TIGERFLOW TEFC NEMA C-face pump motor with conduit box
TIGERFLOW TEFC NEMA C-face pump motor with conduit box

TIGERFLOW TEFC NEMA C-Face Pump Motor - 2-Pole, 3500 RPM, 60 Hz

HP - Voltage: 3/4 HP - 115/230V 1Ph
Frame - Part No.: 56C - 3200026079

Product variant with selected options does not exist!
$477.36
SKU: 3200026079
Weight : 27.5 lb
Loading locations...
Free Shipping $499 or more
Skip the chatbot. Talk to an expert.
1-888.510.4036 · Same-day shipping available
Description
TIGERFLOW · Pump Motor
TEFC NEMA C-Face Motors
15 TIGERFLOW TEFC motors, 3/4 to 30 HP, for CD vertical multistage pump ends.
3/4 to 30 HP
230/460V 3Ph or 115/230V 1Ph
NEMA C-Face, 56C to 286TSC
TEFC, 2-Pole, 3500 RPM
Approx. 27-431 lb Weight
Overview

These are TIGERFLOW’s own TEFC motors in NEMA C-face frames, 56C through 286TSC, the motors the CD vertical multistage pumps are built with. Use one to replace a failed motor on a CD pump, or to complete a CD pump end. Three-phase motors are 230/460V; single-phase motors at 3/4, 1 and 2 HP are 115/230V. Match the frame and horsepower to the pump end; the table below shows which CD series use each one.

  • TEFC enclosure, 2-pole, 60 Hz
  • NEMA C-face frames 56C to 286TSC
  • Service factor rated: under nameplate conditions the motor carries continuous overload up to rated HP times the service factor
What Ships and What It Needs to Run

Included: the TIGERFLOW TEFC motor of the HP, voltage and frame selected.

Motor protection required, ordered separately: a motor-protective circuit breaker or starter set to the nameplate current, wired by qualified personnel.

Pump end: ordered separately; see our CD pump ends.

Genuine TIGERFLOW equipment, factory-new in original packaging — sold and supported by Watermain Supply, an independent industrial supplier.
12-Month TIGERFLOW Warranty

Covered for 12 months from the date of purchase under TIGERFLOW’s published warranty terms.

Specifications
Enclosure TEFC
Poles and speed 2-pole, 3500 RPM, 60 Hz
Voltage 230/460V 3Ph (all HP); 115/230V 1Ph at 3/4, 1 and 2 HP
Frames 56C, 182TC, 184TC, 213TC, 215TC, 254TC, 256TC, 284TSC, 286TSC
Altitude Above 3,300 ft, a 1.15 or higher service factor reduces to an effective 1.0 because thinner air cools less (TIGERFLOW CD guide)
Which Motor Fits Your Pump

Frame, part number and the CD series built with each motor

HP and voltage Frame Part No. CD series
3/4 HP · 115/230V 1Ph 56C 3200026079 CD3
3/4 HP · 230/460V 3Ph 56C 3200026076 CD3
1 HP · 115/230V 1Ph 56C 3200026078 CD3, CD5
1 HP · 230/460V 3Ph 56C 3200026075 CD3, CD5
1-1/2 HP · 230/460V 3Ph 56C 3200025675 CD3, CD5
2 HP · 115/230V 1Ph 56C 3200026077 CD3, CD5, CD10
2 HP · 230/460V 3Ph 56C 3200025075 CD3, CD5, CD10
3 HP · 230/460V 3Ph 182TC 3200025076 CD3, CD5, CD10
5 HP · 230/460V 3Ph 184TC 3200025147 CD3, CD5, CD10, CD15, CD20
7-1/2 HP · 230/460V 3Ph 213TC 3200025077 CD5, CD10, CD15, CD20, CD32, CD42
10 HP · 230/460V 3Ph 215TC 3200023859 CD10, CD15, CD20, CD32
15 HP · 230/460V 3Ph 254TC 3200026073 CD10, CD15, CD20, CD32, CD42, CD65, CD85
20 HP · 230/460V 3Ph 256TC 3200025078 CD15, CD20, CD32, CD42, CD85
25 HP · 230/460V 3Ph 284TSC 3200026072 CD15, CD20, CD42, CD65, CD85
30 HP · 230/460V 3Ph 286TSC 3200026071 CD42, CD85

Frames and part numbers from the TIGERFLOW 2026 price list; the 7-1/2 HP frame column reads 182TC there, and the description and CD catalog give 213TC. CD series from the CD Series catalog size tables.

Before You Order
Check the frame stamped on the pump end and the motor nameplate before ordering: horsepower, voltage, phase and frame must all match. Weights shown are approximate (pump-and-motor weight less wet-end weight in the CD catalog).
For engineering-led sizing and selection support or a factory submittal, email sales@watermainsupply.com or call 1-888.510.4036.
© Watermain Supply — A division of E4 Industrial LLC
Data Sheet
CD Vertical Multistage Pump Product Guide, 60 Hz (L18341-01)
Videos

Product videos are being added to this listing. For a walkthrough in the meantime, email sales@watermainsupply.com.

Share E-mail

You May Also Like