Barnes SE-HT Sewage Ejector Pump

HP - Voltage: 0.4 HP - 115V 1Ph
Model - Max: SE411HT - 19 ft Max, 93 GPM Max

Product variant with selected options does not exist!

Price
$1,611.37
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 096764
Weight : 53.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Barnes · Sewage Ejector Pump
SE-HT
3 builds of the SE-HT sewage ejector pump, 0.4 HP, 19 ft shut-off head and 93 GPM at the end of the published curve.
19 ft Max Head · 93 GPM Max
0.4 HP
115V 1Ph · 230V 1Ph
No Switch
2 in Solids
2 in NPT Discharge
Cast Iron Construction
53-55 lb Weight
Overview

Sewage Ejector pumps are found in a variety of applications, specifically those dealing with sewage, effluent, wastewater processing, and media laden with solids. These pumps play a crucial role in the seamless movement of sewage and effluent through treatment plants, where their robust design ensures effective pumping and processing of potentially harmful substances.

  • Oil Lubricated Bearings
  • Single Phase Overload Protection
  • Stainless Steel Hardware
  • Dual Vane and Vortex Impeller Options
What Ships and What It Needs to Run

Included: The pump.

Level control for No Switch builds, ordered separately. A piggyback float such as the Barnes piggyback control float switch or a control panel with floats starts and stops the pump.

Basin, valves and alarm: a sealed, vented basin and lid, check and shutoff valves and a high-water alarm are sized to your installation and ordered separately.

Genuine Barnes equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
24-Month Barnes Warranty

This pump is covered for 24 months from the date of shipment from Crane Pumps & Systems under Crane’s published Standard Terms and Conditions of Sale (revised 03/11/2026).

Specifications
Horsepower 0.4 HP
Voltage 115V 1Ph, 230V 1Ph
Solids handling 2 in spherical solids
Discharge 2 in NPT, Female, vertical
Speed 1750 RPM (Nominal)
Motor NEMA L torque curve, oil filled, squirrel cage induction; Class F insulation
Single phase Permanent split capacitor (PSC) includes overload protection in motor
Upper bearing Single row, ball
Lower bearing Single row, ball
Cord entry 15 ft. (5m) Quick disconnect cord with plug On 115 volt, pressure grommet for sealing and strain relief
Level control "A" - Wide angle, PVC, mechanical, 15 ft (5m) cord with piggy-back plug, N/O "AU"- Wide angle, polypropylene, mechanical, N/O, integral to pump. ON and OFF points are adjustable
Models & Performance — Will It Do What You Need?

Find your total head — the vertical lift from the pump to the discharge point plus friction in the pipe — and read across. The full curve is in the image gallery.

Models

Model Voltage FLA
SE411HT 115V 1Ph 10.0
SE411HTA 115V 1Ph 10.0
SE421HT 230V 1Ph 4.0

Total head in feet at three flows

HP 0 GPM (Shut-off) 18 GPM 46 GPM 69 GPM 93 GPM (Max)
0.4 HP 19 ft 17 ft 14 ft 12 ft 9 ft

Read from the published curve image in Crane Pumps & Systems’ online Barnes catalog (model page SE-HT – .4HP) for the 114 mm (4.5 in) standard impeller, digitized and rounded down, at the digitized points nearest 20%, 50% and 75% of the curve’s 93 GPM end. Crane prints no performance table for this pump, so the values are checked against the curve and the series maximums only. Bold = the last point on the curve, its max flow.

Before You Buy — The Limits That Decide the Fit
Solids Passes 2 in spherical solids
Liquid temperature 200°F (93°C) Continuous
Not for Swimming pools, recreational water parks or installations where people commonly contact the pumped liquid (Crane note)
High-temperature service Use a high-temperature wide-angle level control (Crane note)
Applications

Sewage water, Residential wastewater, Light commercial wastewater and Storm water.

Materials of Construction
Volute Cast iron ASTM A-48, class 30
Impeller Cast iron ASTM A-48, class 30
Motor housing Cast iron ASTM A-48, class 30
Seal plate Cast iron ASTM A-48, class 30
Shaft 416 Stainless steel
Accessories
Accessory Code Description
Barnes Level Control 10 part numbers High Temperature Level Controls
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like