Jet Pump Motor | Nema C

HP: 3/4 HP
Volt: 230/115
MAP
Price
$533.33
SKU: 6127-154
Weight: 21.0 lb
Free Shipping $499 or more
Available For Order! Call Sales Counter for accurate lead-time!
Description

Baker Water Systems Nema C (Keyed Shaft) Motor for 1500 Series Jet Pumps. Single phase, Open Drip Proof (ODP) capacitor start. Carbon steel shaft not in contact with water. Shaft 0.625" diameter x 2.07" long from face. Continuous duty at 40°C/104°F ambient, 60Hz. Automatic reset thermal overload protector. Round frame without base, Nema 56C mounting. Power leads and ground wire supplied. Voltage change device included.

Technical Details
  • Carbon steel shaft (not in contact with water)
  • Shaft 0.625" diameter x 2.07" long from face
  • Ball bearings (locked drive end bearing)
  • Continuous duty at 40°C/104°F ambient, 60Hz
  • Automatic reset thermal overload protector
  • Round frame (without base), Nema 56C mounting
  • Power leads and ground wire supplied
  • Voltage change device included
  • Factory wired 230V
  • Frame: 48/56 | Voltage: 230/115
Nema C Motor
For 1500 Series Jet Pumps (Single Phase, ODP, Keyed Shaft, Capacitor Start)
Two Compartment Products | E-Z Access
Part No. HP RPM Frame Catalog Volt Type Service Factor SF* Amps MTR Lgth (1) Ship Wt. Factory Wired
6127-154 3/4 3500 48/56 230/115 FHP 1.5 7.4/14.8 9.5" 21 230V
6127-160 1 3500 48/56 230/115 FHP 1.65 9.0/18.0 10" 24 230V
6127-156 1 1/2 3500 48/56 230/115 FHP 1.3 10.7/21.4 10.5" 28 230V
*Service Factor Amps may vary with motor manufacturer - refer to label on motor
*Includes run capacitor for higher efficiency
(1) Length not including shaft
(2) Contact factory for three phase and/or TEFC motors
Datasheets

Related products