Menu
Your cart is empty
Looks like you haven't added anything to your cart yet
Campbell Water System Products
Availability
Type
Voltage
Price
$0
$3,116.09
Campbell ABS Well Seal - Submersible Single Hole
Campbell
Campbell ABS Well Seal - Submersible Single Hole
- Price
- From $48.84
Campbell Tank Manifold & Specialty Cross
Campbell
Campbell Tank Manifold & Specialty Cross
- Price
- From $42.12
Campbell Sewage Pump Disconnect Accessories
Campbell
Campbell Sewage Pump Disconnect Accessories
- Price
- From $41.10
Campbell Non-Guide Rail Sewage Pump Disconnect
Campbell
Campbell Non-Guide Rail Sewage Pump Disconnect
- Price
- From $170.39
Campbell Yard Hydrant Steel Rod Assembly
Campbell
Campbell Yard Hydrant Steel Rod Assembly
- Price
- From $53.78
Campbell Cast Iron Foot Valve & Replacement Parts
Campbell
Campbell Cast Iron Foot Valve & Replacement Parts
- Price
- Call for pricing
Campbell Check Valve (Enviro-Check & Specialty)
Campbell
Campbell Check Valve (Enviro-Check & Specialty)
- Price
- Call for pricing
Campbell Water System Products
Catalog › Campbell Manufacturing
Campbell Mfg — Authorized Distributor
CampbellWater Well, Pump & Pumping System Accessories
The most complete water-well and pump accessory catalog in North America. Hydrants, well seals, pitless adapters, tank tees, valves, switches, and disconnects — all from a single source. Same-day shipping from Houston.
14
Product Categories
2,600+
Catalog SKUs
NSF
61/372 Compliant
100+
Years U.S. Mfg
Why Campbell
Campbell Manufacturing has supplied the U.S. water-well and pump industry for over a century. One catalog covers virtually every accessory a well drilller, pump installer, or system integrator needs — from the wellhead to the pressure tank.
1
Single-Source Catalog
Stop chasing five vendors for one job. Campbell catalogs every accessory class — brass, valves, fittings, hydrants, pitless, tank manifolds, electrical, and disconnects — under one part-number system.
NSF
Lead-Free & Drinking-Water Approved
NSF/ANSI 61 and 372 compliant lines across brass fittings, well seals, pitless adapters, and tank tees — the standards required for potable water service in every U.S. state.
A−T
Catalog Sections A through T
77 catalog sections covering insert fittings, threaded fittings, nipples, compression, valves, hydrants, well seals, well caps, pitless adapters, sewage disconnects, tank tees, well points, accessories, switches, and filtration.
2"−6"
Sized for Real-World Wells
Well seals, caps, and pitless adapters in 4 in, 5 in, and 6 in casing sizes. Hydrants in standard 3/4 in and heavy-duty 1 in service. Tank tees and crosses to 2 in.
UL
UL/CSA Listed Electrical
Square D pressure switches and SJE-Rhombus float switches and control panels are UL/CSA listed for residential, commercial, and municipal pump-control applications.
What Watermain Supply Provides
Authorized Campbell distribution backed by a Houston-based team that actually understands what you're building, repairing, or replacing.
Our Campbell Service Includes
- Authorized Campbell distributor. Direct access to the full Campbell catalog — including specialty and import-pricing SKUs that aren't carried at most plumbing supply houses.
- Same-day shipping from Houston. Stocked inventory on the high-velocity SKUs — hydrants, well seals, pitless adapters, tank tees, pressure switches — ships the same day on orders placed before 2 PM CT.
- Application-correct selection. We size hydrants by bury depth, pitless adapters by casing OD and pump HP, well seals by drop pipe count, and tank tees by tank port size. No guesswork at the counter.
- Lead-free verification. Every potable-water SKU is verified against NSF 61/372 before shipping — critical for new installations under post-2014 federal lead-content rules.
- Bulk & contractor pricing. Volume tiers on hydrants, fittings, clamps, and tank-tee packages for active well installers, plumbing contractors, and municipal accounts.
- Cross-reference & substitution. If a Baker, Boshart, Merrill, or Simmons part number is what you've always used, we'll cross-reference to the equivalent Campbell SKU.
Campbell Product Families
Complete catalog coverage organized by application. Click any family below to see the full SKU list and pricing.
