Menu
Your cart is empty
Looks like you haven't added anything to your cart yet
Goulds AquaCase
Xylem Pumps › Goulds Water Technology › AquaCase
Goulds AquaCase AC10
Goulds AquaCaseAll-In-One Residential Pressure Boost
Complete packaged residential pressure boosting system in a single compact case — variable speed pump, motor, pressure sensor, smart controller, and tank. Wi-Fi and Bluetooth monitoring via free smartphone app. UL Type 3R outdoor rated. NSF 61 certified for drinking water.
AquaCase at a Glance
Open the box and boost with confidence — pump, motor, controller, and tank in one weatherproof case ready to install.
38 GPM
Maximum Flow
20 GPM at 50 PSI nominal on 230V (max 38 GPM at lower head). 115V model delivers 10 GPM at 56 PSI nominal (max 30 GPM). Variable speed adjusts to demand.
80 PSI
Maximum Setpoint
Field-adjustable pressure setpoint up to 80 PSI (5.52 bar). Maintains constant pressure regardless of demand changes.
3R
UL Type 3R Rated
NEMA 3R enclosure rated for outdoor installation. Operating temperature 32°F to 122°F. Ready for direct outdoor service.
48 lb
Total Weight
Compact 21.4" × 11.3" × 13" form factor. 48 lb installed weight including pump, motor, controller, sensor, and tank — all in one case.
About the AquaCase AC10
A new approach to residential pressure boost — eliminate the multi-component installation.
Goulds Water Technology AquaCase delivers complete residential pressure boosting in a single compact, weatherproof case. Variable speed pump, motor, pressure sensor, smart controller, and integrated tank — all pre-engineered, pre-wired, and pre-tested at the factory. No multi-component installation, no field plumbing of tank-pump-controller assemblies, no wiring between components. Open the box, connect input water and discharge, plug in, and boost.
The AC10 model addresses a common residential problem: low water pressure from the municipal supply. Typical home water pressure drops sharply when demand peaks (multiple fixtures running simultaneously). AquaCase makes up the pressure difference at peak demand, delivering constant pressure throughout the home. It can also re-pressurize water from a cistern or holding tank where municipal supply isn't available.
Built-in Bluetooth and Wi-Fi connectivity enables remote monitoring and control through a free smartphone app. Real-time system feedback, automatic data logging, and protection alerts — dry run, motor overcurrent, open lead, low system pressure, overheating, short circuit, over/under voltage. Field-upgradable software unlocks new features without removing the unit from service.
AquaCase Features
Engineering features that make AquaCase the residential boost system of choice.
Plug-and-Play Installation
Pump, motor, controller, sensor, and tank in one compact unit. Ready to install with minimal setup — typical installation under 1 hour.
Variable Speed Control
Advanced speed control technology adjusts motor speed to match demand. Maximizes energy savings without compromising delivered pressure.
Wi-Fi & Bluetooth
Monitor and control via free smartphone app. Real-time system feedback, performance data, and protection alerts on demand.
Dual Mechanical Seals
Integrated primary and secondary mechanical seals for long-life, leak-free operation. Sealed dual-seal design extends service life.
Outdoor Rated (UL 3R)
NEMA Type 3R enclosure designed for outdoor installation. No pump house or weather shroud required.
Comprehensive Protection
Built-in safeguards: dry run, motor overcurrent, open lead, low system pressure, overheating, short circuit, over/under voltage.
Quiet Operation
Engineered for low-noise output. Variable-speed motor runs at lower speeds during partial demand — reduced noise vs constant-speed boosters.
Field-Upgradable Software
Unlock new features and performance improvements without removing the unit from service. Future-proofed via firmware updates.
Integrated Data Memory
Automatically logs key operational data — run time, start count, fault history. Diagnostics built in for service and warranty support.
AquaCase AC10 Specifications
Complete technical specifications for the AC10 model in 115V and 230V configurations.
