Barnes EP52X Submersible Sump and Effluent Pump - 1/2 HP 240V 1Ph, No Switch / EP52X - 23 ft Max, 84 GPM Max

Switch: No Switch
Model - Max: EP52X - 23 ft Max, 84 GPM Max

Product variant with selected options does not exist!

Price
$657.05
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 119330
Weight : 35.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Barnes · Submersible Sump and Effluent Pump
EP52X
2 builds of the EP52X submersible sump and effluent pump, 1/2 HP, 23 ft shut-off head and 84 GPM at the end of the published curve.
23 ft Max Head · 84 GPM Max
1/2 HP
240V 1Ph
No Switch or Wide-Angle Float
4 in Solids
1-1/2 in NPT Discharge
Cast Iron Motor, Thermoplastic Volute
20 ft Cord
35 lb Weight
Overview

Barnes sump pumps are robustly designed for long operational life, quiet operation, and dependable service. They are ideal for dirty water applications with minimal solids, and are available with or without integral level controls and in a variety of construction materials. Barnes sump pumps are also available in various package systems for installation flexibility.

  • Permanent Split Capacitor Motor
  • Oil Lubricated Ball Bearings
  • Top Suction Volute on Expel Series
  • Single Piece Motor Housing and Volute on SP/EP Series
  • Cast Iron Vortex Impeller on SP/EP Series
What Ships and What It Needs to Run

Included: The pump with its 20 ft power cord, by model; float-switch builds ship with the level control named in the Switch option.

Level control for No Switch builds, ordered separately. A piggyback float such as the Barnes piggyback control float switch or a control panel with floats starts and stops the pump.

Basin, check valve and discharge pipe: sized to your installation and ordered separately.

Genuine Barnes equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
24-Month Barnes Warranty

This pump is covered for 24 months from the date of shipment from Crane Pumps & Systems under Crane’s published Standard Terms and Conditions of Sale (revised 03/11/2026).

Specifications
Horsepower 1/2 HP
Voltage 240V 1Ph
Solids handling 4 in spherical solids
Discharge 1½ in NPT, Female, vertical
Motor Oil filled; Class B insulation
Single phase Permanent Split Capacitor (PSC). Includes thermal overload protection in motor
Seal Single mechanical, type 21
Upper bearing Single row, ball, oil lubricated
Lower bearing Single row, ball, oil lubricated
Cord entry 20 ft. (6m) Quick connect cord with plug and pressure grommet for sealing and strain relief
Level control EP52X: None EP52AX: Wide angle, mechanical, 20 ft. (6m) cord with Piggy-Back plug
Models & Performance — Will It Do What You Need?

Find your total head — the vertical lift from the pump to the discharge point plus friction in the pipe — and read across. The full curve is in the image gallery.

Models

Model Switch
EP52X No Switch
EP52AX Wide-Angle Float - Piggyback

Total head in feet at three flows

HP 0 GPM (Shut-off) 16 GPM 41 GPM 63 GPM 84 GPM (Max)
1/2 HP 23 ft 22 ft 17 ft 11 ft 3 ft

Read from the published curve image in Crane Pumps & Systems’ online Barnes catalog (model page EP52X – 1/2 HP), digitized and rounded down, at the digitized points nearest 20%, 50% and 75% of the curve’s 84 GPM end. Crane prints no performance table for this pump, so the values are checked against the curve and the series maximums only. Bold = the last point on the curve, its max flow.

Before You Buy — The Limits That Decide the Fit
Solids Passes 4 in spherical solids
Liquid temperature 104°F (40°C) Continuous
Minimum sump diameter EP52AX: 18 in (457mm) EP52X : 12 in (305mm)
Not for Swimming pools, recreational water parks or installations where people commonly contact the pumped liquid (Crane note)
Applications

Plumbing, Residential Sumps, Wet Bars and Water Softeners.

Materials of Construction
Volute & strainer Thermoplastic
Impeller Cast iron
Motor housing Cast iron
Shaft Stainless steel
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like