Well-Head & Casing Components
Frostproof Hydrants & Faucets
Heavy-Duty · Compact · Sanitary · Wall
Yard hydrants in three weights — Heavy Duty, Compact, and Sanitary — with bury depths from 1 ft to 10 ft. Frostproof wall faucets, riser pipe, and full replacement parts. ASSE 1057 sanitary models for irrigation backflow protection.
Bury Depths1 – 10 ft
Inlet3/4 in · 1 in NPT
BodyCast iron + brass
SKUs9 product lines
View Hydrants
Well Seals
Cast Iron · ABS · Single & Double Hole
Cast iron and ABS well seals for 4 in, 5 in, and 6 in casing. Single hole for submersible drop pipe; double hole for jet-pump suction and pressure pipes. Includes pump screens and well-seal vents.
Casing4 in · 5 in · 6 in
Pipe Holes1 · 2 (single/double)
MaterialCast iron + ABS
SKUs7 product lines
View Well Seals
Well Caps
Watertight & Vented · Aluminum & ABS
Sealed aluminum/ABS watertight well caps and vented caps for jet-pump and submersible installations. 4 in, 5 in, and 6 in casing. Vented models include screened ports for atmospheric balancing on shallow systems.
TypeWatertight · Vented
Casing4 in · 5 in · 6 in
MaterialAluminum · ABS
SKUs3 product lines
View Well Caps
Pitless Adapters
Bantam · S-Series · Clear-Casing · Specialty
Bantam (1 in) and S-Series (1 1/4 in – 2 in) pitless adapters for steel and plastic well casings. Clear-casing styles for irrigation and contractor jobs. Specialty units for unusual casing materials. Drain & wire fittings included.
Service Size1 – 2 in
Casing4 in · 5 in · 6 in
BodyBrass + bronze
SKUs6 product lines
View Pitless Adapters
Driven Well Equipment
Well Points · Pitcher Pumps · Drive Hardware
Stainless and brass well points (1 1/4 in and 2 in) for shallow driven wells. Pitcher hand pumps for off-grid and emergency water supply. Drive shoes, cup leathers, and accessories for sand-point installations.
Point Sizes1 1/4 in · 2 in
Mesh60 · 80 · 100
Length24 in · 36 in
SKUs2 product lines
View Driven Well
Valves — Check, Foot & Service
Check & Foot Valves
Brass · Cast Iron · PVC · Specialty
Domestic brass check valves, cast iron foot valves, SLO PVC check valves, Brady valves, and Flomatic Enviro-Check specialty valves. Sized 1/2 in through 4 in for jet-pump suction, drop-pipe check, and tank discharge service.
Sizes1/2 – 4 in
MaterialBrass · CI · PVC
TypeSpring · Flapper · Disc
SKUs6 product lines
View Check & Foot Valves
Plumbing Valves
Brass · Stainless · Plastic Ball Valves
Domestic and import brass ball valves, stainless ball valves, and plastic ball valves for service, isolation, and supply lines. Brass and plastic service valves for curb-stop and meter-yoke applications.
Sizes1/4 – 2 in
BodyBrass · SS · PVC
Lead-FreeNSF 61/372 options
SKUs2 product lines
View Plumbing Valves
Specialty Valves
Relief · Flow Regulator · Air · Float
Pressure relief valves and flow regulators for system protection. Tank float valves, air-release valves, and accessories for booster and pressure-tank installations.
FunctionRelief · Air · Float
Sizes1/2 · 3/4 · 1 in
Pressure75 · 100 · 150 psi
SKUs2 product lines
View Specialty Valves
Fittings, Tank Tees & Manifolds
Compression Fittings
PVC · Hanflo Poly-Pipe · Galvanized
Hanflo poly-pipe compression couplings, adapters, elbows, and tees in 1/2 in – 2 in. PVC compression fittings for slip and threaded transitions. Galvanized compression for steel pipe service.
Sizes1/2 – 2 in
BodyPVC · Brass · Galv
Pressure160 – 250 psi
SKUs2 product lines
View Compression Fittings
Tank Tees & Manifolds
Red Brass · Union · Manifold · Packages
Red brass tank tees and crosses (1 in – 1 1/4 in), union tank crosses, full tank manifold assemblies, and complete tank-fitting packages with gauge, switch, and drain. Pre-built and unassembled options.
Sizes1 in · 1 1/4 in
BodyRed brass
Lead-FreeNSF 61/372 options
SKUs4 product lines
View Tank Tees
Pump & Installation Accessories
Installation Accessories
Pressure Gauges · Air Volume Controls
Liquid-filled and dry pressure gauges (0–100 psi and 0–200 psi). Brady AVCs and bleeder fittings for galvanized hydropneumatic tanks. Drain valves, snifters, and assorted installation hardware.