Pump Performance — Voltage Comparison
| Specification | 115V Single Phase | 230V Single Phase |
|---|---|---|
| Pump Designation | 10 GPM at 56 PSI | 20 GPM at 50 PSI |
| Maximum GPM | 30 GPM (113.5 LPM) | 38 GPM (143.8 LPM) |
| Maximum Setpoint | 80 PSI (5.52 bar) | 80 PSI (5.52 bar) |
| Breaker Size | 15A | 15A |
| Power Lead | 115V plug, 6 ft cord | 230V hardwire |
Always follow national and local wiring codes. 230V configuration is preferred for higher demand applications.
Shallow Well Performance Rating (115V — GPM at Discharge Pressure)
| Suction Lift | 30 PSI | 40 PSI | 50 PSI | 60 PSI | 70 PSI | Max Shutoff |
|---|---|---|---|---|---|---|
| 5 ft (1.5 m) | 22.3 GPM | 18.0 GPM | 13.7 GPM | 9.5 GPM | 5.2 GPM | 80 PSI |
| 10 ft (3.0 m) | 21.0 GPM | 16.7 GPM | 12.4 GPM | 8.2 GPM | 3.9 GPM | 80 PSI |
| 15 ft (4.6 m) | 20.1 GPM | 15.8 GPM | 11.5 GPM | 7.1 GPM | 2.8 GPM | 80 PSI |
| 20 ft (6.1 m) | 19.4 GPM | 15.0 GPM | 10.5 GPM | 6.1 GPM | 1.6 GPM | 70 PSI |
| 25 ft (7.6 m) | 16.5 GPM | 13.5 GPM | 9.8 GPM | 4.3 GPM | — | 65 PSI |
230V model delivers higher GPM across the same operating envelope — see brochure for full 230V performance data.
Physical & Electrical Specifications
| Specification | Value |
|---|---|
| Dimensions (H × W × D) | 21.4" × 11.3" × 13" (544 × 287 × 330 mm) |
| Weight | 48 lb (21.7 kg) |
| Input Power | Single phase 115V or 230V |
| Programming | Pre-programmed at factory |
| Input Controls | HMI screen with push button controls |
| Status Indicators | Red and blue LED indicators |
| Operating Temperature | 32°F – 122°F (0°C – 50°C) |
| Enclosure | UL Type 3R (NEMA 3R) — outdoor rated |
| Standard Warranty | 24 months / 30 months (install / date code) |
| GPDA Extended Warranty | 36 months / 42 months (install / date code) |
Certifications
| Certification | Coverage |
|---|---|
| NSF / ANSI 61 | Drinking water system components — chemical leaching standards |
| NSF / ANSI 372 | Lead content compliance for drinking water |
| FCC Class B | Electromagnetic interference compliance |
| Bluetooth | Bluetooth wireless certification |
| CSA / UL | Canadian and US safety standards |
| California Proposition 65 | Compliant with California chemical disclosure |
| TSCA 40 CFR 751 | Toxic Substances Control Act compliance |
AquaCase Applications
Where AquaCase is specified — residential, light commercial, and small irrigation pressure boost.
Residential Pressure Boost
Single-family homes with low municipal water pressure. AquaCase makes up the pressure difference at peak demand for constant pressure throughout the home.
Cistern / Holding Tank Repressurization
Re-pressurize water from a cistern, well storage tank, or rainwater collection system to deliver consistent pressure to the home or building.
Multi-Unit Dwellings
Small multi-family buildings, duplexes, and townhomes where pressure boost is required for upper floors. Compact form factor fits utility room installations.
Irrigation & Sprinklers
Residential irrigation and sprinkler systems requiring consistent flow and pressure. Variable speed adjusts to zone-by-zone demand changes.
Basement / Utility Room Installs
Compact 21.4" × 11.3" × 13" footprint fits standard utility room placement. Outdoor-rated for installation in unconditioned spaces.
Light Commercial Buildings
Small commercial buildings, offices, and retail spaces requiring residential-class pressure boosting with smart monitoring.
AquaCase Sizing Support
Quick decisions to confirm AquaCase is right for your application.
