Dresser Style 575 Angle Ball Valve - 1-1/4 in MIPT
Dresser Style 575 Angle Ball Valve dimension drawing
Dresser Style 575 Angle Ball Valve dimension drawing
Dresser Style 575 Angle Ball Valve specification table
Dresser Style 575 Angle Ball Valve specification table
Dresser Style 575 Angle Ball Valve - 1-1/4 in MIPT
Dresser Style 575 Angle Ball Valve dimension drawing
Dresser Style 575 Angle Ball Valve dimension drawing
Dresser Style 575 Angle Ball Valve specification table
Dresser Style 575 Angle Ball Valve specification table

Dresser Style 575 Angle Ball Valve - 1-1/4 in MIPT x 1-1/8 in OD PE Service Tee, Gas - 0575-0001-001

$720.61
SKU: 0575-0001-001
Weight : 3.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
Dresser · Gas Angle Valve
Style 575 Angle Ball Valve
Angle ball valve, 1-1/4 in MIPT x 1-1/8 in OD PE, for gas service tees.
125 PSI Max Working Pressure
Ductile Iron Body
90 Degree Operation
Natural Gas Service
3 lb Weight
Overview

The Dresser Style 575 pairs a ductile iron body with a high-strength engineered plastic plug for low torque, quarter-turn operation and positive shutoff.

Application: Gas service tees and service line shutoff.

  • Quarter-turn operation
  • Dresser part number 0575-0001-001
What Ships and What It Needs to Run

Included: valve, assembled.

Genuine Dresser equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month Dresser Warranty

Covered for 12 months from the date of purchase under Dresser’s published warranty terms.

Working Pressure

Rated to 125 PSI on natural gas.

Source: Dresser Gas Product Selection Guide (NGS-DPS-015). The rating on the product label is the actual rating of each part.

Installation Notes
  • Mark the pipe and stab it into the fitting to the full stab depth.
  • On PE pipe, install the correct-SDR Dresser insert stiffener (or one qualified to DOT 192.283(b)) in every PE pipe end.
  • Anchor the pipe joint wherever pull-out can occur.
  • Read the Dresser installation instructions and warnings before installing.

Source: Dresser Gas Product Selection Guide (NGS-DPS-015), product warnings.

Before You Order. Anchor the joint wherever pullout could occur from forces other than line pressure. Non-stock Dresser parts are not returnable without Dresser’s authorization, and ship time is confirmed when you order. Custom builds (other sizes, widths, gaskets or materials) are available: email sales@watermainsupply.com with the pipe OD, material and line content.
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
Gas Service Valves Brochure (Styles 175, 275, 350, 351, 575)
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

Share E-mail

You May Also Like