Gauge Range0–100 · 0–200 psi
Connection1/4 in NPT
AVC TypeBrady · bleeder
SKUs3 product lines
View Accessories
Ideal Hose Clamps
All-Stainless · Standard · Pinch · Tools
Ideal worm-gear hose clamps in standard and all-stainless construction. Single-ear pinch clamps for crimp service. Pinch-clamp installation tools and ratcheting hose-clamp drivers.
Diameters1/4 – 5 in
MaterialSS · zinc-plated
SeriesQ1 · Q2 · Q3 · Q4
SKUs4 product lines
View Ideal Clamps
Pressure & Float Switches
Square D · SJE-Rhombus · Alarm Panels
Square D 9013 pressure switches in standard cut-in/cut-out ranges (20/40, 30/50, 40/60). SJE-Rhombus mercury and mechanical float switches. Alarm panels and control panels for sewage, sump, and lift-station service.
Pressure SwitchSquare D 9013
Float SwitchSJE-Rhombus
ListingUL · CSA
SKUs3 product lines
View Switches
Sewage Pump Disconnects
Guide Rail · Non-Guide Rail · Accessories
Guide-rail and non-guide-rail sewage pump disconnect systems for submersible sewage and effluent pumps. Lift-out service for wet wells and septic tanks. Discharge bend, base elbow, and rail accessory kits.
Discharge2 · 3 · 4 in
Pump StyleSubmersible sewage
MaterialCast iron + SS rail
SKUs3 product lines
View Disconnects
Application Selection Guide
Match the right Campbell product to the application. The guide below covers the most common installer scenarios.
New Submersible Well Install
Need: Pitless adapter (S-Series, sized to drop pipe) + Single-hole well seal (cast iron, sized to casing) + Watertight well cap + Tank tee package.
Jet Pump Replacement
Need: Double-hole well seal (cast iron or ABS, 4 in or 6 in casing) + Foot valve at suction + Vented well cap + suction-line check valve.
Pressure Tank Build-Out
Need: Tank tee or cross (1 in or 1 1/4 in red brass) + Pressure gauge + Square D pressure switch (40/60 typical) + Air volume control for galvanized tanks only.
Yard Hydrant Install
Need: Frostproof yard hydrant sized to bury depth (Houston: 2 ft minimum) + galvanized riser pipe + sanitary model if irrigation backflow is a concern.
Sewage Lift Station
Need: Guide rail or non-guide rail disconnect sized to discharge + SJE-Rhombus float switches (typically 3-float duplex) + Alarm panel with high-water alarm.
Shallow Driven Well
Need: Stainless or brass well point (2 in for jet, 1 1/4 in for hand pump) + drive shoe + cup leathers + optional pitcher pump for off-grid.
Poly Pipe Service Line
Need: Hanflo compression couplings sized to pipe SDR + transition adapters to brass or PVC + Ideal stainless clamps as backup at insert fittings.
Backflow / Cross-Connection
Need: Sanitary frostproof yard hydrant (ASSE 1057) + isolation ball valve + check valve at outlet. Required for irrigation, livestock watering, and chemical tank fills.
Installation Standards & Sizing Reference
Specification reference for the most-installed Campbell categories. Match these dimensions to your job before ordering.
Hydrant Bury Depth
Specify hydrant bury depth equal to or greater than local frost line. Houston/Gulf Coast: 2 ft minimum. North Texas/Oklahoma: 3 – 4 ft. Northern states: 5 – 8 ft. Heavy-duty models go to 10 ft.
Pitless Casing Match
Pitless adapters mount through the casing wall. Order by casing OD (4 in, 5 in, or 6 in nominal) and service-line size (Bantam 1 in; S-Series 1 1/4 in, 1 1/2 in, 2 in). Drilled hole must match adapter spec.
Well Seal Hole Count
Single-hole = submersible drop pipe only. Double-hole = jet-pump suction + pressure pipes. Add a third hole only with vent kit. All seals are casing-OD specific — do not substitute by ID.
Pressure Switch Range
Square D 9013 standard ranges: 20/40 (low-pressure systems), 30/50 (most residential), 40/60 (typical with bladder tank), 50/70 (high-pressure or two-story). Always specify cut-in/cut-out.
NSF 61 / 372 — Lead-Free
Federal Reduction of Lead in Drinking Water Act (2014) requires ≤0.25% lead by weight on potable-water wetted surfaces. Campbell offers NSF 61/372 brass and bronze across well seals, pitless, tank tees, and ball valves. Always specify "LF" suffix for new install.