Voltage Selection
230V configuration is preferred for households with 3+ bathrooms or simultaneous high-demand fixtures (laundry + shower + dishwasher). 115V suits smaller homes and apartments.
Setpoint Configuration
Standard residential boost: 50–60 PSI setpoint. Higher setpoint (70–80 PSI) for tall homes or distant fixtures. Field-adjustable through HMI.
AquaCase vs Hydrovar X
AquaCase: single-family residential, 38 GPM max. Hydrovar X (e-HVX/e-HVXR/e-HMX): commercial buildings, multi-pump systems, higher flow capacity.
Installation Requirements
15A breaker, inlet pressure source (municipal or cistern), discharge plumbing to home distribution. Wi-Fi access for app connectivity (optional).
Request an AquaCase Quote
Fill in your application details and you'll have a sized recommendation, configuration, and pricing within 24 hours.
AquaCase — Frequently Asked Questions
Should I choose 115V or 230V AquaCase?
230V is preferred for most installations — it delivers higher flow capacity (38 GPM max vs 30 GPM on 115V) and operates more efficiently. Choose 230V if your home has 3+ bathrooms or you regularly run multiple high-demand fixtures simultaneously. 115V is sufficient for smaller homes, apartments, and applications where the existing electrical service doesn't include 230V.
Can AquaCase work with my well system?
Yes — AquaCase can re-pressurize water from a cistern or storage tank. If your well system uses a storage tank (gravity-fed or pump-fed) before distribution, AquaCase can boost from the tank to deliver consistent pressure throughout the home. For direct well-to-home applications without a storage tank, you'd typically use a Goulds jet pump or submersible pump instead — those are designed for direct well service.
What does the smartphone app do?
The free Goulds smartphone app connects via Bluetooth (local) or Wi-Fi (remote) for real-time system monitoring and control. View current operating pressure, motor speed, run time, fault history, and energy usage. Configure pressure setpoints, schedule downtime, and receive alerts for protection events (dry run, overheating, etc.). Also enables future firmware updates without removing the unit from service.
Can AquaCase be installed outdoors?
Yes — UL Type 3R rating qualifies AquaCase for outdoor installation. Rain, dust, and incidental water spray are not problems. Operating temperature range is 32°F to 122°F — in colder climates, the system should be installed in a location protected from freezing (or with appropriate freeze protection). The outdoor rating makes AquaCase ideal for utility-room installations in unconditioned spaces.
How does AquaCase compare to a separate pump + tank + controller setup?
A traditional residential boost system requires field assembly of separate components: pump, pressure tank, pressure switch, controller, wiring, and plumbing connections. AquaCase replaces all of that with a single pre-engineered, pre-tested unit. Faster installation (under 1 hour typical vs half a day), no field-wiring errors, factory-tested operation, integrated smart controls, and a single warranty point.
Is AquaCase NSF certified for drinking water?
Yes — NSF/ANSI 61 and 372 certified for drinking water service. NSF 61 limits chemical leaching from pump materials in contact with drinking water. NSF 372 limits lead content. Both are required for residential drinking water applications in most jurisdictions and are commonly required by local plumbing codes.
What's the typical lead time on AquaCase?
AquaCase AC10 typically ships within 2–4 weeks from order. As a single-SKU product (with voltage as a configuration option), inventory is generally well-stocked at Goulds distribution centers. Exact lead time confirmed on every quote.
Need an AquaCase Pressure Booster?
Send us your application — voltage, fixture count, inlet pressure — and you'll have configuration recommendations and pricing within 24 hours.
281.664.8000
Goulds Water Technology and AquaCase are trademarks of Xylem Inc. and its subsidiaries.
Goulds is a registered trademark of ITT Manufacturing Enterprises LLC and is used under license. Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial distributor based in Houston, Texas.
Goulds is a registered trademark of ITT Manufacturing Enterprises LLC and is used under license. Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
Watermain Supply is a DBA of E4 Industrial LLC, an independent industrial distributor based in Houston, Texas.
- Choosing a selection results in a full page refresh.