Smith-Blair · Tapped Repair Clamp
Style 264 Tapped Full Circle Repair Clamp
All Stainless Steel · Fabricated Lugs · Single Band · 3-8 in pipe
150 PSI Max Working Pressure
-20°F to +180°F Temperature
Nitrile (Buna-N) Gasket
All 304 Stainless Steel
Fabricated Stainless Lugs
NSF/ANSI 61 and 372
3/4 to 2 in NPT and CC Taps
3.46-9.39 in Pipe OD
5-17 lb Weight
Description
The Smith-Blair Style 264 is a single-band, all-stainless Full Circle repair clamp with a threaded outlet. A 360° gridded Nitrile gasket gives complete leak repair at broken or torn-out service connections and branch lines, and it serves as a new outlet on pipe drilled before installation. Fabricated stainless lugs and a keeper bar pull the clamp around the pipe and close it during installation.
Application: leaks at service outlets, broken or torn-out service connections and branch lines, and new outlets on pre-drilled pipe.
Key Features
- Single band, up to 0.40 in of OD range per clamp; larger clamps cover a wider range
- All 304 stainless band, lugs, keeper bar, outlet and studs; fluoropolymer-coated nuts resist galling
- NPT and CC (AWWA) outlets from 3/4 to 2 in
- Repairs pipe or joins pipe ends; can be made to odd pipe ODs
- Certified to NSF/ANSI 61 and NSF/ANSI 372; meets applicable portions of AWWA C230
What Ships and What It Needs to Run
Included: the clamp with its 360° Nitrile gasket and bonded bridge plate, 304 stainless studs, nuts and washers.
Pipe drilled before installation. Install the clamp over a pipe that is already drilled, or over the leaking service outlet it repairs. Smith-Blair does not allow tapping through the clamp.
Belleville spring washers on HDPE pipe, ordered separately. Smith-Blair p/n 150115-000 washers are required on HDPE pipe (DR17 or thicker; not for gas service). Ask us to include them with the clamp.
Genuine Smith-Blair equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month Smith-Blair Warranty
Smith-Blair warrants its products to be free of defects in materials and workmanship for one year from the date of shipment by Smith-Blair. Dated proof of purchase, such as a bill of sale, is required to establish eligibility. Smith-Blair will repair or, at its option, replace a defective product; the product is returned to the factory or warehouse Smith-Blair designates.
Working Pressure
Up to 150 PSI. Smith-Blair rates the allowable working pressure of a repair clamp to fall as pipe diameter rises; for a particular installation it is set by pipe size and type, the type and extent of the damage, service conditions and installation workmanship.
Materials Specifications
| Band |
Type 304 stainless steel (ASTM A240), 20 gauge |
| Lugs and fingers |
Type 304 stainless steel, fabricated (ASTM A240), 10 gauge |
| Keeper bar |
Type 304 stainless steel (ASTM A240), 14 gauge |
| Outlet |
Type 304 stainless steel (ASTM A276), welded to the band |
| Gasket |
Nitrile (Buna-N, ASTM D2000), full 360° gridded face with tapered ends |
| Bridge plate |
Type 304 stainless steel, quarter-hard, recessed flush and bonded to the gasket |
| Studs |
Type 304 stainless steel, 5/8-11 UNC x 7 in, epoxy-coated threads |
| Nuts |
Type 304 stainless steel, 5/8 in heavy hex, fluoropolymer coated to prevent galling |
| Washers |
Type 304 stainless steel, 5/8 in plain |
| Temperature range |
-20°F to +180°F |
Materials subject to change by the manufacturer. Options built to order: Type 316 stainless band and hardware, Viton or EPDM gaskets, spring washers for HDPE, offset gaskets for longer cracks, conductivity feature.
Pipe Applications
Cast iron, ductile iron, asbestos cement, PVC, HDPE (DR17 or thicker, with spring washers), steel, stainless steel, copper, aluminum, fiberglass and other pipe types.
Sizes and Outlet Taps
| Nominal |
Pipe OD range |
Widths |
Outlet taps |
| 3 in |
3.46-3.70 in
3.73-4.00 in |
7.5, 10, 12.5, 15 in |
3/4, 1 in NPT; 3/4, 1 in CC |
| 4 in |
3.96-4.25 in
4.45-4.73 in
4.74-5.14 in |
7.5, 10, 12.5, 15 in |
3/4, 1, 1-1/4, 1-1/2, 2 in NPT; 3/4, 1, 1-1/4, 1-1/2, 2 in CC |
| 6 in |
6.56-6.96 in
6.84-7.24 in |
7.5, 10, 12.5, 15 in |
3/4, 1, 1-1/4, 1-1/2, 2 in NPT; 3/4, 1, 1-1/4, 1-1/2, 2 in CC |
| 8 in |
8.54-8.94 in
8.99-9.39 in |
7.5, 10, 12.5, 15 in |
3/4, 1, 1-1/4, 1-1/2, 2 in NPT; 3/4, 1, 1-1/4, 1-1/2, 2 in CC |
Select the pipe OD range, the outlet tap and the band width above; the part number shows with the width. CC = AWWA corporation-stop thread.
Bolt Numbers
| Band width |
Studs |
Stud size |
| 7.5 in |
2 |
5/8 x 7 in |
| 10 in |
3 |
5/8 x 7 in |
| 12.5 in |
3 |
5/8 x 7 in |
| 15 in |
5 |
5/8 x 7 in |
Installation Notes
- Clean the pipe where the clamp will sit, removing scale, dirt and debris that could spoil the gasket seal.
- Lubricate the pipe and gasket with a soap-and-water solution that meets the water and pipe supplier’s requirements.
- Where the pipe ends gap 1 in or more, bridge the gap with a short section of pipe or a thin strip of sheet metal to support the gasket.
- Where 40% or more of the circumference is broken away, cover the opening with sheet metal and use a clamp that extends 3 in past it on both sides.
- Tighten from the center nut outward, keep the clamp centered on the break, and finish with a calibrated torque wrench to the torque in the instructions.
- Anchor the pipe: the clamp seals 360° around it, and Smith-Blair requires proper anchoring to restrain pipe movement and prevent pull-out.
From Smith-Blair Installation Instructions TI-008 (Rev 08/26/21), in the Data Sheet tab.
Before You OrderAll Smith-Blair products are Made to Order and Non-Returnable.
Items typically shipped in 5 - 10 business days.
Wider clamps (up to 30 in), odd pipe ODs, Type 316 stainless, Viton or EPDM gaskets and other tap sizes are built to order — email sales@watermainsupply.com with the pipe OD, material and tap.