Tank Tee Sizing
Match tank tee port to tank inlet (typically 1 in or 1 1/4 in NPT). Include drain valve, gauge port, switch port, and relief port. Pre-assembled packages save 30+ minutes per tank install.
Frostproof Hydrant Quick Reference
Most-ordered hydrant configurations — standard inlet sizes and bury depths. Replacement parts available for every model.
| Model | Inlet | Bury Depths | Body | Best For |
|---|---|---|---|---|
| Heavy Duty | 3/4 in · 1 in NPT | 1, 2, 3, 4, 5, 6, 8 ft | Cast iron + brass | Farms, commercial, livestock |
| Compact | 3/4 in NPT | 1, 2, 3, 4 ft | Cast iron + brass | Residential, garden, irrigation |
| Sanitary (ASSE 1057) | 3/4 in NPT | 2, 3, 4, 5, 6 ft | Brass + SS internals | Backflow protection required |
| Wall Faucet | 1/2 in · 3/4 in | 4, 8, 10, 12, 14 in | Brass body | Exterior building walls |
Pitless Adapter Quick Reference
Casing OD and service-line size determine the adapter. Always match drilled hole to adapter spec — mismatched holes will leak.
| Series | Service Line | Casing OD | Pump HP Range | Application |
|---|---|---|---|---|
| Bantam | 1 in | 4 in · 5 in · 6 in | Up to 1 HP | Residential submersible |
| S-Series | 1 1/4 in | 4 in · 5 in · 6 in | 1 – 3 HP | Larger residential / light commercial |
| S-Series | 1 1/2 in | 5 in · 6 in | 3 – 5 HP | Commercial · multi-family |
| S-Series | 2 in | 6 in | 5 – 10 HP | Irrigation · small municipal |
| Clear-Casing | 1 in · 1 1/4 in | 4 in · 5 in · 6 in | Up to 3 HP | Open-bore / non-standard casings |
| Specialty | Varies | Varies | Varies | Plastic casing · deep set · custom |
Well Seal Sizing Reference
Well seals are casing-OD specific. Match the seal to the casing exactly — never substitute by ID. Single-hole for submersible drop pipe; double-hole for jet-pump suction + pressure.
| Casing Size | Material | Hole Config | Pipe Sizes Accepted | Best For |
|---|---|---|---|---|
| 4 in | Cast iron | Single hole | 1 in · 1 1/4 in drop pipe | Residential submersible |
| 4 in | Cast iron | Double hole | 1 1/4 + 1 in suction/pressure | Jet-pump install |
| 4 in | ABS | Single hole | 1 in · 1 1/4 in | Corrosive water · light duty |
| 4 in | ABS | Double hole | 1 1/4 + 1 in | Jet pump · iron-staining water |
| 5 in | Cast iron | Single · Double | Up to 1 1/2 in pipe | Larger residential |
| 6 in | Cast iron | Single hole | 1 1/4 in · 1 1/2 in · 2 in | Commercial · deep submersible |
| 6 in | Cast iron | Double hole | 1 1/2 + 1 1/4 in | Larger jet-pump systems |
Tip: Add a well-seal vent kit when installing a pitcher pump or where atmospheric balancing matters. Vents are also recommended on shallow wells with high water-table fluctuation.
Pressure Switch & Tank Pre-Charge Reference
Pressure-tank pre-charge must be set 2 psi below the cut-in pressure. Mismatched precharge is the #1 cause of switch chatter, short cycling, and bladder failure.
| Switch Range | Cut-In | Cut-Out | Tank Pre-Charge | Typical Application |
|---|---|---|---|---|
| 20/40 | 20 psi | 40 psi | 18 psi | Low-pressure / gravity-assisted systems |
| 30/50 | 30 psi | 50 psi | 28 psi | Standard residential |
| 40/60 | 40 psi | 60 psi | 38 psi | Most common modern residential |
| 50/70 | 50 psi | 70 psi | 48 psi | Two-story homes · long supply runs |
| 60/80 | 60 psi | 80 psi | 58 psi | High-pressure / commercial |
Always check pre-charge with the tank empty and isolated from system pressure. Adjust with a standard tire-valve gauge and bicycle pump or low-pressure compressor.
