Ball Check Valve 6 part numbers Cast Iron Ball Check Valve
Barnes Piggyback Control Float Switch 6 part numbers Control Float 240V
Barnes Lifting Rope 093973 Lifting Rope
Barnes PVC Swing Check Valve 3 part numbers Swing Check Valve
Barnes Fiberglass Basin 81 part numbers Fiberglass Basin
Barnes Pump Control Panel 23 part numbers Control Panel, Single Phase
Barnes Flexible Discharge Couplings 5 part numbers Flexible Discharge Couplings
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like