Goulds Water Technology
Convertible Jet Pumps
NSF-certified convertible jet pumps for shallow OR deep wells — J+, JRD and HSJ series. 0.5–2 HP, cast iron, single phase.
NSF/ANSI 61 & 372
Convertible
J+ · JRD · HSJ
0.5–2 HP
Shallow & Deep
Built in USA
Genuine Goulds Water Technology equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial distributor.
Overview
Goulds convertible jet pumps run on shallow wells (to 25 ft) with a bolt-on shallow well adapter, or deep wells (over 25 ft) with a twin-pipe or packer jet assembly and pressure control valve — using the appropriate Goulds fittings. This listing covers three series: the J+ (0.5–1.5 HP), the value JRD (0.5–1 HP), and the multi-stage HSJ (0.75–2 HP) for higher capacity and pressure at depth. All NSF/ANSI 61 & 372 certified.
Select your series and horsepower from the options above.
Key Features
-
Convertible — Runs shallow or deep well with the appropriate Goulds fittings.
-
Serviceable — Back pull-out design, two-compartment motor, and nozzle clean-out plug.
-
FDA-Compliant Impeller — Glass-filled engineered composite — corrosion and abrasion resistant.
-
Multi-Stage Power (HSJ) — Multi-stage design delivers high capacity at greater pressures and depths.
-
Stainless Steel Build (HSJ) — SS hex shaft, wear rings and coverplates for durability.
-
Corrosion Resistant — Electro-coat paint baked on inside and out.
-
Protected Mechanical Seal — Diaphragm retains water in the casing so the seal can never run dry.
-
NSF Listed — Certified to NSF/ANSI 61 & 372 for drinking water systems.
Specifications
| Pump Type |
Convertible jet (shallow or deep well) |
| Suction Connection |
1-1/4 in NPT |
| Discharge Connection |
1 in NPT |
| Drive (Pressure) Connection |
1 in NPT |
| Pressure Switch |
AS4 preset 30–50 PSI (HSJ 2 HP: AS10) |
| Motor |
NEMA standard, 60 Hz, 3500 RPM, single phase, capacitor start |
| Voltage |
115/230 V (HSJ 2 HP: 230 V only); built-in overload with automatic reset |
| Shaft / Rotation |
Stainless steel; clockwise viewed from motor end |
| Maximum Temperature |
140°F (60°C) |
| Casing |
Cast iron, electro-coat finish |
| Agency Listings |
NSF/ANSI 61 & 372, CSA (HSJ also UL listed) |
Models in This Listing
| Series |
Model |
HP |
Stages |
Weight |
Notes |
| J+ |
J5 |
0.5 |
1 |
50 lb* |
Shallow or deep well |
| J+ |
J7 |
0.75 |
1 |
55 lb* |
Shallow or deep well |
| J+ |
J10 |
1 |
1 |
59 lb* |
Shallow or deep well |
| J+ |
J15 |
1.5 |
1 |
68 lb* |
Shallow or deep well |
| JRD |
JRD5 |
0.5 |
1 |
37 lb |
Value line |
| JRD |
JRD7 |
0.75 |
1 |
42 lb |
Value line |
| JRD |
JRD10 |
1 |
1 |
47 lb |
Value line |
| HSJ |
HSJ07N |
0.75 |
2 |
53 lb |
Multi-stage, high pressure |
| HSJ |
HSJ10N |
1 |
2 |
58 lb |
Multi-stage |
| HSJ |
HSJ15N |
1.5 |
3 |
72 lb |
Multi-stage |
| HSJ |
HSJ20N |
2 |
3 |
75 lb |
Multi-stage, 230V only |
Performance
| J+ Peak Capacity |
Up to 26 GPM (shallow well) |
| JRD Peak Capacity |
Up to 22 GPM (shallow well) |
| HSJ Peak Capacity |
Up to 28 GPM (shallow well) |
| Deep Well |
Over 25 ft with a twin-pipe or packer jet assembly + pressure control valve |
| Detailed Ratings |
See the Technical Brochure for shallow well, twin-pipe and packer GPM by depth. |
Confirm Before OrderingTubing ships configured for shallow well use. Deep well setups require a twin-pipe or packer jet assembly, a pressure control valve, and a JDW fittings package or AV22 kit for the pressure-switch connection. Shallow well use requires the shallow well package. A pressure tank is required on all systems. HSJ 2 HP is 230 V only. Verify series, HP and voltage before ordering; never run the pump dry.