Tank Tee Configuration Reference
Match tank tee port size to your pressure tank inlet. Pre-built packages include all required fittings — saves install time and eliminates leak points.
| Tank Tee Size | Tank Volume Range | Standard Ports | Material | Application |
|---|---|---|---|---|
| 1 in | 20 – 44 gal bladder | Tank, system, drain, gauge, switch, relief | Red brass | Standard residential |
| 1 1/4 in | 44 – 86 gal bladder | Tank, system, drain, gauge, switch, relief | Red brass | Larger residential · light commercial |
| Union Tank Cross | Any size | Removable union for service | Red brass | Service-friendly install |
| Tank Manifold | Any size | Multiple tanks · multi-port | Red brass | Multi-tank parallel installs |
| Pre-built Package | Any size | Tee + gauge + switch + drain + relief | Red brass + accessories | Fastest install · volume contractors |
Cross-Reference — Common Brand Equivalents
If you've always specified a Boshart, Merrill, or Simmons part number, here's the Campbell equivalent. Cross-references are functional matches — always verify dimensions and material against the OEM spec before substituting.
| Product | Campbell | Boshart | Merrill | Simmons |
|---|---|---|---|---|
| 1 in Bantam Pitless Adapter | BAB Series | BPL Series | BAS-100 | 1701/1702 |
| 1 1/4 in S-Series Pitless | SAB-125 | SPL-125 | BAS-125 | 1725 |
| 4 in Cast Iron Single-Hole Seal | SCC4-100 | WS4-100 | WS4S-100 | 4x1 |
| 4 in Cast Iron Double-Hole Seal | DCC4-114-100 | WS4-D-114-100 | WS4D-114 | 4D-114 |
| 6 in Cast Iron Well Seal | SCC6-125 | WS6-125 | WS6S-125 | 6x1.25 |
| 3/4 in Yard Hydrant (4 ft bury) | HYC-4 | YH-4 | C-4 | 4801 |
| Sanitary Hydrant ASSE 1057 | SAN Series | SH Series | YHS Series | 4807-WCD |
| 1 in Brass Tank Tee | TT-100 | TT-100 | BTT-100 | BT-100 |
| Square D Pressure Switch 30/50 | FSG2J21BP | 9013FSG2J21 | (Square D) | (Square D) |
| SJE-Rhombus Mercury Float | SF Series | (SJE) | (SJE) | (SJE) |
Don't see your part number? Email the part number, brand, and a photo to sales@watermainsupply.com — we'll cross-reference within one business day.
Houston & Gulf Coast Application Notes
Local conditions drive a few non-obvious sizing and material choices for water-well and pump installs in the Gulf Coast region.
Bury Depth — Houston Metro
Frost line is essentially zero. 1 ft or 2 ft compact yard hydrants are sufficient for residential. Heavy-duty 3 ft – 5 ft is over-spec for frost but still preferred for high-flow livestock and commercial.
Iron-Bearing Water
Much of east Texas and the Gulf Coast pulls iron-rich groundwater. ABS well seals and stainless well caps outlast cast iron 3:1. Brass and stainless ball valves resist staining and pitting from high-iron, high-chloride water.
Hurricane / Storm Backup
Lift stations and effluent pumps in flood-prone areas need SJE-Rhombus alarm panels with high-water alarms and battery backup. Add a Campbell sewage disconnect to enable rapid pump removal post-flood.
NSF 61 Required Statewide
Texas Commission on Environmental Quality (TCEQ) requires NSF/ANSI 61 compliance on all wetted parts in public water systems — and best-practice on private wells. Always specify "LF" suffix Campbell brass for new install.
Salt-Air Coastal Installs
Within ~10 miles of the coast, salt-spray accelerates corrosion. All-stainless Ideal hose clamps (Q2 series), brass or stainless valves, and ABS well seals are mandatory for hurricane-grade installations.
High-Iron Pressure Switches
Standard Square D switches can foul in high-iron systems. Specify the diaphragm-style switch or install an inline sediment filter ahead of the switch port. Inspect switch contacts annually.
Frequently Asked Questions
Is Campbell an authorized brand at Watermain Supply?
Yes. We are an authorized Campbell distributor with full catalog access — including specialty SKUs (filtration cartridges, metering pumps, UV systems, Rusco strainers) that are not commonly stocked. If a Campbell part number exists, we can ship it.
Are Campbell products NSF 61 / 372 lead-free?
Campbell offers both lead-free and standard brass across most catalog lines. Look for the "LF" or "TLF" suffix in the part number (e.g., MAB 2TLF). Federal law (2014) requires lead-free brass on all new potable-water installations — we'll confirm compliance on every order before shipping.
