Barnes · Submersible Sump and Effluent Pump
EP72X
2 builds of the EP72X submersible sump and effluent pump, 3/4 HP, 30 ft shut-off head and 90 GPM at the end of the published curve.
30 ft Max Head · 90 GPM Max
3/4 HP
240V 1Ph
No Switch or Wide-Angle Float
4 in Solids
1-1/2 in NPT Discharge
Cast Iron Motor, Thermoplastic Volute
20 ft Cord
36 lb Weight
Overview
Barnes sump pumps are robustly designed for long operational life, quiet operation, and dependable service. They are ideal for dirty water applications with minimal solids, and are available with or without integral level controls and in a variety of construction materials. Barnes sump pumps are also available in various package systems for installation flexibility.
- Permanent Split Capacitor Motor
- Oil Lubricated Ball Bearings
- Top Suction Volute on Expel Series
- Single Piece Motor Housing and Volute on SP/EP Series
- Cast Iron Vortex Impeller on SP/EP Series
What Ships and What It Needs to Run
Included: The pump with its 20 ft power cord, by model; float-switch builds ship with the level control named in the Switch option.
Level control for No Switch builds, ordered separately. A piggyback float such as the Barnes piggyback control float switch or a control panel with floats starts and stops the pump.
Basin, check valve and discharge pipe: sized to your installation and ordered separately.
Genuine Barnes equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
24-Month Barnes Warranty
This pump is covered for 24 months from the date of shipment from Crane Pumps & Systems under Crane’s published Standard Terms and Conditions of Sale (revised 03/11/2026).
Specifications
| Horsepower |
3/4 HP |
| Voltage |
240V 1Ph |
| Solids handling |
4 in spherical solids |
| Discharge |
1½ in NPT, Female, vertical |
| Motor |
Oil filled; Class B insulation |
| Single phase |
Permanent Split Capacitor (PSC). Includes thermal overload protection in motor |
| Seal |
Single mechanical, type 21 |
| Upper bearing |
Single row, ball, oil lubricated |
| Lower bearing |
Single row, ball, oil lubricated |
| Cord entry |
20 ft. (6m) Quick connect cord with plug and pressure grommet for sealing and strain relief |
| Level control |
EP72X: None EP72AX: Wide angle, mechanical, 20 ft. (6m) cord with Piggy-Back plug |
Models & Performance — Will It Do What You Need?
Find your total head — the vertical lift from the pump to the discharge point plus friction in the pipe — and read across. The full curve is in the image gallery.
Models
| Model |
Switch |
| EP72X |
No Switch |
| EP72AX |
Wide-Angle Float - Piggyback |
Total head in feet at three flows
| HP |
0 GPM (Shut-off) |
17 GPM |
45 GPM |
67 GPM |
90 GPM (Max) |
| 3/4 HP |
30 ft |
29 ft |
22 ft |
14 ft |
4 ft |
Read from the published curve image in Crane Pumps & Systems’ online Barnes catalog (model page EP72X – 3/4 HP), digitized and rounded down, at the digitized points nearest 20%, 50% and 75% of the curve’s 90 GPM end. Crane prints no performance table for this pump, so the values are checked against the curve and the series maximums only. Bold = the last point on the curve, its max flow.
Before You Buy — The Limits That Decide the Fit
| Solids |
Passes 4 in spherical solids |
| Liquid temperature |
104°F (40°C) Continuous |
| Minimum sump diameter |
EP72AX: 18 in (457mm) EP72X : 12 in (305mm) |
| Not for |
Swimming pools, recreational water parks or installations where people commonly contact the pumped liquid (Crane note) |
Applications
Plumbing, Residential Sumps, Wet Bars and Water Softeners.
Materials of Construction
| Volute & strainer |
Thermoplastic |
| Impeller |
Cast iron |
| Motor housing |
Cast iron |
| Shaft |
Stainless steel |