JCM 418 Fabricated Threaded Outlet Tapping Sleeve - product photo
JCM 418 Fabricated Threaded Outlet Tapping Sleeve - product photo

JCM 418 Fabricated Threaded Outlet Tapping Sleeve - 3/4 to 4 in NPT

Nominal Size - OD Range: 4 in - 4.50 in OD
Outlet Tap: 3/4 in NPT
Part No.: 418-0450X06IP

Product variant with selected options does not exist!
$466.63
SKU: 418-0450X06IP
Weight : 21.0 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
JCM Industries · Tapping Sleeve
JCM 418 Fabricated Threaded Outlet Tapping Sleeve
Carbon Steel · 3/4 to 4 in npt outlets · 4.50-57.25 in pipe OD
250 PSI Working Pressure
Carbon Steel
Buna-N Gasket
-40°F to +212°F Gasket
3/4 to 4 in NPT Outlets
4.50-57.25 in Pipe OD
21-205 lb Weight
Description

The JCM 418 fabricated threaded outlet tapping sleeve makes taps and service connections on larger pipe, thin-wall pipe and pipe needing extra reinforcement, including air relief connections and taps on A/C, cast iron, ductile iron, PVC and reinforced concrete pipe.

The heavy gasket section and full sleeve support give much more stability, reinforcement and strength than a strapped saddle, with IPS (NPT) outlets from 3/4 through 4 in. It is furnished with shop coat and alloy bolts.

Typical application: Branching: line branches, valves, internal line access, service and air relief connections.

Key Features

  • IPS (NPT) threaded outlets from 3/4 through 4 in
  • Full sleeve reinforces the pipe; lighter than cast sleeves
  • Rated 250 PSI on 3/4-4 in outlets
What Ships and What It Needs to Run

Included: the sleeve halves with the gasket, bolts and nuts.

Corporation stop or valve, ordered separately. The valve or fitting threads into the IPS outlet.

Genuine JCM Industries equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month Warranty

Covered for 12 months from the date of purchase against defects in materials and workmanship. Keep the dated invoice as proof of purchase.

Working Pressure

250 PSI on 3/4-4 in outlets. JCM's service rating; higher ratings are available for specific applications and sizes.

Materials Specifications
Body Fabricated carbon steel
Outlet Threaded IPS (NPT) outlet, 3/4 through 4 in
Bolts Low-alloy steel standard; stainless optional
Gasket NBR (Buna-N) per ASTM D2000, pressure-activated hydromechanical design bonded into a cavity; -40°F to +212°F
Finish Shop coat standard; epoxy coating optional

From the JCM 418 material specification.

Pipe Applications

Cast iron, ductile iron, PVC, PE, steel, A/C and other pipe within the listed ranges.

Sizes and Outlets

26 OD ranges from 4.50 to 57.25 in. Open the table for every range and outlet.

All 26 sizes
Nominal Sleeve OD range Outlets
4 in 4.50 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
4 in 4.80 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
6 in 6.63 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
6 in 6.90 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
8 in 8.63 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
8 in 9.05 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
10 in 10.75 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
10 in 11.10 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
12 in 12.75 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
12 in 13.20 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
14 in 14.59-15.08 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
14 in 15.23-15.80 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
14 in 16.30-16.73 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
16 in 17.33-17.87 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
16 in 18.62-19.19 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
18 in 19.41-20.01 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
18 in 20.93-21.57 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
20 in 21.51-22.15 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
20 in 23.46-24.16 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
24 in 25.71-26.41 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
24 in 28.14-28.84 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
30 in 31.62-32.22 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
36 in 38.10-38.75 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
42 in 44.10-44.70 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
48 in 50.40-51.00 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT
54 in 56.60-57.25 in 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 in NPT

From the JCM price list.

Before You OrderConfirm the pipe OD, outlet size and outlet type before ordering.
Dimensional submittal drawings are available on request.
For a submittal or an odd OD, email sales@watermainsupply.com with the pipe OD, pipe type and line content.
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
JCM 418 Fabricated Threaded Outlet Tapping Sleeve Data Sheet
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

Share E-mail

You May Also Like