What's the difference between cast iron and ABS well seals?
Cast iron is the heavier, longer-life option — specified for permanent submersible installations, deep wells, and commercial service. ABS is corrosion-immune and lighter — ideal for jet-pump installations, shallow wells, and where iron staining is a water-quality concern. Both seal equally well when sized correctly to the casing.
How do I size a pitless adapter?
Three measurements: (1) Casing OD — 4 in, 5 in, or 6 in nominal. (2) Service-line size — 1 in (Bantam) for residential up to 1 HP, 1 1/4 in – 2 in (S-Series) for larger systems. (3) Drilled hole size — must match the adapter's spec exactly. Order the matching hole saw or specify which one you have on hand.
Which yard hydrant for Houston / Gulf Coast?
Frost line in Houston is essentially zero, so a Compact 1 ft or 2 ft bury depth is sufficient for residential. North Texas and the panhandle should use 3 ft. For commercial and livestock applications, the Heavy-Duty model is recommended regardless of frost depth — the 1 in inlet handles higher flow without pressure drop.
Do I need a sanitary (ASSE 1057) hydrant?
Yes if there's any chance of cross-connection with non-potable water — irrigation tanks, livestock troughs, chemical sprayers, hose-end fertilizers. The ASSE 1057 internal vacuum breaker prevents siphoning back into the potable supply when the hydrant is off. Many municipalities and the IPC require it on all exterior hydrants.
Square D pressure switch — which range do I order?
30/50 psi is the most common residential range. 40/60 psi pairs with a properly precharged bladder tank for stronger fixture pressure. 50/70 psi for two-story homes or where pressure drops at second-floor showers. Always set the bladder-tank precharge to 2 psi below cut-in — mismatched precharge causes short cycling and switch failure.
What's the difference between SJE-Rhombus mercury and mechanical floats?
Mercury floats are quieter, longer-life, and rated for higher current — preferred for residential effluent and sump applications. Mechanical floats use a spring-loaded micro-switch — mercury-free, required by some jurisdictions, and used in most municipal lift-station builds today. Both work; the choice is usually code-driven.
Do tank-fitting packages save real time?
Yes — a pre-built tank tee with gauge, switch, drain, and relief port saves roughly 30 minutes per tank install, eliminates the trip back for "the one fitting I forgot," and reduces leak points. Worth the small price premium on every install over 10 tanks.
Do you ship same day?
Yes — orders for stocked SKUs placed before 2 PM Central ship the same business day from our Houston warehouse. Specialty and import-pricing SKUs may have a 2–5 day lead time. We'll confirm the exact ship date on quote acceptance.
Can you cross-reference Boshart, Merrill, or Simmons part numbers?
Yes — the cross-reference table above covers the most-requested equivalents. For anything not listed, email the part number, brand, and a photo if possible to sales@watermainsupply.com. We'll return a Campbell equivalent within one business day with confirmed dimensional and material match.
What's the difference between bladder and air-over-water tanks?
Bladder tanks use a sealed butyl bladder — no AVC needed, longer life, modern standard. Air-over-water (galvanized hydropneumatic) tanks need a Brady AVC or bleeder fitting to maintain the air cushion. We stock Campbell components for both, but recommend bladder tanks on all new residential installs.
Are Ideal Q1 vs Q2 vs Q3 vs Q4 clamps interchangeable?
Functionally similar but spec-different. Q1 is the standard zinc-plated band with stainless screw — general use. Q2 is all-stainless — specify for coastal, food-grade, or corrosive service. Q3 covers the installation tool and ratchet driver category. Q4 is the single-ear pinch clamp series — one-time crimp install on PEX, hose barbs, and insert fittings.
What if I'm replacing a single hydrant part — do you sell parts?
Yes — full replacement parts are available for all three hydrant lines (Heavy Duty, Compact, Sanitary). Plunger kits, link rods, packing assemblies, head assemblies, valve seats, and complete riser-pipe replacement. Specify your hydrant model and bury depth and we'll match the correct kit.
Get a Campbell Quote Today
Tell us the application — well install, hydrant replacement, tank build-out, lift station — and we'll spec the right Campbell SKUs and ship from Houston. Same-day on stocked items.
281.664.8000
Watermain Supply · Authorized Campbell Manufacturing Distributor · Houston, TX
281.664.8000 · sales@watermainsupply.com · www.watermainsupply.com
281.664.8000 · sales@watermainsupply.com · www.watermainsupply.com
- Choosing a selection results in a full page refresh.