Franklin Electric DCL1-1/2 close-coupled centrifugal pump
Franklin Electric DCL1-1/2 close-coupled centrifugal pump

Franklin Electric DBL1-1/2 NPT Centrifugal Pump

HP - Voltage: 1/3 HP - 115/230V 1Ph
Model: 3FPDBL1-1/2-SE

Product variant with selected options does not exist!
$2,254.77
SKU: 93162483
Weight : 48.0 lb
Free Shipping $499 or more
Need it fast? Call for same-day shipping options: 281.664.8000
Description
Franklin Electric Close-Coupled D-Series
Franklin Electric DBL1-1/2 NPT Centrifugal Pump
Close-coupled, electric motor driven centrifugal pump with heavy-duty cast iron body. Single- and three-phase motors in ODP and TEFC enclosures.
2 x 1.5 NPT
1800 RPM
1/3 HP – 1 HP
Capacities to 650 GPM
Heads to 300 ft
150 PSI Max Working Pressure
212°F Max Temperature
ODP & TEFC
Silicon Brass Impeller
Genuine Franklin Electric equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial distributor.
Overview

The D-Series is a close-coupled centrifugal pump built around a heavy-duty cast iron body for durability in irrigation, commercial, construction, municipal, and light industrial service. Motors from 1/3 to 2 HP use 56C frames with a shaft coupling design for easy removal; larger models use JM frame motors with a shaft sleeve and O-ring arrangement that protects the shaft from damage.

This listing covers the DBL1-1/2 hydraulic end with 2 x 1.5 NPT connections at 1800 RPM. Select horsepower, motor enclosure, and phase/voltage below — each combination is a distinct factory order number.

Features
  • Heavy-Duty Cast Iron Body — Cast iron construction throughout the volute for increased durability in continuous service.
  • Silicon Brass Impeller — Enclosed impeller matched to the D-Series hydraulic family for efficient, stable performance.
  • Easy Motor Removal — 56C frame motors (1/3–2 HP) use a shaft coupling design so the motor lifts off without disturbing the volute.
  • Shaft Sleeve Protection — JM frame motors use a shaft sleeve and O-ring design for added protection against shaft damage.
  • Mechanical Seal — Standard carbon/ceramic faces, nitrile elastomers, and 300 Series stainless components.
  • ODP & TEFC Options — Single- or three-phase motors with open drip-proof or totally enclosed fan-cooled enclosures.
Specifications
Connection Size 2 x 1.5 NPT — Suction x discharge
Pump Speed 1800 RPM — Nominal
Max Capacity 650 GPM — D-Series family
Max Head 300 ft — D-Series family
Max Working Pressure 150 PSI
Max Temperature 212 °F
Rotation Clockwise — Viewed from motor end
Body Material Cast Iron — Heavy-duty
Impeller Material Silicon Brass
Seal Carbon / Ceramic / Nitrile — 300 Series stainless components
Order Information
Order No. Model No. HP Enclosure Phase & Voltage Motor Fit Imp. Trim (in) Wt. (lbs)
93162483 3FPDBL1-1/2-SE 1/3 HP TEFC Single Phase 115/230V — 4.63 48
93162541 3FPBDL1-1/2-TE 1/3 HP TEFC Three Phase 230/460V — 4.63 59
93162492 5FPDBL1-1/2-SE 1/2 HP TEFC Single Phase 115/230V — 5.13 53
93162559 5FPDBL1-1/2-TE 1/2 HP TEFC Three Phase 230/460V — 5.13 57
93162509 7FPDBL1-1/2-SE 3/4 HP TEFC Single Phase 115/230V — 5.75 59
93162566 7FPDBL1-1/2-TE 3/4 HP TEFC Three Phase 230/460V — 5.75 61
93162517 1FPDBL1-1/2-SE 1 HP TEFC Single Phase 115/230V — 6.44 66
93162574 1FPDBL1-1/2-TE 1 HP TEFC Three Phase 230/460V — 6.44 62
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Close-Coupled D Series Catalog (Mi4058)D-Series Brochure (Mi2050)End Suction Centrifugal Manual (106107101)D Series Repair Kits (106323101 Rev 3)Surface Pumps Brochure (M5287)FPS Engineering Manual (Mi1008)
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

Share E-mail

You May Also Like