Barnes 4SE-L Solids Handling Sewage Pump - 5 HP 1750 RPM

HP - Voltage: 5 HP - 230V 1Ph
Model - Max: 4SE5024L - 46 ft Max, 511 GPM Max

Product variant with selected options does not exist!

Price
$9,611.92
Coupon 5% off applied automatically in your cart. No code needed.
SKU: 133149
Weight : 541.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Barnes · Solids Handling Sewage Pump
4SE-L
4 builds of the 4SE-L solids handling sewage pump, 5 HP, 46 ft shut-off head and 511 GPM at the end of the published curve.
46 ft Max Head · 511 GPM Max
5 HP
230V 1Ph · 200-230V 3Ph · 460V 3Ph +
Panel Controlled
3 in Solids
4 in Flange Discharge
Cast Iron Construction
Overview

Barnes 4SE Solids Handling pumps are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Barnes Solids Handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enough to meet almost any application need. This listing covers the 5 HP 4SE-L on one curve; standard and explosion-proof builds and each voltage are chosen in the options.

  • Solids Handling Capacity: 1.5-3 in, depending on model
  • Oil Filled, VFD Suitable Motor
  • Double Mechanical Seal
  • Cast iron construction
  • Epoxy sealed cord housing with strain relief grommet
What Ships and What It Needs to Run

Included: The pump.

Control panel required, ordered separately. Crane’s technical data calls for motor overload protection, a moisture-sensor relay in the control panel; the temperature sensors wire in series with the control circuit.

Guide rail base, rails and station piping: sized to your wet well and ordered separately; the Barnes BAF base elbow assemblies fit this discharge.

Genuine Barnes equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
24-Month Barnes Warranty

This pump is covered for 24 months from the date of shipment from Crane Pumps & Systems under Crane’s published Standard Terms and Conditions of Sale (revised 03/11/2026).

Specifications
Horsepower 5 HP
Voltage 230V 1Ph, 200-230V 3Ph, 460V 3Ph, 575V 3Ph
Solids handling 3 in spherical solids
Discharge 4 in 125lb., Horizontal flange
Speed 1750 RPM
Motor NEMA L- single phase, NEMA B - three phase torque curve, oil filled, squirrel cage induction Winding: Class B, class H rated magnet wire, class F on selected models Service Factor: 1.15
Single phase Permanent Split Capacitor (PSC) includes overload protection in motor
Three phase 200-240/480 is Tri Voltage motor. 600V Requires Overload Protection to be included in Control Panel
Seal Double mechanical, oil filled pressure equalized reservoir
Upper bearing Upper Bearing: Single row, ball, oil lubricated
Cord entry 30 ft. (9.1 m) Cord. Quick connect custom molded for sealing and strain relief
Moisture sensor Normally open (N/O), requires relay in control panel
Temperature sensor Normally Closed (N/C), Requires relay in control panel. For three phase units ONLY
Models & Performance — Will It Do What You Need?

Find your total head — the vertical lift from the pump to the discharge point plus friction in the pipe — and read across. The full curve is in the image gallery.

Models

Model Voltage FLA
4SE5024L 230V 1Ph 28
4SE5094L 200-230V 3Ph 20.9/19.0
4SE5044L 460V 3Ph 9
4SE5054L 575V 3Ph 8.3

Total head in feet at three flows

HP 0 GPM (Shut-off) 102 GPM 255 GPM 383 GPM 511 GPM (Max)
5 HP 46 ft 39 ft 28 ft 16 ft 1 ft

Read from the published curve image in Crane Pumps & Systems’ online Barnes catalog (model page 4SE-L – 5 HP), digitized and rounded down, at the digitized points nearest 20%, 50% and 75% of the curve’s 511 GPM end. Crane prints no performance table for this pump, so the values are checked against the curve and the series maximums only. Bold = the last point on the curve, its max flow.

Before You Buy — The Limits That Decide the Fit
Solids Passes 3 in spherical solids
Liquid temperature 104°F (40°C) Continuous
Applications

General Raw Sewage.

Materials of Construction
Volute Cast iron ASTM A-48, class 30
Impeller Cast iron ASTM A-48, class 30
Motor housing Cast iron ASTM A-48, class 30
Seal plate Cast iron ASTM A-48, class 30
Shaft 416 Stainless steel
Accessories
Accessory Code Description
Barnes Base Elbow Assembly (BAF) 11 part numbers Horizontal Break Away Fittings
Barnes Intermediate Rail Support 21 part numbers Intermediate Rail Supports
Barnes Capacitor and Relay Pack 9 part numbers Capacitor/Relay Packs
Barnes Pump Monitor Relay 2 part numbers Pump Monitor Relay
Barnes Close Adapter 2 part numbers Close Adapter
Barnes Cable Rack 4 part numbers Cable Rack for Level Controls
Barnes Flanged Adapter Plate (FAP) 20 part numbers Flygt Adapter
Barnes Ball Check Valve 6 part numbers Ball Check Valve
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet

Data sheets available on request — email sales@watermainsupply.com.

Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

You May Also Like